Baumr-ag Blwclsbmrahb2 User manual

Cordless 20V Blower

User Manual

[Revision 1.0 May 2017]

READ THIS MANUAL CAREFULLY BEFORE USE –FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY

DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by

this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.

Cordless 20V Blower

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or

equipment damage may occur.

It is important that you read and

understand the instruction manual before

use and keep the manual in a safe place

for future reference. Safety information

presented here is generic in nature –some

advice may not be applicable to every

piece of equipment.

All safety precautions must be observed to

reduce the risk of personal injury when

operating the equipment.

The term “equipment" refers to your

product, be it electrical mains, battery or

petrol engine powered.

IMPORTANT –Handle the equipment

safely and carefully.

BEFORE USE - If you are not familiar with

the safe operation/handling of this

equipment, or are in any way unsure of any

aspect of suitability or correct use it for

your application, you should complete

training conducted by a person or

organization qualified in safe use and

operation of this equipment, including

fuel/electrical handling and safety.

WARNINGS

•Read all safety warnings and all

instructions. Failure to follow warnings

and instructions may result in electric

shock, fire and/or serious injury.

•Never run a petrol engine in confined

areas.

•Do not operate the equipment in

flammable or explosive environments,

such as in the presence of flammable

liquids, gases or dust. Engine and

equipment may create sparks or heat

that may ignite vapours, dust etc

•Keep clear of moving parts.

•This equipment may be a potential

source of electric shock if misused.

•Do not operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

•Do not allow others to use the

equipment unless they have read this

manual and are adequately trained.

•When using the equipment, basic

safety precautions detailed here must

always be followed to reduce the risk

of fire, electric shock, personal injury

and material damage.

•When wiring electrically powered

equipment, follow all electrical and

safety codes.

•Ensure all power sources conform to

equipment voltage requirements and

are disconnected before connecting

equipment.

General Work Area Safety

Work areas should be clean and well it.

Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

Personal Safety

Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

Prevent unintentional starting of the

equipment - ensure equipment and power

source switches are in the OFF position

before connecting or moving the

equipment. Do not carry equipment with

hands/fingers touching any controls.

Remove any tools or other items that are

not a part of the equipment from it before

starting or switching on.

Stay alert and use common sense when

operating equipment. Do not overreach.

Keep proper footing and balance at all

times. Do not use equipment when tired or

under the influence of drugs, alcohol or

medication. This equipment is not intended

for use by persons with reduced physical,

sensory or mental capabilities.

You must wear appropriate protective

equipment when operating, servicing, or

when in the operating area of the

equipment to help protect from serious

injury, including eye injury, inhalation of

toxic fumes, burns, and hearing loss.

Always wear eye protection. Protective

equipment such as respirators, non-skid

safety shoes, hard hat, hearing protection

etc should be used for appropriate

conditions. Other people nearby should

also wear appropriate personal protective

equipment. Do not wear loose clothing or

jewellery, which can be caught in moving

parts. Keep hair and clothing away from

the equipment.

If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce

dust-related hazards.

General Product Use and Care

Do not force the equipment. Use the

correct equipment for your application. The

correct equipment will perform better and

be safer within its design parameters. Do

not use the equipment if the ON/OFF

switch malfunctions –any equipment that

cannot be controlled with the ON/OFF

switch is dangerous and must be repaired.

Use the equipment and accessories etc. in

accordance with these instructions, taking

into account working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorized service centre or technician

before use.

Always keep the equipment and

accessories (cutting tools, nozzles, bits

etc) properly maintained. Keep the

equipment, controls and handles dry and

free from dirt, oil and grease.

Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place the equipment in

places where there are flammable

materials, combustible gases or

combustible liquids etc.

The equipment is not weatherproof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations

that are damp or very humid.

Blower Use and Care

•For domestic use only.

•Always wear a face shield when

operating the machine.

•Maintain a distance of at least 20m

(60') between the operator and any

bystanders, animals etc.

•Never blow debris in the direction of

bystanders.

•Always use the complete and correct

blow attachments.

•If rubbish to be blown is stuck

together, it may be necessary to

break it up before using the machine

on it.

•Do not operate the machine near

open windows.

•Be aware of machine noise and be

considerate of others –operate the

machine during reasonable times of

day.

•This product is designed for hard

surface use. Do not use on grass or

to move wet or heavy debris.

•Do not blow hard or sharp materials,

such as glass, stones, metal objects

etc.

Cordless 20V Blower

Battery and Charging Safety

•Use only with the batteries and

battery charger supplied by the

manufacturer.

•Do not charge batteries in

temperatures below 4°C (40°F) or

above 40°C (104°F).

•Allow the battery pack to cool before

charging.

•Ensure the power switch is in the OFF

position before inserting the battery

pack.

•Explosion hazard –Do not attempt

to destroy or disassemble the battery

pack or remove any of its

components.

•Explosion hazard - Do not touch the

battery terminals with metal objects

and/or body parts as short-circuit

and/or personal injury may result.

•Explosion hazard –Protect the

battery against heat; for example,

direct sunlight and fire.

•Poison hazard –Under severe

conditions, liquid may be ejected from

the battery –avoid contact. If contact

occurs, flush with water. If liquid

contacts eyes, flush with clean water

for at least 10 minutes, then seek

immediate medical attention. Liquid

ejected from the battery may cause

irritation or burns.

•Electrocution / electric shock

hazard - Do not operate the battery

charger if it has a damaged cord or

plug.

•Batteries must be disposed of in

accordance with local regulations.

General Service Information

•Have the equipment serviced or

repaired at authorized service centres

by qualified personnel only.

•Replacement parts must be original

equipment manufacturer (OEM) to

help ensure that equipment safety is

maintained.

•Do not attempt any maintenance or

repair work not described in this

instruction manual.

•After use, the equipment and

components may still be hot –allow

the equipment to cool and disconnect

spark plugs and/or electrical power

sources and/or batteries from it before

making adjustments, changing

accessories or performing repair or

maintenance.

•Do not make adjustments while the

equipment is running.

•Perform all service related activities

under suitable conditions, such as a

workshop etc.

•Replace any worn, damaged or

missing warning labels immediately.

•Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

Cordless 20V Blower

Table of Contents

Safety.............................................................................................................................................2

Parts Identification........................................................................................................................ 5

Assembly.......................................................................................................................................6

Operation....................................................................................................................................... 7

Charging the Battery ....................................................................................................................................7

Troubleshooting............................................................................................................................8

Specifications ...............................................................................................................................8

Cordless 20V Blower

Parts Identification

No.

Name

No.

Name

1

Blower Unit

4

Main Blower Tube

2

Transformer

5

Blower Nozzle

3

Battery Charger

6

Battery Pack

4

5

3

6

2

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Cordless 20V Blower

Assembly

1. Slide the main blower tube (2) over the blower unit outlet (1) until it "clicks" into place. To disassemble

the tube from the blower unit, press and hold the release button (A) and slide the tube off.

2. Slide the blower nozzle (3) on to the end of the main blower tube until it "clicks" into place. This

connection is not designed to be disassembled.

3. Slide the battery pack (4) into the back of the blower unit until it "clicks" into place. Ensure that the

locating rails (B) on the top of the battery are aligned with the slots (C) in the blower unit. To remove the

battery pack, press the battery release latch (D) down until the battery pack "pops" out from the blower

unit, then slide it out.

2

1

A

3

4

C

B

D

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Cordless 20V Blower

Operation

Always wear a face shield when operating the machine. • Maintain a distance of at least

20m (60') between the operator and any bystanders, animals etc. • Never blow debris in the

direction of bystanders. • Ensure that battery is fully charged before using the machine.

1. Hold the machine firmly by the handle, with the nozzle pointing away, then switch the machine ON. The

power switch (1) has 3 positions –OFF (A), ON: LOW SPEED (B) and ON: HIGH SPEED (C).

2. When finished, switch the machine OFF.

•Stand at a distance away from debris that will easily allow you to control its direction as it is blown.

•Blow in an arc motion and keep the nozzle approximately 150 to 200mm above the ground during use.

•Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces.

Charging the Battery

Do not touch the battery terminals with metal objects and/or body parts as short-circuit

and/or personal injury may result. • Do not operate the battery charger if it has a damaged

cord or plug. • Use only with the batteries and battery charger supplied by the manufacturer. • Do not charge

batteries in temperatures below 4°C (40°F) or above 40°C (104°F). • Allow the battery pack to cool before

charging. • The battery pack has built-in protection against deep discharge. • Do not leave the battery pack

connected to the charger for extended periods. • The battery charger may generate some heat and emit a

small amount of noise during use –this is normal.

1. Ensure the machine is switched OFF.

2. Remove the battery pack from the machine.

3. Slide the battery "charging dock" (2) on to the battery (1). Ensure that the locating rails on the top of the

battery are aligned with the slots in the charging dock and that both parts are fully engaged.

4. Connect that battery charger (3) cable to the charging dock, and plug the battery charger into a 240VAC

mains electrical supply. When charging, the indicator lamp (A) on the battery charger will be red. When

the battery is charged (approximately 4 hours), the indicator lamp will be green.

5. Disconnect the battery charger from the electrical supply and remove the charging dock from the battery

pack.

A

B

C

1

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Cordless 20V Blower

Troubleshooting

Problem

Possible Cause

Corrective Action

Machine does not run

Battery not connected

Connect battery pack

Battery requires charge

Charge battery

Battery no longer serviceable

Replace battery pack

Blower unit fault

Have the machine inspected and repaired at

an authorised service centre

Machine runs, but has low

power

Battery requires charge

Charge battery

Battery no longer serviceable

Replace battery pack

Specifications

Battery Type

1500mAh Li-Ion

Battery Charger

240VAC / 50Hz Input / 21VDC 300mA

1

2

3

A

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Cordless 20V Blower

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of serious

injury or death, refer to the information below. For more information, see

www.datastreamserver.com/safety

Consult all documentation, packaging and

product labelling before use. Note that

some products feature documentation

available online. It is recommended to print

and retain the documentation.

Before each use, check the product for

loose/broken/damaged/missing parts, wear

or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts, wear

or leaks.

Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on average

residential use by persons of average size

and strength, and on a property of average

metropolitan size. Use beyond these

recommendations may require more

frequent inspections/servicing.

Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.

The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or replacement

of parts, or the product itself. If the possibility of such failure

and the associated time it may take to rectify could in any

way inconvenience the user, business or employee, or

financially affect the user, business or employee, then the

product is not suitable for your requirements. This product is

not intended for use where incorrect operation or a failure of

any kind, including but not limited to, a condition requiring

product return, replacement, parts replacement or service

by a technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.

If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if required.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Baumr-AG BLWCLSBMRAHB2 User manual

Popular Blower manuals by other brands