Bartscher 200085 User manual

6L
200085
Original-Gebrauchsanleitung
V1/0918

- 19 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Key to symbols..................................................................................................... 20
1.2 Safety instructions................................................................................................ 21
1.3 Use as intended ................................................................................................... 25
1.4 Use against the intended purpose........................................................................ 25
2. General information................................................................................................ 26
2.1 Liability and Warrantees....................................................................................... 26
2.2 Copyright protection ............................................................................................. 26
2.3 Declaration of conformity...................................................................................... 26
3. Transport, packaging and storage......................................................................... 27
3.1 Delivery check...................................................................................................... 27
3.2 Packaging............................................................................................................. 27
3.3 Storage................................................................................................................. 27
4. Technical data ......................................................................................................... 28
4.1 Overview of parts ................................................................................................. 28
4.2 Technical specification ......................................................................................... 30
5. Installation and operation....................................................................................... 31
5.1 Installation............................................................................................................ 31
5.2 Operation.............................................................................................................. 32
6. Cleaning and descaling.......................................................................................... 34
7. Waste disposal........................................................................................................ 36
Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com
GB/UK

- 20 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation
and maintenance of the device and should be consulted as an important source
of information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance
or cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
DANGER!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.

- 21 -
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
HOT STEAM!
This symbol indicates that during the operation the hot steam escapes from the
device. Risk of scalding if safety instructions are not observed!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
The device is not intended for use by individuals (including
children) with physical or mental disabilities, insufficient
experience, and/or insufficient knowledge unless such persons
are under the care of a person responsible for their safety or
have received instructions regarding appropriate use of the
device.
Children should be observed to ensure that they are not playing
with or starting the device.
Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!
Never leave the device unattended when in use.
Only use the device indoors.

- 22 -
The device must be operated in correct and safe technical
condition only. In case of operational problems disconnect the
device from the power supply (pull the plug from the socket) and
contact the service company.
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
Follow the safety instructions below to avoid the hazard:
Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step
on or trip over the cable.
The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.
Do not cover the cable. Keep away the cable from operating
range.

- 23 -
Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Never immerse the appliance, the power cord and the power
plug in water or other liquids.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.
HOT SURFACE! Burn hazard!
Follow the safety instructions below to avoid the hazard:
The tank surface gets very hot when the device is in use! In
order to avoid burns of fingers and hands do not touch hot
surfaces of the device! During operation touch only handles
and switches designed for such purpose.

- 24 -
The surface and water in the tank are hot for some time also
after turning the device off, leave it for cooling down before
cleaning or moving.
HOT STEAM! Risk of burns!
Follow the safety instructions below to avoid the hazard:
Follow the maximum filling capacity! Overfilling may lead to hot
water leaks and burns!
Never remove the lid during boiling! The released hot steam may
cause burns of hands, arms, and face.
WARNING! Health hazard due to germs!
Follow the safety instructions below to avoid the hazard:
The water tank must be regularly emptied out and disinfected to
eliminate the possibility of accumulation of harmful and
dangerous germs.
CAUTION!
In order to avoid any damage to the device follow the
instructions below:
Never wash the device or its elements in the dishwasher.

- 25 -
Do not use any sharp objects or abrasive cleaning agents for
surface cleaning.
Do not turn the device on if there is no water in the tank.
1.3 Use as intended
Every use of the device for a different purpose and/or in a way that diverges from the
intended use is not allowed and is assumed as the use against the intended purpose.
Any claims against the manufacturer or their authorized representatives as a consequence
of experiencing damage resulting from the use against the intended purpose are
inadmissible.
The liability for damage occurred during the use of the device against its intended
purpose is borne solely and exclusively by the user.
Safety operation of the device is guaranted only when it is used for its intended purpose
and according to the instructions included in this manual.
The device is intended for home use or in similar places such as:
in kitchens for store or office employees or in similar business areas;
in agricultural farms;
by guests of hotels, motels and other typical places of accomodation;
in Bed and Breakfast facilities.
The hot water dispenser is intended only for boiling and heating water.
1.4 Use against the intended purpose
Any use other than those mentioned in point “1.3 Use as intended“ is assumed as the
use against the intended purpose and is not allowed.
The use against the intended purpose may lead to severe injury or damage caused by
hazardous voltage, fire or high temperature. It is allowed to use the device to perform
only the work described in the instruction manual. Improper use may cause the device
damage.
Any manipulation with the device, assembly or maintenance work may be performed
exclusively by the authorized service staff.

- 26 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation of the device,
and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations
is copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 27 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
If you liked to dispose the packing, consider the regulations applicable
in your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-do not store outdoors,
-keep it dry and dust-free,
-do not expose it to aggressive media,
-do not expose it to direct sunlight,
-avoid mechanical shocks and vibration,
-in case of longer storage (> 3 months) make sure you check the state
of the packaging and the parts regularly, if required refresh or renew.

- 28 -
4. Technical data
4.1 Overview of parts
1
Lid handle
2
Lid
3
Water tank handle
4
Water tank
5
Power cable
6
Operation elements
7
Base unit
8
Outlet tap
9
Fill level indicator
1
7
3
4
5
8
2
9
6

- 29 -
Operating elements
A
Heating indicator light (red)
B
Power indicator (green)
C
ON/OFF switch
D
Temperature control knob “OFF“ position
E
Temperature control knob
F
Settings mark (device)
E
F
B
D
A
C

- 30 -
4.2 Technical specification
Description
Hot water dispenser 6L
Code- No.:
200085
Material:
Stainless steel, plastic
Model:
Temperature control:
Thermostatic (mechanical), stepless
Filling level display
Safety thermostat:
Control unit: Toggle
ON/OFF switch
Control lamps: Stand-by, heating-up
Capacity:
6 litres
Temperature range:
30 °C to 100 °C
Power supply:
1.8 kW / 230 V 50 Hz
Dimensions:
W 280 x D 290 x H 385 mm
Weight:
2.1 kg
We reserve the right to implement the technical modifications!
Safety thermostat
The device is equipped with the safety thermostat (overheating protection). If
the device is accidentally switched on with too little or no water and boils empty or
there is a lime and scale build-up inside, the device will switch off automatically.
Disconnect the device from the power supply (pull the plug!) and wait for cooling
down. If necessary, descale the device according to the instructions described
in the section “Descaling”. Refill the tank with drinking water and switch the
device on.
If overheating occurs again and the device does not function properly, please
contact the technical service or sales agent.

- 31 -
5. Installation and operation
5.1 Installation
Positioning
Unpack the device, remove and dispose of all package material according to
the environment protection regulations.
CAUTION!
Never remove the nameplate and warning signs from the device.
Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.
Never place the device on an inflammable surface.
Do not place the device near open flame, electric heaters or other heat source.
Never place the device at the edge of a table to avoid tilting or falling.
Never put the device in a moist or wet area.
When locating the device, make sure the power plug is easily accessible to
immediately unplug the device, if necessary.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.

- 32 -
5.2 Operation
Before the first use wash the device according to instructions in section 6 “Cleaning
and descaling”.
Pour the desired amount of drinking water into the tank (up to the “MAX“ indicator).
It is important that the potable water is always present in the tank during the device
operation. Do not fill the device with any non-potable liquids, like acids, lyes, oils,
nitrates, etc.!
NOTE!
To reduce heating time and save energy, the tank may be filled with hot water.
Time and energy are saved in such way!
Put the lid on the tank and rotate it clockwise
to close the tank (bayonet lock).
Make sure that the lid is equipped with a steam
release hole. With properly closed lid, this hole
should be aligned over the water level indicator.
HOT STEAM! Risk of burns!
During the operation avoid contact with this area of surface,
use protective gloves.
Connect the device to a single grounded socket. The green power control light will
come on.
Set required temperature in range from 30 °C to 100 °C with use of temperature
control knob.
Turn the device on using the ON/OFF switch.
The red heating indicator light will come on and will be lit during heating. As soon as
the water is heated to the set temperature, the red heating indicator light will go off.
If the temperature of water in the tank decreases by approx. 10 °C, the heating will
start again and the red heating indicator light will come on, and the water will be
heated again to the set temperature.

- 33 -
Use hot water to prepare various beverages, such as tea, instant coffee, chai latte or
other instant beverages.
Keep in mind than various types of tea required different water temperature. Follow
the instructions on the packages.
To use hot water put appropriate container
(glass, cup, mug) under the drain tap. Press
the tap lever down and hold it to receive
required amount of water.
Then release the lever, the tap will close
automatically.
Control the tank fill level with use of indicator.
CAUTION!
Monitor the water level regularly and add water if necessary.
Never use the device without water!
Before filling the tank with water again, turn the device off and disconnect from the
power supply.
HOT SURFACE! Risk of burns!
Do not touch the hot device! Use only designated knob controllers and
switches to operate the device.
Carefully remove the lid with lid handl and add the desired amount of water.
After the use, turn the temperature control knob to the “OFF” position by turning it
counterclockwise, then switch the device off using ON/OFF switch and remove its
plug from the socket.
Leave the remaining water to cool off, and then pour it into another container
using the drain tap.

- 34 -
6. Cleaning and descaling
WARNING!
Before cleaning, disconnect the device from the power supply (unplug!)
and leave to cool off.
The device is not suited for direct washing via water jets!
Protect the device from water penetration.
CAUTION!
Do not use any sharp or abrasive cleaning materials as they may damage the
device surface.
Regular cleaning
oClean the device after each use.
oWash the water tank interior with gentle washing agent and thoroughly rinse in running
water. To clean the drain tap flush it with clean water.
oWash the lid with running, warm water and rinse with clean water.
oWipe the external surfaces of the device with moist, soft cloth, use gentle cleaning
agent when required.
oDry the device with soft, clean cloth.

- 35 -
Descaling
CAUTION!
Failure to conduct regular descaling - in accordance with the
instructions - may be the basis for rejecting complaints.
The warranty does not cover this type of complaint!
Descale the device regularly!
oHard water may cause scaling in the water tank, thus extending the time needed to
heat water and possibly causing damage of the device. If possible, use filtered
water to avoid scaling!
oWe recommend using citric acid or vinegar for ecological descaling. Prepare a
solution of water with vinegar (3:1 ratio) or water with citric acid (2 table
spoons per 1 liter of water) and fill the tank. Wait some time (ca. 1 hour), and
then boil the solution.
oWait for the device to cool off.
oAfter cooling, pour out the descaling solution and rinse the tank several times with
clean water. Drain the clean water through the drain tap to thoroughly remove all
scaling solution leftovers.
oFollow manufacturer’s instructions if you choose to use other commercially available
descaling products.
Storing of the device
oIf the device is not used for a longer time, clean it thoroughly according to the
instructions above and store it in a dry, clean place, protected from cold, sunlight,
and children. Do not place any heavy objects on the device.

- 36 -
7. Waste disposal
Old devices
The electric devices are marked with this symbol. You must not
dispose of electric devices with household waste. When the
device may not be longer used each consumer is obliged to
dispose of the device at the dedicated local collection point,
separately from household waste.
NOTE!
Electric devices should be used and disposed of properly to prevent the impact on
the environment.
Disconnect the device from the power supply and remove the power cord from
the device.
Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com