Walker Edison WQ44CCR User manual

ITEM # : WQ44CCR
Assembly Instructions
  
 
Revised 01/2018
Copyright © 2010, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Screw cam bolts (B) into stand top (1).
Insert dowels (A) into shelf (9), panels (3,4) and back panel (11). Screw cam bolts (B) into
panels (3,4).

Screw cam bolts (B) into panel (2). Insert dowels (A) into panel (2) and slat (19).
Attach slat (19) to panel (2) using cam bolts and dowels as guides. Insert cam locks (C) into
slat (19) and tighten with a screwdriver.

Insert dowels (A) into legs (5,6,7,8). Screw cam bolts (B) into legs (5,6,7,8).
Insert dowels (A) into slat (10). Attach slat (12) to slat (10) using screws (E). Attach door
stopper (F) to slat (12) using screws (G).

Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into
panel (3) and tighten with a screwdriver.
Attach legs (7,8) to panel (4) using cam bolts and dowels as guides. Insert cam locks (C) into
panel (4) and tighten with a screwdriver.

Attach panel (2) and shelf (9) to panel (3) using cam bolts and dowels as guides. Insert cam
locks (C) into panel (2) and shelf (9) and tighten with a screwdriver. Two cam locks (C) will
be inserted into panel (2) and into shelf (9).
Attach slat (10) to leg (5) using cam bolt and dowel as guides. Insert cam lock (C) into slat (10)
and tighten with a screwdriver.

Insert cam locks (C) into panel (2), shelf (9) and slat (10). Attach panel (4) to panel (2), shelf (9)
and slat (10) using cam bolts and dowels as guides. Tighten cam locks (C) with a screwdriver.
Attach back panels (11,15,16,17,18) to the frame assembly using bolts (H). Tighten bolts (H)
with wrench (R). Bolts (H) will screw through back panels (11,15,16,17,18) and into either
panel (2) or shelf (9).

Insert cam locks (C,D) into the frame assembly. Attach stand top (1) to the frame assembly
using cam bolts and dowels as guides. Tighten cam locks (C,D) with a screwdriver.
Cover all visible cam locks with stickers (T) as desired.

Cover all visible bolts with stickers (T) as desired.
Insert plastic pivots (Q) into panel (2) and slat (10).

Attach door hinge (P) to door (13) using screws (J). Attach door hinge (N) to door (14) using
screws (J).
Attach handles (K) to doors (13,14) using
handle bolts (L). Attach door stopper plates
(M) to doors (13,14) using screws (J).
Attach handles (U) to doors (13,14) using
handle bolts (V). Attach door stopper plates
(M) to doors (13,14) using screws (J).

Insert door hinge (N) into bottom left plastic pivot (Q). Slide door (13) into place, inserting flange of door hinge (P)
into top left plastic pivot (Q). Secure door hinge (N) to door (13) using screws (J). Insert door hinge (P) into bottom
right plastic pivot (Q). Slide door (14) into place, inserting flange of door hinge (N) into top right plastic pivot (Q).
Secure door hinge (P) to door (14) using screws (J).