Famisky Crank standing desk User manual

Crank standing desk
FAMISKY Desktops 40”and larger

Caution
Keep children and pets away from the electric height-adjustable desk during the
operation. Unplug the power cord during a thunderstorm or if you do not intend
to use the desk for a long time.
Make sure desktop not touching the wall.
Ensure no obstacles in the desk’s path and no object above and 20” under the desk.
Working environment temperature 0-40℃, keep products away from corrosive gas,
liquid and dusty objects.
It is strictly forbidden to disassemble the products privately to avoid that the failure of
the products or the damage to the human body caused by electronic products, etc.
Although the product with anti-collision function, in order to avoid any pinching,
please ensures that hands or other parts of your body are in a safe position during
the operation. Anti-collision is not enabled during all resets.
Please read the following instructions carefully before start using the high-
adjustable desk. The company does not bear any warranty or liability for damage
and human injury caused by any abnormal operation.
It is necessary to reset manually after the initial installation or power off.
1

Parts List
2
Tools Needed (Not Included)
Electric Drill Phillips Screwdriver
A-Leg (L) ×1 B-Leg (R) ×1 C-Foot × 2 D-Transmission rod × 1
E-Crossbar Assembly×1 F-Desk top Brackets ×2 G-Handle × 1 H-Flat footrest × 4
I-Optional caster ×4 J-Hexagonal Wrench 5mm K-Simple wrench 10&14 × 1 L-Bracket × 1
M-Hook ×2 N-ST 4.8×12 ×22 O-M6×16 ×8 P-M6×12 ×4
Q-M6×12 ×8 R-M6 Nut ×8
X-Table board 1/2
S-Pin ×5 T-Hexagonal Wrench 2mm U-Handle clasp
×1
V-Handle holder ×1 W-Handle bracket ×1
①
②
Video installation guide: https://youtu.be/oRy5dVDVseE
Note: please watch the installation guide before assembly.

3
Assembly
Checklist
Step 1
Checklist
Step 3
Step 2Checklist
Checklist
Leg (L) ×1
Leg (R) ×1
Crossbar Assembly ×1
M6×12 ×8 M6 Nut ×8
Hexagonal Wrench 5mm
B
E
A
A
B
E
QR
J
Install feet or casters.
Optional caster
Foot × 2
Flat footrest × 4
M6×16 ×8
Simple wrench 10&14 ×1
Optional caster ×4
H
C
IK
Hexagonal Wrench 5mm
C
H
O
K
I
Install Desk top Brackets.
Desk top Brackets
M6×12 ×4
Hexagonal Wrench 5mm
F
P
F
P
J
J
OJ
×2
J
Q
R
K
Simple wrench 10&14 ×1
K
J
Video Installation Guide: https://youtu.be/plRvCBjfhxo
Please make sure you have viewed this installation video before assembly.

Assembly
Step 6
4
Step 4
Transmission rod
Table board 1/2
Pin ×5
Step 7
D
S
L
X
2.Load the main
leg as shown
3.Fixed transmission rod
1.Load the leg as shown
until the limit
D
S
Step 5
Install the transmission rod to
the limit position
①
②
①
②
X
He xagonal Wrench 2mm
T
T
G
Insert the handle and turn clockwise.
If the legs rise synchronously, remove
the handle and start for next step.
If the legs are out of sync, go back to step 4.
Handle × 1
G
First make sure the legs are at the
same height and the distance between
the legs is the same as the distance
between the crossbar；
Video Installation Guide: https://youtu.be/7QQ-PyAB07M
Please make sure you have viewed this installation video before assembly.

Assembly
5
9Checklist
G
Handle ×1
G
8Checklist
W
M
N
Handle bracket ×1
Hook ×2
ST4.8*12 ×20
N
L
Use ST4.8*12 tapping screws to secure the graphic parts to the table.
Install into the card slot
M
leg L leg R
Handle holder ×1
V
V
W
Handle clasp ×1
U
U
①
②
He xagonal Wrench 2mm
T
T

Why choose FAMISKY?
Many ergonomic office solutions come at high cost. Our mission is to use innovation,
creativity, and efficiency to produce a more affordable solution that doesn't sacrifice
quality and is easily accessible to the millions of home and office workers globally.
WARRANTY SERVICE
To provide the best service to you, don't forget to register your FAMISKY product to
confirm your warranty.
It only takes afew simple steps and then you can access a wide range of services such as
technical support, new product alert, promotions, and warranty service from FAMISKY.
Send your name and order ID to [email protected]
For more FAMISKY products, check out our website at: www.famisky-us.com