BBPGlobal Linksys PAP2-NA Quick guide

Linksys PAP2-NA Phone Adapter
Configuration Instructions
Version 1.0
© Copyright 2006 BBPGlobal. All rights reserved.

- 1 -
Configuration for Linksys Phone Adapter PAP2-NA
A. Physical connection
1. Connect the Phone Adapter as illustrated
Connect a touch-tone phone to the
phone adapter
Connect the internet source (eg.
Router or ADSL modem) into the
Ethernet port of the phone adapter
Connect the power source

- 2 -
B. Enter the Configuration Menu
1. Look for IP Address of the phone adapter
Pick up the phone and type * * * * (star key x 4)
Type 110#
The IP address would be read out
2. Type the IP address onto the address bar of Internet Explorer
3. Click “Admin Login” as illustrated

- 3 -
C. System Settings
1. Click on “System” Tab and enter the information as illustrated. Click “Save Settings”
when done.
D. SIP Settings
1. Click on “SIP” Tab and enter the information as illustrated. Click “Save Settings”
when done.

- 4 -
E. Configure Line 1 or 2
1. Click on “Line 1” Tab and enter the information as illustrated. Click “Save Settings”
when done.
NB: Port number of sip2.bbpglobal.com is 5060.