Security Camera King IPPTZ-EL2MPL12X-Mini-F User manual

IPPTZ-EL2MPL12X-Mini-F Operation Manual
Version 1.0.0

i
Table of Contents
1Network Connection ...................................................................................................................1
1.1 Preparation.....................................................................................................................1
1.2 Log in ..............................................................................................................................1
1.3 Live Interface .................................................................................................................3
1.4 Encode Setup ................................................................................................................3
1.5 Video Window Setup ....................................................................................................4
1.6 System Menu.................................................................................................................5
1.7 Video Window Function Option ..................................................................................6
1.8 PTZ Control....................................................................................................................7
1.9 PTZ Setup/Menu ...........................................................................................................7
2Playback .....................................................................................................................................10
2.1 Playback Interface ......................................................................................................10
2.2 Playback Control Button ............................................................................................10
2.3 Date...............................................................................................................................11
2.4 File List .........................................................................................................................11
2.5 Process bar format .....................................................................................................13
3Setup...........................................................................................................................................14
3.1 Camera .........................................................................................................................14
3.1.1 Conditions.............................................................................................................14

ii
3.1.2 Video......................................................................................................................24
3.1.3 Audio......................................................................................................................29
3.2 Network.........................................................................................................................30
3.2.1 TCP/IP...................................................................................................................30
3.2.2 Connection............................................................................................................32
3.2.3 PPPoE...................................................................................................................34
3.2.4 DDNS.....................................................................................................................34
3.2.5 IP filter....................................................................................................................35
3.2.6 SMTP （e-mail）.................................................................................................36
3.2.7 UPnP......................................................................................................................37
3.2.8 SNMP.....................................................................................................................39
3.2.9 Bonjour ..................................................................................................................40
3.2.10 Multicast .........................................................................................................41
3.2.11 IEEE802 .........................................................................................................42
3.2.12 Qos..................................................................................................................43
3.3 PTZ................................................................................................................................44
3.3.1 Protocol..................................................................................................................44
3.3.2 Function.................................................................................................................45
3.4 Light...............................................................................................................................55
3.4.1 IR Light ..................................................................................................................55
3.5 Event .............................................................................................................................56
3.5.1 Video detect..........................................................................................................56
3.5.2 Alarm......................................................................................................................60
3.5.3 Abnormality...........................................................................................................61
3.6 Storage .........................................................................................................................64
3.6.1 Record schedule and snapshot schedule/Holiday..........................................64
3.6.2 Destination............................................................................................................64
3.6.3 Record control......................................................................................................66
3.7 System..........................................................................................................................67
3.7.1 General..................................................................................................................67
3.7.2 Account..................................................................................................................69
3.7.3 Default....................................................................................................................72
3.7.4 Import/Export........................................................................................................72

iii
3.7.5 Auto maintenance................................................................................................73
3.7.6 Firmware update..................................................................................................74
3.8 Information ...................................................................................................................74
3.8.1 Version...................................................................................................................74
3.8.2 Log..........................................................................................................................74
3.8.3 Online User...........................................................................................................76
4Alarm...........................................................................................................................................77
5Log out........................................................................................................................................78
Important
The following functions are for reference only. Some series products may not
support all the functions listed below.
Usually we recommend IE 7 or higher version. For those versions below IE 7, it
may not support the operation of some functions.

1
1Network Connection
1.1 Preparation
This series speed dome product supports the Web access and management via PC.
Web includes several modules: monitor channel preview, PTZ control, system configuration, alarm and
etc.
Please follow the steps listed below for network connection.
Make sure the speed dome has connected to the network properly.
Speed dome IP address and PC IP address shall be in the same network segment. If there is router,
please set the corresponding gateway and subnet mask.
Use order ping ***.***.***.***(* speed dome address) to check connection is OK or not.
1.2 Log in
Open IE and input speed dome address in the address bar.
For example, if your device IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
bar. See Figure 1-1.
Figure 1-1
The login interface is shown as below. See Figure 1-2.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
Input your IP
address here

2
Figure 1-2
If it is your first time to login in, system pops up warning information to ask you whether install control
webrec.cab or not. Please click OK button, system can automatically install the control. When system is
upgrading, it can overwrite the previous Web too.
If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the
control download. Or you can lower the IE security level. See Figure 1-3.
Figure 1-3

3
1.3 Live Interface
After you logged in, you can see the live monitor window. Now you can operate the speed dome via the
WEB. See Figure 1-4.
Figure 1-4
There are six sections:
Section 1: Encode setup bar
Section 2: Window adjust bar
Section 3: System menu bar
Section 4: Window function option bar
Section 5: PTZ control
Section 6: PTZ function
1.4 Encode Setup
The encode setup interface is shown as in Figure 1-5.
Figure 1-5
Please refer to the following sheet for detailed information.

4
Parameter
Function
Main stream
In normal network width environment, main stream can record
video file and realize network monitor.
Sub (Extra)
stream
If network width is not sufficient, you can use sub stream to
realize network monitor. It is to reduce network bandwidth
usage.
Protocol
You can select video monitor protocol from the dropdown list.
There are three options: TCP/UDP/Multicast.
1.5 Video Window Setup
The interface is shown as in Figure 1-6.
Figure 1-6
Please refer to the following sheet for detailed information.
SN
Parameter
Function
1
Image
control
Click it to open picture setup interface. See Figure 1-7. This
interface is on the top right pane.
2
Original
size
Click this button to go to original size. It is to display the actual
size of the video. It depends on the resolution of the video.
3
Full screen
Click it to go to full-screen mode. Double click the mouse or
click the Esc button to exit the full screen.
4
Width and
height ratio
Click it to restore original ratio or suitable window.
5
Open/close
PTZ
interface
Left click it to display or hide the PTZ control interface.
The picture setup interface is shown as in Figure 1-7.
1 2 3 4 5
6

5
Figure 1-7
Please refer to the following sheet for detailed information.
Parameter
Function
Video
setup
Brightness setup icon. It is to adjust
monitor video brightness.
Note:
All the operations here
apply to WEB end
only.
Please go to Setup-
>Camera->Conditions
to adjust brightness,
contrast, hue and
saturation setup.
Contrast setup icon. It is to adjust
monitor video contrast ness.
Saturation setup icon. It is to adjust
monitor video saturation.
Hue setup icon. It is to adjust
monitor video hue.
Reset
Restore brightness, contrastness
saturation and hue to system default
setup.
--- Original size button. It is to display video actual size. It depends on the video resolution.
--- Full-screen button. Double click or click Esc button to exit full-screen mode.
--- Width and height rate. Adjust to original size or suitable for the window.
--- Fluency setup. It has three modes: real-time/general/fluency.
---Open/close PTZ interface. Left click mouse to display or hide PTZ control interface.
1.6 System Menu
System menu is shown as in Figure 1-8.

6
Please refer to chapter 1.3 Live, chapter 2 Playback，Chapter 3 Setup, chapter 4 Alarm, chapter 5 Log
out for detailed information.
Figure 1-8
1.7 Video Window Function Option
The interface is shown as below. See Figure 1-9.
Figure 1-9
Please refer to the following sheet for detailed information.
SN
Parameter
Function
1
Remark
Click it and then select pen color, you can write down the
mark information on the preview interface.
2
Alarm
output
Click it to generate an alarm output and the button becomes
red. Click it again to stop alarm output.
There is only one alarm output icon since this series product
supports one relay output.
Please note the alarm output interface may vary due to
different series products.
3
Digital
zoom
When video is in original status, click this button you can
select any zone to zoom in. After zoom in ,you can drag the
zoom in area in the specified area. Right click mouse system
restores original status. You can use the wheel to zoom out
the video.
4
Snapshot
You can snapshoot important video.
You can go to Setup->Camera->Video->Path to modify the
local record save path.
5
Triple snap
Click it, system can snap at 1f/s for three times. All images
are memorized in system storage folder.
6
Record
When you click local record button, the system begins
recording.
You can go to Setup->Camera->Video->Path to modify the
local record save path.
7
Audio
output
Turn on or off audio when you are monitoring.
You can go to Setup->Camera->Audio to set.

7
8
Bidirectional
talk
Click it to begin audio talk. You can go to Setup->Camera-
>Audio to set bidirectional talk mode.
9
Help
Click it to open help file.
1.8 PTZ Control
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please go to Setup-
>System->PTZ to set.).
Here you can view direction keys, speed, zoom, focus, iris button. See Figure 1-10.
PTZ direction: PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right/ fast positioning.
Speed: The step 8 speed is faster than step 1.
Figure 1-10
1.9 PTZ Setup/Menu
The PTZ setup/Menu interface is shown as in Figure 1-11.

8
Figure 1-11
Click PTZ set button, the interface is shown as in Figure 1-12.Here you can select scan, preset, tour
pattern, assistant function and etc.
Figure 1-12
Please refer to the following sheet for PTZ setup information.
Parameter
Function
Scan
Select Scan from the dropdown list, click Start button, you can
begin scan operation. Default SN is 1.
Preset
Input the preset value and then click View button, the camera
turns to the corresponding position of the preset.

9
Parameter
Function
Tour
Select Tour from the dropdown list and then click Start button,
you can begin tour.
Pattern
You can select Pattern from the dropdown list and then click
Start button to begin PTZ movement.
Assistant
Reserved assistant function.
Goto
It is the accurate positioning function. Please input
corresponding horizontal angle, tilt angle, and speed dome
zoom speed and then click Goto button to go to a specified
position.
One unit of the horizontal angle or tile angle stands for 0.1
degree.
Pan
Select Pan from the dropdown list and then click Start button, you
can turn the PTZ realize 360 degrees movement. Click Stop button
to stop current operation.
For detailed setup information, please go to Setup->PTZ-Function.
Click button to begin a PTZ operation. Now you can see it becomes Stop button. Click it
again to stop current PTZ operation.

10
2Playback
2.1 Playback Interface
The playback interface is shown as in Figure 2-1.
Figure 2-1
You can refer to the following sheet for detailed information.
SN
Name
1
Playback control button
2
Date
3
File list
4
Time process format
2.2 Playback Control Button
Playback control button is shown as below. See Figure 2-2.

11
Figure 2-2
You can refer to the following sheet for detailed information.
SN
Name
Function
1
Play
To start or resume playback.
2
Stop
Stop current playback.
3
Frame by frame
Play next frame.
Please pause playback first if you want to use
frame by frame playback function.
4
Slow play
Slow playback.
5
Fast play
Fast playback.
6
Mute
Click it to mute. Click it again to restore audio
function.
7
Volume
Set record volume level.
2.3 Date
The colors here have different meanings.
Green: Current selected data.
Yellow: Current date has record file.
Blue: Current data has record file and it has been selected.
You can check the corresponding file record here to view the file record you are interested.
2.4 File List
Click , you can go to file list interface. See Figure 2-3. Double click a record file to begin
playback, at the same time, you can view file size, file start time and file end time.
The different colors here has different meansings.
Green: Normal record.
Yellow: Motion detect record.
Red: Alarm record.
Blue: Manual record.

12
Figure 2-3
You can refer to the following sheet for detailed information.
Icon
Name
Function
Search
It is to search record from the start time of you
selected date to the previous 24 hours.
Stop
Click it to download selected file(s) to local
PC.
Back
Click it to go back to calendar interface to
select date again.

13
2.5 Process bar format
You can refer to the following sheet for detailed information.
Icon
Function
Process bar is in 24H mode.
It is to display the record files of previous two
hours.
It is to display the record files of previous one
hour.
It is to display the record files of previous 30
minutes.

14
3Setup
3.1 Camera
3.1.1 Conditions
Here you can set camera property. Adjust video parameter to get best preview effect. See Figure 3-1.
Figure 3-1
Please refer to the following sheet for detailed information.
Parameter
Function
Config File
Here you can set camera setup mode. It includes:
normal/day/night.
White Balance
It is to set camera white balance. It includes:
auto/manual/ATW/outdoor/indoor/outdoor auto/sodium light
auto/sodium light.
Exposure
It is to set camera exposure mode. It includes:
auto/manual/aperture has the priority/shutter has the priority.
NR
It is to set camera denoise mode. It: is 2D/3D noise reduction.
Day/Night
It is to set camera day/nigh switch mode.
The type includes: electronic/mechanical.
It includes four modes: auto/B&W/Color/Photosensor.
Focus
It is to set camera focus mode. It includes: auto/manual/semi
auto.

15
Zoom
It is to set digital zoom/camera zoom rate. You need to check
the box here to enable digital zoom function.
Sharpness
It is to set camera lens sharpness, and sharpness control level.
Picture
It is to set camera video. It includes:
style/hue/brightness/saturation/ chroma control/gamma/picture
flip/picture freeze.
Default
It is to restore factory default setup.
Important
Please make sure your purchased camera supports all the functions listed here.
3.1.1.1 White Balance
White balance interface is shown as below. See Figure 3-2.
Figure 3-2
Please refer to the following sheet for detailed information.
Parameter
Function
WB mode
It is to set camera white balance. It includes:
auto/manual/ATW/outdoor/indoor/outdoor auto/sodium
light auto/sodium light.
For manual mode, you can input red gain and blue gain
value.
3.1.1.2 Exposure
Exposure interface is shown as below. See Figure 3-3.

16
Figure 3-3
Please refer to the following sheet for detailed information.
Parameter
Function
Exposure mode
It is to set camera exposure mode. It includes:
auto/manual/aperture has the priority/shutter has the
priority. The default setup is auto.
For the auto exposure mode, the gain, shutter and iris are
in auto mode.
For manual exposure mode, the gain, shutter and aperture
is in manual mode.
When the aperture has the higher priority, the aperture is
in the manual mode and the gain and shutter is in auto
mode.
When the shutter has the priority, the shutter is in manual
mode, gain and aperture is in auto mode.
Exposure
compensation
It can adjust video whole brightness via setting exposure object
brightness so that it can suit for different environments.
Gain level
It is to set video brightness under the low illumination
environments.
Shutter
It is to set camera exposure time.
Iris
It is to set camera iris.
Slow exposure
If the light may change greatly, you can use slow exposure to
get image so that the camera can get stable video.
Max Auto gain
It is to set camera max gain.