MENU
PTZ Camera
Network Cable Network Cable
Switch
Router Computer
4
450043001239 A2
Network Connection
5 Preset Description
Here we take accessing IP camera via LAN for example.
●Access the camera through IP-Tool
①Make sure that the camera and the PC are connected via LAN.
②Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Device Network Search
Immediate Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.2 26.201
192.168.1 .2
192.168.1 .3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Netw ork Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :3 5 :22
192 . 168 . 226 . 201
255 . 255 . 255 . 0
192 . 168 . 226 . 1
i
Tip: Enter the administrator password, and
then modify t he network parameters.
Total Device: 3
Local IP Address:192.168.1.4Subnet Mask:255.255.255.0 Gateway: 19 2.168.1.1 DNS：210.21.196.6
Device Name Device Type IP Address Http Port Data Port Subnet
Product Mod el
About
Subnet Mask
Gateway
Restore IPC Default Configuration
③Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as the
computer’s. Please modify the IP address of your device according
to the practical situation.
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192 . 168 . 1 . 201
255 . 255 . 255 . 0
192 .168 . 1 . 1
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So the
IP address of the camera shall be changed to 192.168.1.X. After
modification, please enter the password of the administrator and click
“Modify” button to modify the setting.
The default password of the administrator is “123456”.
④ Double-click the PTZ camera listed in the IP-Tool or manually enter
the IP address in the address bar of the web browser to connect the PTZ
camera. Then follow directions to download and install the plugin.
Enter the username and password in the login interface.⑤
The default username is admin; the default password is 123456.
Call Preset
Call No.90 Preset Run trace 1
Run cruise 1
Run 2cruise
Run 3cruise
Run 4cruise
OSD menu
Enable random scan
Enable auto scan
Save the left scan endpoint
Save the right scan endpoint
Save the random scan start point
Call No.91 Preset
Call No.92 Preset
Call No.93 Preset
Call No.94 Preset
Call No.95 Preset
Call No.97 Preset
Call No.99 Preset
Save No.91 Preset
Save No.92 Preset
Save No.93 Preset
Save Preset
Name:
Password:
Stream Type:
Language
Remember me
admin
1920x1080 25fps
English
Password
Login
Ceiling Mounting
1
diagram.
. Install the ceiling mounting bracket according to the following
2
bracket and secure it with a screw.
. Mount the adapter tube to the 3 Secure the ceiling mounting
bracket to the ceiling.
.
Adapter tube
4 Connect cables and then hook
the safety wire to the adapter tube.
. 5 Fasten the PTZ camera to the
adapter tube with screws firmly.
.
