Mocka Parker Desk User manual

Parker Desk
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from
those supplied.
A
Hardware Supplied
Wall Strap
bolt &
locking nut
x24
F
14mm screw
x2
G H
50mm screw
x8
F
14mm screw
x16
B
50mm screw
x8
C
30mm screw
x12
D
handle
x2
I
25mm screw
x2
J
wall plug
x2
K
wall strap
x2
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
rails
x4
E1 E2
E3
E4
dowel
x16

12
Parker Desk
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 8 x dowels (H) into panel [2]. Attach panels [3], [4], [5] and [6] to
panel [2] and secure with 8 x bolts (A) and 8 x locking nuts (A). Tighten
with a screwdriver.
Attach 2 x rails (E3) to panels [4] and [5] and secure with 4 x screws
(F). Tighten with a screwdriver.
3
56
4
2
A
H
E 3
E 3
5
4
F
F
F
F
A

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x rails (E1) to panels [3] and [6] and secure with 4 x screws
(F). Tighten with a screwdriver.
Insert 8 x dowels (H) into panels [3], [4], [5] and [6]. Slide panel [7] into
position as shown. Attach panel [1] to panels [3], [4], [5] and [6] and
secure with 8 x bolts (A) and 8 x locking nuts (A). Tighten with a
screwdriver.
Parker Desk
4
A
E 1
E 1
3
6
F
F
F
F
1
3
7
5
6
4
A
H

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach steel frame [14] to steel frame [15] and secure with 8 x
screws (B). Tighten with a screwdriver.
Attach base to assembled frame as shown and secure with 12 x
screws (C). Tighten with a screwdriver.
Parker Desk
6
B
B
2
C
14
14
15
15

7x 2
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Parker Desk
8x 2
A
Attach 2 x handles (D) to panels [8] and [9] as shown. Attach panels
[10] and [11] to panel [12] and secure with 4 x screws (G). Slide
panel [13] into position as shown. Attach panels [8] and [9] to as
sembled frame and secure with 8 x bolts (A) and 8 x locking nuts
(A). Tighten with a screwdriver.
A
G
G
A
11
10
12
13
89
D
89
Attach 2 x rails (E2) to panel [10] and secure with 4 x screws (F).
Tighten with a screwdriver.
F
F
E2
10

9x 2
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slide drawers into position as shown, ensuring alignment with rails.
Parker Desk
10
Attach 2 x rails (E4) to panel [11] and secure with 4 x screws (F).
Tighten with a screwdriver.
F
E4
11
8
9
F

11
7
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the 2 x safety strap (K).
Fasten to the wall using 2 x wall anchors (J) and 2 x screws (I). Ensure
unit is balanced and steady before use.
You’re done, enjoy!
Parker Desk
12
K
F
K
I
J