Baxton Studio NL2020810-NS User manual

1 x 1
drawer left
side panel
2 x 1
drawer back
panel
3 x 1
drawer right
side panel
4 x 1
drawer bottom
panel
5 x 1
drawer front
panel
6 x 1
drawer handle
7 x 1
left side panel
8x 1
support bar
9 x 1
right side panel
10 x 1
top panel
11 x 1
back panel
12 x 1
bottom panel
13 x 4
apron bar
14 x 4
apron block
15 x 4
wooden leg
B x 10 C x 10 D x 6 E x 10
F x 16 G x 8 H x 8 I x 8
L x 1 M x 1
A x 10
cam lock pin
ASSEMBLY INSTRUCTION
PART LIST
HARDWARE LIST
cam lock wooden dowel screw
screwscrew bolt
right drawer slider
washer
left drawer sliderright drawer rail
D4x30mm D4x10mm
D4x25mm D4x40mm D6x40mm
screw
K x 1
left drawer rail
J x 1

01
(1) (2) (3) (4) (5)
(1):Use screw (D) to fix drawer left side panel (1) and drawer right side panel (3) with drawer back panel (2).
(2):Put in the bottom panel (4).
(3):Lock
cam lock pin ( A) on drawer left side panel ( 1), and drawer right side panel ( 3)with 4 cam lock ( B).
(4):Use 2 screws (E) to lock door handle (6) on
drawer panel ( 5).
(5):Lock
left drawer slider ( L) / right drawer slider ( M) on drawer left side panel ( 1) and drawer right side panel ( 3) with 4 screw ( E).
02
Lock left drawer rail ( J) to left side panel ( 7)
with 2
screw (E) and right drawer rail ( K) to
right side panel ( 9) with 2 screw (E).
Use cam lock pin (A)/cam lock (B)/wooden dowel
(C) to lock support bar (8) with left and right side
panel (7,9).
The steps are consistent with the "step 03".
03 04

05 07 07
Put in the back panel (11).
Lock "step 07" on
bottom
back (
12) with 8 screw ( G).
On the basis of "step 08", lock
wooden leg ( 15)
on "step 08" with 2 bolt (H) and 2
washer ( I),
repeat 4 times.
Lock
bottom panel ( 12) on left side panel
(
7), right side panel ( 9) with 4 screw ( D)
and 4
wooden dowel ( C).
Lock
apron block ( 14) on both apron bar
(
13) with 4 screw (F), repeat 4 times.
Put it in the drawer.
Finish assembly.
08 09 10