Baumer LXG series User manual

Conformity / Safety
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
[e-mail] · Phone [phone] · Fax [phone]
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 07/19. v14 11162762
Conformity:
CE, RoHS
Safety Precautions
▪Protect the sensor from dirt and
moisture.
▪Never open the camera housing.
▪Avoid camera contamination by
foreign objects.
Environmental requirements:
Storage temp. -10 °C ... +70 °C
Operating temp. +5 °C ... +50 °C
Housing temp. max. +50 °C
Humidity 10 % ... 90 %
Non-condensing
Quick Start Guide
LXG cameras with VisualApplets (Gigabit Ethernet)
Download latest camera software:
www.baumer.com/vision/software
Download latest technical documentation:
www.baumer.com/cameras/docs
Product Specication
LXG cameras with VisualApplets (image preprocessing)
▪Single Gigabit Ethernet progressive scan CMOS camera
▪GigE VisionTM standard compliant
▪True partial scan function (ROI) for increased frame rates
▪High Dynamic Range (HDR) image acquisition
▪External synchronization via industrial compliant process interface (trigger / flash)
▪Global shutter architecture for minimized motion blur
▪Power over Ethernet (PoE) support
▪Standard RJ45 connectors
▪Excellent image quality
▪Camera parameter programmable in real-time
▪VisualApplets based image processing
Notice
Further technical details are available in the respective data sheet.
Dimensions Camera with C-Mount
60
60
47
47
Pixel 0,0
8 x M3 x 6
1"-32 UN
18,055 ±0,025
26
8
52,35
54,25
44,75
8
26
8 x M3 x 6
8
26
30
6
19,7
20
17,5
48,8
14,7
14,7
35,8
Dimensions Camera with M58-Mount
47
60
47
60
M58 x 0,75
Pixel 0,0
4 x M3 x 6
44,75
52,35
54,25
35,8
8
26
8 x M3 x 6
8
26
12 ±0,25
8
26
14,7
19,7
20
17,5
48,8
14,7
Lens Adapter for Cameras with M58-Mount
▪Adapter M58 / F-mount (Art. No.: 11117852)
▪Adapter M58 / M42x1-mount (26.8mm) (Art. No.: 11127232)
▪Adapter M58 / M42x1-mount (45.5 mm) (Art. No.: 11137781)
Notice
suitable for Zeiss (e.g. Distagon T* 2/25 Z-M42-I, Planar T* 1.4/50 Z-M42-I,
Makro-Planar T* 2/50 Z-M42-I) and KOWA M42 lenses (e.g. LM28LF P-mount,
LM35LF P-mount)
▪Adapter M58 / C-mount (Art. No: 11115198)
CE
We declare, under our sole responsibility, that the previ-
ously described Baumer LXG cameras with VisualApplets
conform with the directives of the CE.
RoHS
All LXG cameras with VisualApplets comply with the
recommendation of the European Union concerning RoHS
Rules.

LED Signaling
LED
Signal Meaning
Camera
LED
green on Power on, link good
green blinking Power on, no link
red on Error
red blinking Warning (update in progress, don’t switch off)
yellow Readout active
General Description
123
4
5
No. Description No. Description
1
LXG-20/40
C-mount only.
LXG-120/200
lens mount (M58), adapter for
other lens mounts available
4Signaling-LED
2Data Port 1 (PoE) 5Digital-IO (RS485)
3Power Supply / Digital-IO
Heat Transmission
Caution
Provide adequate dissipation of heat, to ensure that the temperature
does not exceed +50 °C (+122 °F).
The surface of the camera may be hot during operation and immediately
after use. Be careful when handling the camera and avoid contact over a
longer period.
As there are numerous possibilities for installation, Baumer do not speci-
y a specic method for proper heat dissipation, but suggest the following
principles:
▪operate the cameras only in mounted condition
▪mounting in combination with forced convection may provide proper
heat dissipation
TT
Measure Point Maximal Temperature
T +50 °C (122 °F)
Data Interface
Notice
The Data port supports Power over Ethernet (36 VDC .. 57 VDC).
Data / Control
1000 Base-T
wire colors of the connecting cable
LED2
LED1
8
1
1green/white MX1+
2green MX1-
3orange/white MX2+
4blue MX3+
5blue/white MX3-
6orange MX2-
7brown/white MX4+
8brown MX4-
Signal Meaning
RJ45 LEDs
green on Link on
green blinking Link activity
Amber on GigE speed
Amber blinking 100 MB speed
Power Supply and Process Interfaces
Power and Process Interface #1
SACC-DSI-M8MS-8CON-M8-L180 SH
Power and Process Interface #2 (RS485)
SACC-DSI-M8FS-8CON-M10-L180 SH
M8 / 8 pins wire colors of the connecting cable
8
5
7
3
1
42
6
8
5
7
3
1
42
6
1white OUT 3 (line 3) 1white In2_RS485+ (line4)
2brown Power VCC+ 2brown In2_RS485- (line4)
3green IN 1 (line 0) 3green In2_RS485+ (line5)
4yellow IO GND 4yellow In2_RS485- (line5)
5grey IO Power VCC 5grey OUT3_In2_RS485+ (line6)
6pink OUT 1 (line 1) 6pink OUT3_In2_RS485- (line6)
7blue Power GND 7blue external Power GND
8red OUT 2 (line 2) 8red external Power 5 V/200 mA
Power Supply
Power VCC 12 VDC ... 24 VDC
Installation
open wire
4
Installation sample without PoE
1 - network interface card
2 - network cable
3 - Process interface- / Power cable
4 - Process interface cable (RS485)
open wire
4
open wire
4
5
Installation sample with PoE via NIC
1 - PoE network interface card (NIC)
2 - network cable (PoE)
3 - Process interface cable
4 - Process interface cable (RS485)
Installation sample with PoE via Injector
1 - network interface card (NIC)
2 - Injector
3 - network cable (with PoE)
4 - Process interface cable
5 - Process interface cable (RS485)