BCM Advanced Research ARC-1209 User manual

Part No. E2017A290A5R
ARC-1209/1509
12.1"/15" Intel® Atom™ SoC Processor E3845 /Intel®
Celeron® J1900 Fanless Rugged Touch Panel PC with IET
Expansion
Quick Reference Guide
4th Ed –22 June 2018
Copyright Notice
Copyright 2018 ALL RIGHTS RESERVED.

ARC-1209/1509
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Customer Services
Each product is built to the most exacting specifications to ensure reliable
performance in the harsh and demanding conditions typical of industrial
environments. Whether your new device is destined for the laboratory or the factory floor,
you can be assured that your product will provide the reliability and ease of operation.
Your satisfaction is our primary concern. Here is a guide to our customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s
manual first.
2 ARC-1209/1509 Quick Reference Guide

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................6
1.1 Safety Precautions....................................................................................................6
1.2 Packing List...............................................................................................................6
1.3 System Specifications...............................................................................................7
1.4 System Overview....................................................................................................10
1.4.1 I/O View................................................................................................................................. 10
1.5 System Dimensions ................................................................................................11
1.5.1 ARC-1209 (A Model) ............................................................................................................. 11
1.5.2 ARC-1209 (B Model) ............................................................................................................. 12
1.5.3 ARC-1509 (A Model) ............................................................................................................. 13
1.5.4 ARC-1509 (B Model) ............................................................................................................. 14
2. Hardware Configuration .......................................................................................15
2.1 ARC-1209/1509 connector mapping.......................................................................16
2.1.1 Serial port 1 connector (COM1)............................................................................................. 16
2.1.2 Serial port 2 connector (COM2)............................................................................................. 16
2.2 Installing Hard Disk & Memory................................................................................17
2.3 Installing ARC-BYT DB ...........................................................................................19
2.4 ARC-BYT Overviews...............................................................................................21
2.5 ARC-BYT Jumper and Connector list......................................................................22
2.6 ARC-BYT Jumpers & Connectors settings..............................................................23
2.6.1 Clear CMOS (JCMOS1) ........................................................................................................ 23
2.6.2 Serial port 1/2 pin9 signal select (JRI1/JRI2) ........................................................................ 23
2.6.3 LCD backlight brightness adjustment (JVR1)........................................................................ 24
2.6.4 AT/ATX Input power select (JAT1)........................................................................................ 24
2.6.5 Serial port 1 in RS-422/485 mode (JP1) ............................................................................... 25
2.6.6 LCD Inverter connector (JBKL1) ........................................................................................... 25
2.6.7 On-board header for USB2.0 (H_JUSB3) ............................................................................. 26
2.6.8 SATA Power connector (JSATA2P1).................................................................................... 26
2.6.9 LVDS connector (JLVDS1).................................................................................................... 27
2.6.10 Battery connector (BT1) ........................................................................................................ 28
2.6.20 Power connector (PWR1)...................................................................................................... 33
2.7 ARC-BYT DB-A/B/C/D/E/F/G/H/K Overviews .........................................................34
2.7.1 ARC-BYT DB-A ..................................................................................................................... 34
2.7.2 ARC-BYT DB-B ..................................................................................................................... 34

ARC-1209/1509
4 ARC-1209/1509 Quick Reference Guide
2.7.3 ARC-BYT DB-C..................................................................................................................... 34
2.7.4 ARC-BYT DB-D..................................................................................................................... 35
2.7.5 ARC-BYT DB-E ..................................................................................................................... 35
2.7.6 ARC-BYT DB-F...................................................................................................................... 35
2.7.7 ARC-BYT DB-G..................................................................................................................... 36
2.7.8 ARC-BYT DB-H..................................................................................................................... 36
2.7.9 ARC-BYT DB-K ..................................................................................................................... 36
2.8 ARC-BYT DB-A/B/C/D/E/F/G/H/K Connector list....................................................37
2.8.1 ARC-BYT DB-A ..................................................................................................................... 37
2.8.2 ARC-BYT DB-B ..................................................................................................................... 37
2.8.3 ARC-BYT DB-C..................................................................................................................... 37
2.8.4 ARC-BYT DB-D..................................................................................................................... 37
2.8.5 ARC-BYT DB-E ..................................................................................................................... 37
2.8.6 ARC-BYT DB-F...................................................................................................................... 38
2.8.7 ARC-BYT DB-G..................................................................................................................... 38
2.8.8 ARC-BYT DB-H..................................................................................................................... 38
2.8.9 ARC-BYT DB-K ..................................................................................................................... 38
2.9 ARC-BYT DB-D Connectors settings......................................................................40
2.9.1 Serial Port 1 connector (D_COM1)........................................................................................ 40
2.9.2 Serial Port 2 connector (D_COM2)........................................................................................ 40
2.10ARC-BYT DB-E Jumpers & Connectors settings....................................................41
2.10.1 CAN2.0 Switch (E_JCAN20) ................................................................................................. 41
2.10.2 For user update FW (E_JBOOT0)......................................................................................... 41
2.10.3 For user update FW (E_JIAP1) ............................................................................................. 42
2.11ARC-BYT DB-F Connectors settings ......................................................................44
2.12ARC-BYT DB-H Jumpers settings...........................................................................45
2.12.1 USB Power selector (H_USB_PWR_SEL1).......................................................................... 45
2.13ARC-BYT DB-G Connectors settings......................................................................45
2.13.1 Serial Port 1 connector (G_COM1) ....................................................................................... 45
2.13.2 Serial Port 2 connector (G_COM2) ....................................................................................... 46
2.13.3 Serial Port 3 connector (G_COM3) ....................................................................................... 46
2.14ARC-BYT DB-H Connectors settings......................................................................47
2.14.1 Serial Port 1 connector (H_COM1)........................................................................................ 47
2.14.2 Serial Port 2 connector (H_COM2)........................................................................................ 47
2.15ARC-BYT DB-K Connectors settings......................................................................48
2.15.1 Serial Port 1 connector (I_COM1)......................................................................................... 48
2.15.2 Serial Port 2 connector (I_COM2)......................................................................................... 48
3.BIOS Setup....................................................................................................................49
3.1 Introduction .............................................................................................................50
3.2 Starting Setup .........................................................................................................50

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
5
3.3 Using Setup ............................................................................................................51
3.4 Getting Help............................................................................................................52
3.5 In Case of Problems................................................................................................52
3.6 BIOS setup..............................................................................................................53
3.6.1 Advanced Menu..................................................................................................................... 53
3.6.1.1 IT8528 Super IO Configuration........................................................................................................53

ARC-1209/1509
6 ARC-1209/1509 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x ARC-1209/1509 Panel PC
1 x Power Adapter
1 x Power cord
4 x screws for VESA

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
7
1.3 System Specifications
Panel
ARC-1209
ARC-1509
LCD Size
12.1", 4:3
15", 4:3
Display Type
XGA
Resolution
1024 x 768
Pixel pitch
0.1905 mm (H) x 0.1905 mm (V)
0.297mm(H) x 0.297mm(V)
Luminance
600 cd/m²
400 cd/m²
Contrast ratio
700
Viewing angle
80 (U), 80 (D), 80 (L), 80 (R)
70 (U), 70 (D), 80 (L), 80 (R)
Response time
16ms
Backlight
LED
Touch Type
5 Wires resistive (A Model)
Projected Capacitive (B Model)
Touch Light
Transmission
80% (A Model)
89% (B Model)
Touch Controller
Onboard USB touch (PenMount) (A Model)
EETI (B Model)
System
SBC
ARC-BYT
Processor
Intel® Atom™ E3845 4-Core 1.91GHz ( A Model)
Intel® Celeron® J1900 4-Core 2.0Ghz (B Model)
I/O Chipset
EC ITE IT8528E
System Memory
1 x 204-Pin DDR3L 1333MHz SO-DIMM up to 8 GB
Watchdog Timer
H/W Reset, 1sec. ~ 65535sec./1sec.step
H/W Status Monitor
Monitoring SYSTEM Temperature and Voltage with Auto Throttling Control
Expansion
1 x Mini PCIe Support mSATA
1 x Optional 80-pin Expansion
Storage
1 x 2.5” Drive Bay
I/O
USB
1 x USB 3.0, 3 x USB 2.0
SATA
1 x SATA II
Com Port
1 x RS-232/422/485 (Factory Optional)
1 x RS-232
Other
3 x Knockouts for Antenna Mounting
Display
Chipset
Intel® Valleyview SoC integrated Graphics
Supports optional dual display
Resolution
HDMI: Max. resolution 1920x1200 @ 60Hz (by IET module)

ARC-1209/1509
8 ARC-1209/1509 Quick Reference Guide
Dual Display
HDMI + LVDS
Audio
Audio Codec
Realtek ALC892
Audio Interface
Speaker Out
Speaker Output
2 x 2W
Ethernet
Chipset
2 x Intel® I210IT (A Model)
2 x Intel® I2101AT (B Model)
Ethernet Interface
10/100/1000 Base-Tx GbE compatible
Lan Port
2 x RJ-45
Power Requirement
Power Connector
Lockable DC Jack
Power Requirement
+12V ~ +26V
Power Type
AT/ATX (ATX is default setting)
Adapter
Input: 100 ~ 240Vac/ 50 ~ 60Hz
Output: 60W Adapter (12V @ 5A Adapter)
Mechanical &
Environmental
System Fan
Fanless
Construction - Front
Silver Aluminum
Construction –Rear
Black
Dimension
284 x 223 x 46 mm (A Model)
294 x 226.3 x 51 mm (B Model)
350 x 274 x 49.8 mm (A Model)
350.5 x 274.5 x 53 mm (B Model)
Weight
2.4 Kgs
3.7 Kgs
Operating
Temperature
-20°C ~ 60°C (-4°F ~ 140°F) (A Model)
-10C ~ 50°C (-14°F ~ 122°F) (B Model)
Storage Temperature
-30°C ~ 70°C (-22°F ~ 158°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Vibration Test
ARC-1209 (A Model)
With SSD/mSATA : 5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis
ARC-1209 (B Model)/ ARC-1509 (A/B Model)
With SSD/mSATA : 3Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis
Shock Test
Operating with SSD/CFast/mSATA : MIL-STD-810G, Method 516.6,
Procedure I, functional shock=20G
Certifications
CE, FCC Class B
OS Information
Win 7, Win 8, Win 10, Linux
Ordering Information/
Description
ACC-ARC-USB-1R
4 x USB3.0 (ARC-BYT DB-A)

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
9
ACC-ARC-AUDIO-1R
HDMI + Audio/Line out, Line in, Mic in (ARC-BYT DB-B)
ACC-ARC-MPCIE-1R
HDMI + Mini PCIe w/ SIM slot (ARC-BYT DB-C)
ACC-ARC-COM-1R
2 x Isolated RS-232 / 2kv (ARC-BYT DB-D)
ACC-ARC-COM-2R
3 x RS-232 (ARC-BYT DB-G)
ACC-ARC-COM-3R
2 x RS-232 + USB 2.0 (ARC-BYT DB-H)
ACC-ARC-COM-4R
2 x RS-232 + LAN (ARC-BYT DB-K)
ACC-ARC-GPIO-1R
12-bit GPIO + 2-pin CAN Bus Kit for ARC Series
ACC-ARC-OBDII-1R
OBDII - CAN Bus Kit for ARC Series (Small Vehicle)
ACC-ARC-OBDII-2R
OBDII - CAN Bus Kit for ARC Series (Large Vehicle)
ACC-ARC-OBDII-3R
OBDII - CAN Bus Kit for ARC Series (Special Large Vehicle)
Note: Specifications are subject to change without notice.

ARC-1209/1509
10 ARC-1209/1509 Quick Reference Guide
1.4 System Overview
1.4.1 I/O View
Connectors
Label
Function
Note
DC-IN
DC Power-in connector
Default: Lockable DC Jack
Option: Phoenix Connector(MOQ apply)
COM1/2
Serial port 1/2 connector
DB-9 male connector
USB
3 x USB 2.0 connector
1 x USB 3.0 connector
LAN1/2
RJ-45 Ethernet 1/2
LED
HDD/Power LED indicator
Power Switch
Power on button

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
11
1.5 System Dimensions
1.5.1 ARC-1209 (A Model)
(Unit: mm)

ARC-1209/1509
12 ARC-1209/1509 Quick Reference Guide
1.5.2 ARC-1209 (B Model)
(Unit: mm)

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
13
1.5.3 ARC-1509 (A Model)
(Unit: mm)

ARC-1209/1509
14 ARC-1209/1509 Quick Reference Guide
1.5.4 ARC-1509 (B Model)
(Unit: mm)

ARC-1209/1509
16 ARC-1209/1509 Quick Reference Guide
2.1 ARC-1209/1509 connector mapping
2.1.1 Serial port 1 connector (COM1)
RS-485
Signal
PIN
PIN
Signal
DATA-
1
6
NC
DATA+
2
7
NC
NC
3
8
NC
NC
4
9
NC
GND
5
RS-232
Signal
PIN
PIN
Signal
NDCDA#
1
6
NDSRA#
NRXDA
2
7
NRTSA#
NTXDA
3
8
NCTSA#
NDTRA#
4
9
NRIA#
GND
5
RS-422
Signal
PIN
PIN
Signal
TxD-
1
6
NC
TxD+
2
7
NC
RxD+
3
8
NC
RxD-
4
9
NC
GND
5
2.1.2 Serial port 2 connector (COM2)
Signal
PIN
PIN
Signal
NDCDB#
1
6
NDSRB#
NRXDB
2
7
NRTSB#
NTXDB
3
8
NCTSB#
NDTRB#
4
9
NRIB#
GND
5

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
17
2.2 Installing Hard Disk & Memory
Step 1. Memory Installation: Remove 3 screws to release the chassis cover, and remove it.
Step 2.1 Insert the SODIMM into the memory socket.
Step 2.2 Re-assemble your system back through previous steps to complete the installation.

ARC-1209/1509
18 ARC-1209/1509 Quick Reference Guide
Step 3. HDD Installation: Insert the HDD into the Drive Bay and fasten 2 screws.

Quick Reference Guide
ARC-1209/1509 Quick Reference Guide
19
2.3 Installing ARC-BYT DB
Step 1. Unfasten 2 screws of the HDD bracket and take it off.
Step 2. Remove 4 screws to release the chassis cover, and remove it.

ARC-1209/1509
20 ARC-1209/1509 Quick Reference Guide
Step 2.1 Insert the ARC-BYT DB into the socket and fasten 3 screws.
Step 2.2 Re-assemble your system back through previous steps to complete the installation
This manual suits for next models
2
Table of contents
Other BCM Advanced Research Touch Panel manuals