Bartscher GL3-2005 User manual

GL3-2005
200298

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Technical Support Hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2023-05-08
EN
2

200298 1 / 24
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of Signal Words....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended Use ...........................................................................................6
1.4 Unintended Use.......................................................................................6
2General information.......................................................................................7
2.1 Liability and Warranty ..............................................................................7
2.2 Copyright Protection ................................................................................7
2.3 Declaration of Conformity ........................................................................7
3Transport, Packaging and Storage................................................................8
3.1 Delivery Check.........................................................................................8
3.2 Packaging................................................................................................8
3.3 Storage....................................................................................................8
4Technical Data...............................................................................................9
4.1 Technical Specifications ..........................................................................9
4.2 Functions of the Appliance.....................................................................10
4.3 List of Components of the Appliance .....................................................11
5Installation and operation ............................................................................12
5.1 Installation..............................................................................................12
5.2 Operation...............................................................................................17
6Cleaning and Maintenance..........................................................................21
6.1 Safety Instructions for Cleaning.............................................................21
6.2 Cleaning.................................................................................................21
6.3 Maintenance ..........................................................................................22
7Possible Malfunctions..................................................................................22
8Disposal....................................................................................................... 24

Safety
2 / 24 200298
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des Geräts u ndg ilt als wichtige Infor mationsquelle un dN achschlagewer k.Di e Kenntnis aller enthalt enenSic herheitshinw eiseu ndH andlungs anweisungen schafft die V oraussetzung für d as sichere und sac hgerechte Arbeite n mitd emG erät.D arüber hin aus müssen die für den Eins atzbereich des Geräts gelt enden örtlichen Un fallverhütungsvorsc hriften und allgemein en Sicherheitsb estimmungen eingehalt en werden. Diese Bedi enungsanleitung ist Bestandt eild es Produkts und muss i n unmittelbarer Nähe d es Geräts für das In¬stall ations-, Bedienungs- , Wartungs- und Reinigu ngspersonal jederzeit z ugänglich auf¬b ewahrt werden. Wenn das Ger ät an eine dritte Person
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.

Safety
200298 3 / 24
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical Current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.

Safety
4 / 24 200298
EN
•Always completely unwind the power cord.
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.
•Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Incorrect operation of th e appliance may cause fire or explosion hazard d uet oig nition of its content.
Fire hazard / flammable materials hazard / explosion hazard!
•Do not use any electric devices in the appliance.
•Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
•Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
•In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
•Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
•In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
•Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
•Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
•All ventilation slots should not be obstructed during operation.
•Never attempt to damage cooling installation of the appliance.

Safety
200298 5 / 24
EN
Operating Personnel
•The appliance may only be operated by qualified personnel and trained
specialist personnel.
•This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
•Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper Use
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.
•The appliance may only be used when all connections are executed according
to rules of law in force.
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your own.
•Do not introduce any changes in the appliance nor modify it.

Safety
6 / 24 200298
EN
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–Cooling food products in suitable GN containers.
The appliance is intended for operation in maximum ambient temperature of 32°C
and relative humidity of 65%.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
–Storing flammable or explosive objects and liquids, such as ether,
petroleum or adhesives;
–Storing explosive materials, like sprays filled with flammable propellants;
–Storing pharmaceutical products or preserved blood;
–Storing live pets.

General information
200298 7 / 24
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, Packaging and Storage
8 / 24 200298
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical Data
200298 9 / 24
EN
4 Technical Data
4.1 Technical Specifications
Name:
Cooling top unit GL3-2005
Art. No.:
200298
Material:
stainless steel | glass
Dimensions of glass top (W x D x H), in
mm:
1995 x 330 x 200
Temperature range, min.–max., in °C:
2 - 8
Number of GN containers:
10 x 1/4 GN
Max. GN container depth, in mm:
150
Climate class:
4
Coolant, amount in kg:
R290 / 0,045
Connected load:
0,130 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
2005 x 352 x 435
Weight, in kg:
47,0
We reserve the right to implement technical modifications.

Technical Data
10 / 24 200298
EN
Version / Characteristics
•Delivery form: self-assembly set (simple assembly)
•Cooling: compressor
•Temperature control: digital
•Control: electronic
•Digital display
•ON/OFF switch
•Indicator light: ON/OFF
•Automatic defrosting function
•Front glass: chamfered
•Safety glass
•Type of glazing: single glazing
•Version of glass top at rear side: glass
•The set includes:
–11 bars (W 20 x D 15 x 270 mm)
–4 screw feet
•Features:
–can be used in addition to the refrigerated pizza counter G-S7T2 (art. No.
200297)
–can be set up separately with feet attached
–cooling aggregate with cooling tray
•The set does not include: GN containers
4.2 Functions of the Appliance
In the cooling top unit GL3-2005, up to 10 GN 1/4 containers can be cooled and
suitable food products can be stored for a specific period of time.

Technical Data
200298 11 / 24
EN
4.3 List of Components of the Appliance
Fig. 1
1. Glass top
2. Side ventilation openings
3. Rear wall ventilation openings
4. Power cord
5. Front wall ventilation openings
6. Digital temperature controller
7. ON/OFF switch with integrated
power indicator light (green)
8. Housing
9. Foot (4 pcs)
10.Cooling tray for GN containers

Installation and operation
12 / 24 200298
EN
5 Installation and operation
5.1 Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
Unpacking / Positioning
•Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•Never place the appliance in humid or wet environment.
•Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no
problems;
–easily accessible;
–well ventilated.

Installation and operation
200298 13 / 24
EN
•Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•Nie należy umieszcz ać urządzeni a w gorącym o toczeniu ani w pobliżu materiał ów łatwopalnych.
•The appliance requir ess ufficient airflow for proper operation. Assure a minimum lateral cl earance of the appliance of 10 cm .
•DieÖ ffnungen am Gerät niemals abdec keno der blockieren.
•Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
•The electric socket sho uldb e easily accessibl es oit is possible to quickly disco nnect the power cord when necessary. The electric socket sho uldb e easily accessible so it is possible to quickly disco nnectt he power cord whenn ecessary. The electric socket sho uldb e easily accessible s oit is possible to quickly disco nnect the power cord when necessar y.
•Do not place the applianc ein h ote nvironment or in the vicinit yo ffl ammable materials .
•The appliance requir ess ufficient airflow for proper operation. Assure a minimum lateral cl earance of the appliance of 10 c m.
•Never cover nor bloc kve ntilation openings of t hea ppliance.
•Place the appliance so that sufficient air circulation is ensured. Do not obstruct
nor cover ventilation openings of the appliance.
•Leave a clearance of at least 20 cm from walls and other objects.
•At the front (operator side), leave sufficient space for operating personnel.
•Nie należy umieszcz ać urządzeni a w gorącym o toczeniu ani w pobliżu materiał ów łatwopaln ych.
•The appliance requir ess ufficient airflow for proper operation. Assure a minimum lateral cl earance of the appliance of 10 cm .
•DieÖ ffnungen am Gerät niemals abdec keno der blockieren.
•In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
•The electric socket sho uldb e easily accessible so it is possible to quickly disco nnectt he power cord whenn ecessary. The electric socket sho uldb e easily accessible s oit is possible to quickly disco nnect the power cord when necessar y. The electric socket sho uldb e easily accessible so it is possible to quickly disco nnectt he power cord whenn ecessary.
Glass Top Assembly
ATTENTION!
Risk of breaking glass!
Unpack the glass top very carefully.
NOTE!
We recommend to have the glass top assembled by 2 persons!
Glass top of cooling top is disassembled and packed independently. After
unpacking, it must be assembled.
1. First, check the delivered elements for completeness.
2. Assemble the glass top observing the following drawings. Follow indications
provided in this section.

Installation and operation
14 / 24 200298
EN
Glass top delivery scope
Name
Number
(pcs)
Name
Number
(pcs)
Rear glass pane
1
Glass corner connector
7
Left glass pane
1
Silicone glass fixing sleeves
14
Right glass pane
1
Knurled nut
14
Top glass pane
1
Knurled screw
14
Glass bracket with 1 pressure
screw each
6/6
Connection piece between
the cooling top and pizza
trolley
3
Countersunk screw for clamp
for glass elements
6
Screw for connecting piece
6

Installation and operation
200298 15 / 24
EN
1. Start the assembly with fixing clamps for glass elements (2 at the right, left and
rear) to the housing of the cooling top. Use the enclosed countersunk screws for
the clamps for glass elements (Fig. 1).
2. Insert the rear, left and right glass pane into the fitted clamps for glass elements
(Fig. 2, 4, 6). Ensure that the holes are in the upper parts of the panes.
3. Fix the panes in the clamps for glass elements using the clamping screws
(Fig. 3, 5, 7).
4. Then place the top glass pane on top of the left, right and rear glass panes
(Fig. 8). Ensure that all holes are one above the other.
5. Fix one silicone sleeve each in the glass openings to ensure that the nuts and
bolts do not come into contact with the glass pane.
6. Screw the panes together using 2 corner fasteners each at the corners of the
left and right glass panes and 3 corner fasteners each on the rear pane using
the knurled nuts and knurled screws provided (Fig. 9, 10).
7. To end with, check if all glass panes are correctly fitted.
NOTE!
The top glass pane must not be used as a shelf.
8. To place the cooling top on the rim of the refrigerated pizza counter, proceed as
follows:

Installation and operation
16 / 24 200298
EN
–place one of each of the supplied
connection elements on the left, right and
rear sides on the rim of the refrigerated
pizza counter,
–place the cooling top on the connection
elements,
–screw all the connection elements to the
cooling top using the screws provided.
Fig. 2
9. To install the cooling top on the worktop, screw the included feet (4 pcs) into the
designated threaded holes under the appliance.
Power supply connection
•Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•When the electrical connection is established, check that the supply voltage
during appliance operation does not deviate by ±10% from the nominal value
indicated on the rating plate.
•For your own safety, the appliance must be correctly earthed.
•The power cord used is type H05VV-F, 3 x 1.0 mm², length 1.65 m. If the power
cord is replaced, it must be replaced with a power cord of the same or better
properties.
•Replacement of a damaged power cord must be carried out by a qualified
technician.
•The plug must be easily accessible for quick disconnection of the appliance from
the power supply if the need arises.
•If the appliance was stored or transported vertically, leave it standing
horizontally for 12 hours before it is connected to electric power.
•Following an electric power outage, wait at least 3 minutes before reconnecting
the appliance to prevent a damage to the compressor.

Installation and operation
200298 17 / 24
EN
5.2 Operation
Indications for the User
•Fill the cooling top only when the display shows that the required temperature
has been reached.
•The prepared food products must be placed only in suitable GN containers
(section 'Technical Data').
•Do not place any warm dishes in the cooling top; cool them down to ambient
temperature first.
•Place GN containers filled with food products into the designated cooling tray. If
needed, use the enclosed bars as supports for GN containers.
•To avoid occurrence of unpleasant odours in the cooling top follow the
recommended storage periods of food products.
•If condensed water collects at the bottom of the cooling tray, wipe it with a soft,
dry cloth.
•After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
Appliance Preparation and Start-Up
1. Before use, clean the cooling top thoroughly, following indications in section 6
'Cleaning and Maintenance'.
2. Dry all cleaned elements and surfaces thoroughly.
3. Switch the appliance on (without food products). Follow indication in subsequent
sections of the instruction.
4. Plug the appliance into a suitable single socket.
5. Switch the appliance on by setting the switch at the front of the appliance to 'I'
(ON) position.
The green power indicator light in the ON/OFF switch lights up.
The digital display shows current temperature inside the appliance.
The LED indicator light blinks for 3 minutes during the delay between the
compressor stopping and restarting.

Installation and operation
18 / 24 200298
EN
6. Only when the appliance has reached
the desired temperature can suitable
food products be placed in GN 1/4
containers into the cooling tray of the
appliance.
7. Ensure that the cooling tray is always
filled with a set of GN containers, even
when the GN containers are unused or
empty.
Fig. 3
ATTENTION!
Uncovered areas of the cooling tray or empty GN containers significantly
reduce the performance of the appliance.
Control Elements and Displayed Messages
Key
Functions
Showing the set value, selection of parameters in the
programming mode or confirmation of the process
Manual start of defrosting
Selection of the parameter code in the programming
mode, increase of the displayed value
Selection of the parameter code in the programming
mode, decrease of the displayed value