BDSK Handels 13180004/01 User manual

121
2 1 1
4
Cx8
1
Ax8 CB x8x3
2
1
Bx8
E
4x4
2
3
1
4
2
1
F
C
1
223
4
4
7
5
6
8
①②③
④⑤ ⑥
⑦ ⑧
2
1
x3
A
F
5x5
3
F
A
4
1
⑨
9
E
x1
F
D
x1
x4
E
Technical Data
Accessory List
M6x12mm M6x35mm
ST4.2x16mm 4x4 5x5(with cross)
M4x12mm
Part List Installation Instruction
No. Part Qty No. Part Qty No. Part Qty
STEP1
STEP2
STEP3
x2
G
x4
H
ST4.2x13mm
Fixed
sheet metal
13180004/01 2 Pers.
40KG
F
5x5
Column Stage
Max. Load Capacity
Input Voltage
Lowest Position
Highest Position
Tabletop Dimensions
Duty Cycle
Temperature
10%(Work continuously for 2 minutes, pause for 18 minutes)
Max Speed

3
6
5
9
安装步骤3安装步骤3安装步骤3
Dx4
F
5x5
1
9
F
D
8
STEP4
STEP5
STEP6
Button
Up Button
Down Button
LED Display
G
H
F
x2
G
F
5x5
x4
H
●Troubleshooting:
a. Reset: When the LED shows" " , press “▼” button until the desk reaches its lowest height and rebounds to stop, it means the reset
has been finished.
b. When it does't work and the LED shows "E01" or "E02", please retry 18 mins later.
c. If the “▼” button does't work, please check the cable connection and then cut off thepower for at least 10 seconds. Reconnect to the
power and press “▼” button to start the reset process when it shows the " ".
d. If all these above process are inefficient, plz contact our customer service.
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Waste disposal
1. Press "▲" or "▼" button and the desk will rise or go down. At the meantime,
the LED display will show the current height.
2. Key button: 1,2,3,4 are the four height memory keys, long press the button
about 3 seconds can record the current height;
3. When the desk is in operation, the 2pin at the back of the control box will not
output a DC 29V voltage; When the desk is not in operation, the 2pin at the back
of the control box will output a DC 29V voltage.
4. Sensitivity switch, long press the up and down button simultaneously for 5
seconds, the anti-collision function will be closed when the screen shows “A-0”;
the sensitivity is at 1 level when the screen shows “A-1”, the sensitivity is at 2 level
when the screen shows “A-2”, the sensitivity is at 3 level when the screen shows
“A-3”, the 3 level is the most sensitive.
BDSK Handels GmbH & Co KG
Mergentheimer Straße 59
97084 Würzburg, Germany.