Bartscher IK 35Basic User manual

IK 35Basic
105924
EN
Instruction manual
PL
Instrukcja obsługi
RU
Инструкция по эксплуатации
V1/0519

- 1 -
Read these instructions before using and keep them available at all
times!
Safety instructions
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
Electrical current
Too high a mains voltage or incorrect installation may cause electric shock.
The appliance may be connected only if data on the rating plate correspond with the
mains voltage.
To avoid short-circuit, the appliance should be kept dry.
If there are malfunctions during operation, disconnect the appliance from the power
supply.
Do not touch the appliance’s plug with wet hands.
Never take hold of the appliance if it has fallen into water. Immediately disconnect
the appliance from the power supply.
Any repairs or housing opening may be carried out by professionals and relevant
workshops only.
Do not transport the appliance, holding it by the power cord.
Do not allow the power cord to come into contact with heat sources or sharp edges.
Do not bend, pinch nor knot the power cord.
Always completely unwind the power cord.
Never place the appliance or other objects on the power cord.
Always take hold of the plug to disconnect the appliance from the power supply.
Flammable materials
Never subject the appliance to contact with high temperature sources, e.g.: oven,
furnace, open flame, heat generating devices, etc.
To avoid fire hazard, clean the appliance regularly.
Do not cover the appliance with, e.g., aluminium foil or cloths.
Use the appliance only with materials designated to this end and with correct
temperature settings. Materials, groceries and left-overs remaining in the appliance
may catch fire.
EN

- 2 -
Never use the appliance near flammable or inflammable materials, e.g.: petrol, spirit,
alcohol, etc. High temperature triggers evaporation of these materials, and, as a
result of contact with sources of ignition, an explosion may occur.
In case of fire, disconnect the appliance from the power supply before attempting
suitable fire-extinguishing actions. Never attempt to extinguish fire with water if the
appliance is connected to the power supply. Following extinction of fire, ensure
sufficient fresh air inflow.
WARNING! Fire hazard! Unconditionally avoid prolonged overheating of oil and fat!
Overheated oil of fat may catch fire quickly. In the event of fire, switch the appliance
off and suppress flames with a large pot lid, plate or damp dishwashing cloth.
WARNING! Explosion hazard! Do not heat up sealed containers, e.g. canned food,
on the heating area of the induction cooker. Resulting overpressure may cause
explosion (rupture) of a container or a can. Open canned food, put it in a pot partially
filled with water and place it on a heating area in order to heat it up.
CAUTION! Electromagnetic field!
Magnetized items, e.g. credit cards, data storage devices or calculators, may not be
placed in an immediate vicinity of the switched on appliance. Magnetic field might
damage them.
Do not open a bottom cover!
Make sure that cookware is always placed in the middle of the cooking area, so that
pot bottom covered the electromagnetic field to the maximum extent.
Scientific researches proved that induction cookers pose no threat. Nevertheless,
people with cardiac pacemaker should keep a distance of at least 60 cm from the
working appliance.
Hot surface!
During operation, the heating area is getting very hot.
Information: Induction cooker does not generate heat in the process of cooking.
Nevertheless, the temperature of cookware heats up the heating area!
WARNING! Risk of burns!
The surface remains hot after use. Do not touch hot surface!
Do not put metal kitchen utensils, lids, knifes nor any other metal objects on the
heating area. These objects might heat up after switching the appliance on.

- 3 -
Remember that wearable items, e.g. rings, watches etc., may heat up when they are
close to the cooker’s hob.
In order to avoid overheating, do not place any aluminium foil or metal plates on the
surface of the appliance. Do not open a bottom cover!
Operating personnel
This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
Children should be supervised to ensure that they are not playing with or switching
on the appliance.
Intended Use
Every use of the appliance for a different purpose and/or in a way that diverges from the
use described herein is not permitted and is assumed to be use against the intended
purpose.
This appliance is intended for use in households and similar places.
The induction cooker is solely intended for preparation and heating of dishes
using appropriate cookware.
Technical Data
Name
Induction cooker IK 35Basic
Art. no.:
105924
Material:
Housing: stainless steel; heating surface: glass
Time setting:
0–180 minutes, interval setting: 5 minutes
Temperature levels /
temperature range:
10 / 60 °C –240 °C
Interval setting: 20 °C
Power level / setting range:
13 / 500 W –3500 W
Interval setting: 200 W or 300 W
Power supply:
3.5 kW / 230 V / 50 Hz
Dimensions:
W 330 x D 420 x H 105 mm
Dimensions of glass hob:
W 280 x D 280 mm
Hob diameter:
Ø 230 mm
Weight:
5.2 kg
We reserve the right to make technical changes!

- 4 -
Version / Characteristics
Number of hobs: 1
Cookware detection
Overheating protection
Regulation of: power, temperature, time
Digital display
ON/OFF button
Indicator light: on/off
Control: electronic, touch
Appliance connection: ready to plug in
Installation
Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION! Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
If the appliance is covered with a protective film, remove it. Remove the film slowly,
so no glue residues are left. Remove any glue residues with the use of a suitable
solvent.
Be careful not to damage the rating plate and warning labels fixed on the appliance.
Never place the appliance in humid or wet environment.
Place the appliance in a way making the connections easily accessible, so that they
may be quickly disconnected if such a need arises.
The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant to
high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no problems;
–easily accessible;
–well ventilated.
Maintain sufficient clearance from table edges. The appliance might turn over and
fall down.
Keep a distance of at least 5 –10 cm from flammable walls and other objects.

- 5 -
Power supply connection
Verify if technical data of the appliance (see rating plate) correspond with the local
electric power grid specification.
Connect the appliance to a single, properly grounded mains socket with protective
contact. Do not connect the appliance to a multi-socket.
The power cord should be laid in a way preventing anyone from threading on it or
tripping against it.
Do not use the appliance with an external timer or remote control.
Suitable cookware
oIron cookware;
oEnameled iron cookware;
oSteel or enameled iron pots / pans;
oCast iron pots / pans;
oStainless steel 18/0 and aluminum
cookware, if they are marked as suitable
for induction cookers (pay attention to the
description of the cookware).
Due to the particular nature of the induction field,
the cookware must have a plane magnetic bottom
(a magnet must stick to it).
We recommend only pots/pans with the bottom
diameter between 15 cm and 26 cm for better
results.
Unsuitable cookware
oCookware with a convex bottom;
oAluminium, bronze or copper
cookware. The exception is
cookware clearly labeled as suitable
for induction cookers;
oPots / pans with a diameter less
than 15 cm;
oCookware with feet;
oCeramic cookware;
oGlass cookware.
>15 cm

- 6 -
Operation
Control Panel
①
Time setting button
②
Temperature setting button
③
Power setting button
④
selection buttons: time, temperature or output level may be reduced
⑤
Digital display
⑥
selection buttons: time, temperature or output level may be increased
⑦
ON/OFF button
⑧
On/off light
Operating Instructions
1. Before use, clean the appliance, observing instructions in section “Cleaning”.
2. Place an appropriate cookware with food in the middle of the hob.
3. Plug the appliance into a single grounded socket.
An audio signal will sound and the on/off indicator light will start blinking. The appliance
is in STANDBY mode now.
4. Press ON/OFF button , to switch the appliance on.
The on/off indicator light is lit continuously.
①
⑥
②
⑤
⑦
④
③
⑧

- 7 -
Power setting
Press the button, to switch to the power mode.
Factory set power value of 2,000 W will be displayed.
Press the or selection buttons to change, at any moment, a setting in the range of
500 W –3500 W in 200 W / 300 W increments. The digital display shows the
corresponding power.
Temperature setting
Press the temperature setting button, to go to the temperature mode. The factory set
temperature of 100°C will be shown in the digital display.
Press the or selection buttons to change, at any moment, the temperature
setting in the range of 60 °C –240 °C, and in 20 °C increments. Selected temperature
value will be shown in the digital display.
Time setting
After selecting the type of operation (power or temperature mode), press the button,
to access operation time settings. The digital display shows “0”.
Press the or selection buttons to set operation time in the range of up to 180
minutes. The set time is counted down in one-minute intervals and then the digital
display returns to the previous indications ( or ).
When the time elapses, the appliance switches off automatically. Only the electronics
cooling fan operates for ca. 1 minute, and then switches off.
In order to interrupt the operation, set the time with selection button to “0”.
NOTE!
During operation, the time setting may be changed, at any moment, using
the or buttons. Memory function of the appliance keeps the set output
and temperature levels unchanged.
Power or temperature settings may be set in the same way, without changing
the set time.
The appliance will then operate with the most recent settings.
When the process of cooking or keeping food warm is over, switch the appliance off
by pressing the ON/OFF button and pull the plug out of the socket.
The appliance switches off automatically if no setting is entered within 2 hours or
the timer is set to a value not exceeding 120 minutes.

- 8 -
CAUTION!
Never place an empty cookware on the hob.
Heating up an empty pot or frying pan activates the overheating protection
system; an audio signal will sound and the appliance turns off.
The digital display shows “E1”.
Remove a pot from the hob and leave the appliance for a few minutes to cool
off. After these operations the appliance may be turned on as usual.
Cleaning
WARNING!
Before cleaning, disconnect the appliance from the power supply.
Leave the appliance to cool down completely.
Do not immerse the appliance in water or other liquids during cleaning. Do not clean
the appliance with a pressurized water jet.
Protect the appliance from water penetration.
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp or
pointed implements may damage the appliance, and when in contact with live parts,
they may cause electric shock.
CAUTION! For cleaning, do not use any scouring agents containing solvents nor
corrosive cleaning agents. They may damage the surface.
1. Clean the appliance regularly.
2. Housing, hob and control panel should be cleaned with a soft, damp cloth and a
mild, non-scouring, cleaning agent.
3. Ventilation slots at the rear side of the appliance must always be free of dust and
dirt, or cleaned if necessary (e.g. using a brush or a vacuum cleaner).
4. After cleaning, dry and polish the surface with a soft and dry cloth.
Waste disposal
The electric devices are marked with this symbol. You must not
dispose of electric devices with household waste. When the
device may not be longer used each consumer is obliged to
dispose of the device at the dedicated local collection point,
separately from household waste.
Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com