Beachwaver PRO Series User manual

PRO

OPERATION
ROTATION
HOW TO SET ROTATION SPEED
To turn on the Beachwaver, press and hold the ON/OFF
button for 1 second. The temperature will illuminate to
350ºF. To turn off, press and hold the ON/OFF button
until the second beep. Unplug the iron for cooling.
To change between °F and °C, press +/- buttons
simultaneously for 3 seconds.
To change the temperature, press the ON/OFF button until
it beeps and use the +/- buttons to adjust. It is important to
always select the proper heat settings for your hair type.
Fine or damaged hair: 310ºF - 350ºF (160ºC - 180ºC )
Medium or normal hair: 370ºF - 410ºF (190ºC - 210ºC)
Thick or coarse hair: 430ºF - 450ºF (220ºC - 230ºC)
TO TURN ON/OFF
TO CHANGE TEMPERATURE
Press the “L” key , the “L” indicator light will light
up and beep, then press the “GO” key, and the heating
barrel will rotate clockwise.
Press the “R” key , the “R” indicator light will light up
and beep, then press the “GO” key, and the heating
barrel will rotate counterclockwise.
NOTE: To change from ºF to ºC, Press +/-
buttons simultaneously for 3 seconds.
Press and hold the “L” key for 5 seconds after turning on, the buzzer will make a sound.
At this time, the digital display will display LO and flash 3 times at the frequency of 1
second, then the display will enter the real-time setting temperature. At this time,
press the “GO” key to enter the low speed rotation state.
Press and hold the “R” key for 5 seconds after turning on, the buzzer will make a sound.
At this time, the digital display will display HI and flash 3 times at the frequency of 1
second, then the display will enter the real-time setting temperature. At this time,
press the “GO” key to enter the high speed rotation state.
NOTE: Plug in the power supply and start at high speed by default.
USER MAINTENANCE
The Beachwaver is virtually maintenance-free. If surface becomes dirty,
unplug iron and, when it is cool, wipe the exterior with a cloth. If anything
abnormal occurs, contact [email protected] for support.
Do not attempt to repair iron yourself.
Attempting to repair iron yourself voids warranty.
CARING FOR YOUR BEACHWAVER
STORAGE
WHEN NOT IN USE
Turn off and unplug the curling iron. Allow the iron to cool, and store out of
reach of children in a safe, dry location.
Never wrap the cord around the iron, as this may cause premature wear of the
cord and may lead to cord damage that is not covered under manufacturer’s
warranty.
Handle the cord carefully to extend cord life, and avoid jerking, bending or
twisting the cord, especially at the plug connection.

BW3636AU, BW3636AUA, BW3636AUB, BW3636AUC, BW3636AUD, BW3636AUE,
BW3636AUF, BW3636AUG, BW3636AUH, BW3636AUI, BW3636AUJ, BW3636AUK,
BW3636AUL, BW3636AUM, BW3636AUN, BW3636AUO, BW3636AUP,
BW3636AUQ, BW3636AUR, BW3636AUS, BW3636AUT, BW3636AUU, BW3636AUV,
BW3636AUW,BW3636AUX, BW3636AUY, BW3636AUZ :
73W
BW3434AU, BW3434AUA, BW3434AUB, BW3434AUC, BW3434AUD, BW3434AUE,
BW3434AUF, BW3434AUG, BW3434AUH, BW3434AUI, BW3434AUJ, BW3434AUK,
BW3434AUL, BW3434AUM, BW3434AUN, BW3434AUO, BW3434AUP,
BW3434AUQ, BW3434AUR, BW3434AUS, BW3434AUT, BW3434AUU, BW3434AUV,
BW3434AUW, BW3434AUX, BW3434AUY, BW3434AUZ：
90W