Beamz Magic 2 User manual

MagIc 2

153.734 V2.0

SAFETY INSTRUCTIONS........................................................................................................................................................................................................................................................................................3

LASER SAFETY..........................................................................................................................................................................................................................................................................................................4

INSTALLATION...........................................................................................................................................................................................................................................................................................................5

UNPACKING INSTRUCTION..................................................................................................................................................................................................................................................................................5

POWERSUPPLY.........................................................................................................................................................................................................................................................................................................5

LASER LIFETIME.......................................................................................................................................................................................................................................................................................................5

DMX512 CONTROL ....................................................................................................................................................................................................................................................................................................6

REMOTE CONTROLLER..........................................................................................................................................................................................................................................................................................6

CLEANING.....................................................................................................................................................................................................................................................................................................................7

REPLACING THE FUSE...........................................................................................................................................................................................................................................................................................7

VEILIGHEIDSINSTRUCTIES..................................................................................................................................................................................................................................................................................8

LASER VEILIGHEID...................................................................................................................................................................................................................................................................................................9

INSTALLATIE.............................................................................................................................................................................................................................................................................................................10

UITPAKKEN................................................................................................................................................................................................................................................................................................................10

AANSLUITSPANNING............................................................................................................................................................................................................................................................................................ 10

LASER LEVENSDUUR........................................................................................................................................................................................................................................................................................... 10

DMX BEDIENING........................................................................................................................................................................................................................................................................................................11

AFSTANDSBEDIENING...........................................................................................................................................................................................................................................................................................11

REINIGEN.....................................................................................................................................................................................................................................................................................................................12

VERVANGEN ZEKERING.......................................................................................................................................................................................................................................................................................12

SICHERHEITSHINWEISE.......................................................................................................................................................................................................................................................................................13

LASER SICHERHEITSHINWEISE.......................................................................................................................................................................................................................................................................14

AUSPACKEN...............................................................................................................................................................................................................................................................................................................15

NETZANSCHLUSS ...................................................................................................................................................................................................................................................................................................15

LASERLEBENSDAUER ..........................................................................................................................................................................................................................................................................................15

DMX BEDIENUNG.................................................................................................................................................................................................................................................................................................... 16

FERNBEDIENUING.................................................................................................................................................................................................................................................................................................. 16

REINIGUNG..................................................................................................................................................................................................................................................................................................................17

SICHERUNGWECHSEL..........................................................................................................................................................................................................................................................................................17

INSTRUCCIONES DE SEGURIDAD....................................................................................................................................................................................................................................................................18

SEGURIDAD LASER................................................................................................................................................................................................................................................................................................ 19

INSTALACION...........................................................................................................................................................................................................................................................................................................20

INSTRUCCIONES DE DESEMBALAJE..........................................................................................................................................................................................................................................................20

FUENTE DE ALIMENTACIÓN............................................................................................................................................................................................................................................................................20

CONTROL DMX512 ...................................................................................................................................................................................................................................................................................................21

MANDO A DISTANCIA ............................................................................................................................................................................................................................................................................................21

 
LIMPIEZA....................................................................................................................................................................................................................................................................................................................22 
CAMBIANDO EL FUSIBLE ..................................................................................................................................................................................................................................................................................22 
 
INSTRUCTIONS DE SECURITE.........................................................................................................................................................................................................................................................................23 
SECURITE LASER................................................................................................................................................................................................................................................................................................... 24 
INSTALLATION........................................................................................................................................................................................................................................................................................................ 25 
INSTRUCTIONS DE DEBALLAGE.................................................................................................................................................................................................................................................................... 25 
ALIMENTATION....................................................................................................................................................................................................................................................................................................... 25 
LASER LIFETIME.................................................................................................................................................................................................................................................................................................... 25 
GESTION DMX512...................................................................................................................................................................................................................................................................................................26 
TELECOMMANDE...................................................................................................................................................................................................................................................................................................26 
NETTOYAGE.............................................................................................................................................................................................................................................................................................................27 
REMPLACEMENT DU FUSIBLE....................................................................................................................................................................................................................................................................... 27 
 
INSTRUKCJA BEZPIECZENSTWA .................................................................................................................................................................................................................................................................28 
LASER SAFETY.......................................................................................................................................................................................................................................................................................................29 
INSTALACJA............................................................................................................................................................................................................................................................................................................30 
ROZPAKOWYWANIE INSTRUKCJI ................................................................................................................................................................................................................................................................30 
ZASILACZ...................................................................................................................................................................................................................................................................................................................30 
LASEROWY CZAS ZYCIA......................................................................................................................................................................................................................................................................................31 
KONTROLA DMX512................................................................................................................................................................................................................................................................................................31 
PILOT ZDALNEGO STEROWANIA.....................................................................................................................................................................................................................................................................31 
CZYSZCZENIE..........................................................................................................................................................................................................................................................................................................32 
WYMIANA BEZPIECZNIKA ................................................................................................................................................................................................................................................................................32 
 
CONTROL MENU.....................................................................................................................................................................................................................................................................................................33 
DMX CHANNELS.................................................................................................................................................................................................................................................................................................... 34 
TECHNICAL SPECIFICATIONS.........................................................................................................................................................................................................................................................................35 
 
 
 

Before carrying out any operations with the unit, carefully read this instruction manual and keep it with care for future reference. It

contains important information about the installation, usage and maintenance of the unit.

•Unpack and check carefully that there is no transportation damage before using the unit

•Please read these instructions carefully and follow the instructions.

•Observe all safety warnings. Never remove safety warnings or other information from the equipment.

•Be sure that no ventilation slots are blocked; otherwise the unit will overheated.

Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on

the equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the

mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.

•After connecting the unit, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.

•Make sure that the power cord is never crimped or damaged. Check the unit and the power cord from time to time.

•Always disconnect power from the mains, when unit is not used or before cleaning! Only handle the power cord by the plug. Never pull out the

plug by tugging the power cord.

•Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.

•Do not switch the unit on and off in short intervals.

•Do not connect the unit to a dimmerpack.

•Install the unit in a well ventilated place.

•Never place any material over the lens.

•Never let the sunlight lights directly to the front lens , even when the unit is not working.

•Always allow free air space of at least 50 cm around the unit for ventilation.

•Make sure that the area below the installation place is blocked when rigging, derigging or servicing the unit.

•For mounting height >100 cm, always fix the unit with an appropriate safety-rope. Fix the safety-rope at the correct fixation points only. The

safety-rope must never be fixed at the transport handles!

•Never look directly at the light beam. Please note that fast changes in lighting, e. g. flashing light, may trigger epileptic seizures in photosensitive

persons or persons with epilepsy.

•This unit is not designed for permanent operation. Consistent operation breaks will ensure that the unit will serve you for a long time without

defects.

If the power cord of the unit is equipped with an earthing contact, then it must be connected to an outlet with a protective ground.

Never deactivate the protective ground of a power cord.

•Make sure that the unit is not exposed to extreme heat, moisture or dust.

•Clean the unit using a dry cloth.

•Do not touch the unit bare-handed during its operation (housing becomes very hot). Allow the unit to cool for at least 5 minutes before

handling.

•This unit is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of fluid (does not apply to special outdoor

equipment - in this case, observe the special instructions noted below). Do not expose this unit to flammable materials, fluids or gases.

•If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising

condensation water might damage your unit. Leave the unit switched off until it has reached room temperature.

•Never attempt to bypass the thermostatic switch or fuses.

•Do not dismantle or modify the unit.

•For replacement use fuses/bulb of same type and rating only.

•Repairs, servicing and electric connection must be carried out by a qualified technician.

•The ambient temperature must always be between 10°C and 35°C.

•If this unit is operated in any other way, than the one described in this manual, the product may suffer damages and the warranty becomes

void.

•Plastic bags must be kept out of reach of children.

•Unit must be installed out of the reach of children. Never leave the unit running unattended.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which

could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For

more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop

where you purchased the product.

Laser Light is different from any other light source with which you may be familiar. The light from this product can potentially cause eye injury if not set up

and used properly. Laser light is thousands of times more concentrated than light from any other kind of light source. This concentration of light power

can cause instant eye injuries, primarily by burning the retina (the light sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser

beam, it can still potentially injure or blind you or your audience. Even very small amounts of laser light are potentially hazardous even at long distances.

Laser eye injuries can happen quicker than you can blink.

It is wrong to assume that a single beam of a bundle of hundreds by the laser beams made, it cannot cause injury.

It is also incorrect to assume that it is safe to look at a moving beam. In the laser safety regulation, it is not legal to aim Class 3B/4 lasers in areas which

people can get exposed also on a dance floor.

•Do not point lasers at people or animals.

•Never look into the laser aperture or laser beams, this can potentially cause instant eye injury or blindness if laser light directly strikes the

eyes.

•Do not point lasers in areas in which people can potentially get exposed, such as uncontrolled balconies, etc.

•Install the laser units such that laser beams above the audience move See section later in this manual.

•Test the laser units always first before the public is present.

•Do not point lasers into the public or at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser reflections can be

hazardous.

•Never point a laser at aircraft or into the sky, this is a federal offense.

•Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation

exposure.

•Do not expose the output optic (aperture) to cleaning chemicals.

•The operation of a laser is only allowed if the show is controlled by a skilled and well-trained operator familiar with the requirements that

are needed.

•Do not use laser if housing is damaged or open, or if optics appear damaged in any way.

•Never leave this device running unattended.

•Always use appropriate lighting safety cables when hanging lights and effects overhead.

The legal requirements for using laser entertainment products vary from country to country. The user is responsible for the leg al requirements at the

location/country of use.

This unit contains laser components with high power, live parts and parts that emit radiation. Therefore, the housing,

It can also cause blindness, skin burns and fires.

Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from

“www.laserinstitute.org”. Many local governments, corporations, agencies, military and others, require all lasers to be used under the guidelines of ANSI

Z136.1. Laser Display guidance can be obtained via the International Laser Display Association, www.laserist.org.

The use in France is only allowed to the professional user and not to the end user.

See decision: www.legifrance.gouv.fr

Please consider the respective national norms during the installation! The installation must only be carried out by an authorized

employee or dealers!

This fixture has been designed to be hung. It is recommended for safety purposes, your lighting effect are properly mounted using a suitable hanging

clamp and safety cable. Items appropriate for safe and effective mounting are easily sourced from your lighting vendor.

International laser safety regulations require that lasers must be operated in the fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical

separation between the floor and the lowest laser light vertically. Additionally, 2.5 meters of horizontal separation is required between laser light and

audience or other public spaces.

Use of controls, adjustments, or performance of procedures other than what is specified herein may result in hazardous radiation

exposure!

•The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming

deformation.

•Always use the supplied mounting bracket to hang the fixture.

•The fixture should aid of a mounting bracket (not included) to the supplied mounting bracket to be confirmed.

•The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This secondary safety attachment

must be constructed in a way that no part of the installation can fall down if the main attachment fails.

•Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.

•The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation

for the first time and after changes before taking into operation another time.

•The operator has to make sure that safety-relating and machine-technical installations are approved by a

skilled person once a year.

•The fixture should be installed in the position where persons cannot reach.

•For your own safety and for others, we do strongly recommend you to use this laser emergency kill switch.

(ref.no: 152.958)

When installing the device, make sure there is no highly in inflammable material (decoration articles, etc.) in between a distance of

min 0.5 meter.

Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present, and

have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damage from

shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product must be returned to

the factory, it is important that the product be returned in the original factory box and packing.

If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water

might damage your unit. Leave the unit switched off until it has reached room temperature.

On the label on the backside of the unit is indicated on this type of power supply must be connected. Check that the mains voltage corresponds to this, all

other voltages than specified, the light effect can be irreparably damaged. The product must also be directly connected to the mains and may be used. No

dimmer or adjustable power supply.

Always connect the unit to a protected circuit (circuit breaker or fuse). Make sure the unit has an appropriate electrical ground to

avoid the risk of electrocution or fire.

Follow below advice to enjoy a longer laser lifetime:

•Quick on/off switching of this device will reduce durability of the laser diode dramatically.

•Ensure that device does not get overheated:

oSwitch off device when it is not needed. Diodes are switched on and can wear out even if

there is no visible laser output.

oSwitch off device after 1 hour and let the laser cooling down for 15 minutes.

oEnsure that the fans and heat sinks are free of dust and dirt.

If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the first unit in a DMX chain.

Always connect the output of one unit with the input of the next unit until all units are connected.

At the last unit, you must close the DMX line with a terminating resistor. Take an XLR connector and solder a 120 Ohm resistor

between signal (-) and signal (+) and connect it to the DMX output of the last unit in the line.

Press the red button to turn the device on, press again to turn in standby mode.

Automatic mode will enable you to run the automatic programs on the product.

To turn on Automatic mode, press on the remote controller.

To change the colour of the strobe, press .

To put the UV light on press , to put the UV light off press once again.

To turn on Sound-Active mode, press on the remote controller.

To turn on the red or green laser on, press .

To change the strobe with LEDs, press .

To change the derby effect.

1. Press on the remote controller.

2. Press or to change effect.

To change the speed of colour change, colour fade, sound active and strobe modes.

1. Press on the remote controller.

2. Press or to increase or decrease the speed of colour change.

To adjust sound sensitivity for in Sound-Active mode

1. Press on the remote controller.

2. Press or to either increase or decrease sound sensitivity(note: only available in sound active mode).

The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery contacts prevents the

battery from being discharged during storage. Prior to the first operation remove the foil from the battery support on the rear side of the

remote control. Otherwise operation of the remote control is not possible.

If the range of the remote control decreases, replace the battery. For this purpose, on the rear side of the remote

control press the small bar with the groove to the right (1) and at the same time remove the battery support (2). For

operation, one 3 V button cell type CR 2025 is required. When inserting, pay attention that the positive pole of the

button cell shows upwards in the support.

The buildup of dust, dirt and other airborne particles will reduce the unit’s light output. It will also prevent the unit from cooling correctly, and this will

reduce the unit’s lifetime. The rate of dirt buildup will vary depending on environmental factors such as airborne dust, use of smoke machines, airflow

from ventilation systems, etc. The unit’s cooling fans will accelerate buildup, and any smoke particles that are present in the atmosphere will increase the

tendency for dirt to clog.

To get the best performance and lifetime from the unit, inspect it regularly and clean it as soon as you see signs of dirt buildup.

Assess the operating environment each time you begin to use the unit. In dusty or smoky conditions, inspect the unit after a few hours and check it

frequently the unit may attract dirt faster than you expect. Draw up a cleaning schedule that will make sure that dirt is removed before it can build up.

Use the following guidelines:

•Disconnect the unit from power and allow it to cool completely before cleaning.

•Do not use solvents, abrasives or any other aggressive product to clean the unit.

•Vacuum or use low-pressure compressed air to remove dust and loose particles from surfaces and air vents. Prevent the blades of cooling fans

from turning before you aim a vacuum or air jet at the fan, or you may spin the fan too fast and damage it.

•Clean glass components by wiping gently with a soft, clean, lint-free cloth moistened with a weak detergent solution. Put the solution on the cloth

and not on the surface to be cleaned. Avoid rubbing glass surfaces.

•Dry the unit with a soft, clean, lint-free cloth or low-pressure compressed air before reapplying power.

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

Lees deze gebruiksaanwijzing zorgvuldig door voordat u met het apparaat gaat werken en bewaar deze handleiding voor

toekomstig gebruik. Het bevat belangrijke informatie over de installatie, het gebruik en het onderhoud van het apparaat.

•Uitpakken en zorgvuldig controleren of er geen transportschade is voordat u het apparaat gebruikt.

•Lees deze instructies aandachtig door en volg de instructies op.

•Neem alle veiligheidswaarschuwingen in acht. Verwijder nooit veiligheidswaarschuwingen of andere informatie van het apparaat.

•Zorg ervoor dat er geen ventilatiesleuven geblokkeerd zijn, anders zal het apparaat oververhit raken.

Voordat u het apparaat verbind met een contactdoos, moet u eerst controleren of de netspanning en -frequentie

overeenkomen met de op de apparatuur aangegeven waarden. Als het apparaat een spanningsselectieschakelaar heeft, sluit het apparaat alleen aan

op het stopcontact als de waarden van het apparaat en de waarden van de netspanning overeenkomen. Als het bijgeleverde netsnoer of de

voedingsadapter niet in uw stopcontact past, neem dan contact op met uw elektricien.

•Controleer na het aansluiten van het apparaat alle kabels om schade of ongevallen, bijv. door struikelgevaar, te voorkomen.

•Zorg ervoor dat het netsnoer nooit gekrompen of beschadigd raakt. Controleer het apparaat en het netsnoer van tijd tot tijd.

•Trek altijd de stekker uit het stopcontact wanneer het apparaat niet wordt gebruikt of voordat u het apparaat schoonmaakt! Pak het netsnoer

alleen bij de stekker vast en trek nooit aan het netsnoer.

•Haal de stekker van het netsnoer en de voedingsadapter uit het stopcontact als er gevaar bestaat voor blikseminslag of voor langere perioden

van buitengebruikstelling.

•Schakel het apparaat niet snel achter elkaar in en uit.

•Sluit het apparaat niet aan op een dimmerpack.

•Installeer het apparaat op een goed geventileerde plaats.

•Plaats nooit materiaal over de lens.

•Laat het zonlicht nooit direct op de lens schijnen, ook niet als het apparaat niet in werking is.

•Zorg altijd voor een vrije luchtruimte van minstens 50 cm rondom het apparaat voor ventilatie.

•Zorg ervoor dat de ruimte rondom en onder de montageplek wordt afgezet tijdens het (de)monteren of onderhoud van het apparaat.

•Voor gebruik bij montagehoogte >100 cm, bevestig het apparaat altijd met een geschikte veiligheidskabel. Bevestig de veiligheidskabel alleen op

de juiste bevestigingspunten. De veiligheidskabel mag nooit aan de transporthandgrepen worden bevestigd!

•Kijk nooit direct naar de lichtbundel. Houd er rekening mee dat snelle veranderingen in de verlichting, bijv. knipperlicht, epileptische aanvallen

kunnen veroorzaken bij lichtgevoelige personen of personen met epilepsie.

•Dit apparaat is niet ontworpen voor permanent gebruik. Consistente bedieningspauzes zullen ervoor zorgen dat het apparaat lang zonder

defecten van dienst zal zijn.

Als het netsnoer van het apparaat is voorzien van een aardingscontact, moet het worden aangesloten op een stopcontact met

een beschermende aarding. Deactiveer nooit de beschermende aarding van een netsnoer.

•Zorg ervoor dat het apparaat niet wordt blootgesteld aan extreme hitte, vocht of stof.

•Reinig het apparaat met een droge doek.

•Raak het apparaat tijdens de werking ervan niet met blote handen aan (de behuizing kan zeer heet worden). Laat het apparaat ten minste 5

minuten afkoelen alvorens deze te hanteren.

•Dit apparaat is uitsluitend ontworpen voor gebruik binnenshuis, gebruik deze apparatuur niet in de onmiddellijke nabijheid van vloeistof (niet

van toepassing op speciale buitenapparatuur - in dit geval, neem de speciale instructies hieronder in acht). Stel dit apparaat niet bloot aan

brandbare materialen, vloeistoffen of gassen.

•Als het apparaat is blootgesteld aan drastische temperatuurschommelingen (bijv. na transport), schakel het dan niet onmiddellijk in. Het

ontstane condenswater kan uw apparaat beschadigen. Laat het apparaat uitgeschakeld tot het op kamertemperatuur is.

•Probeer nooit de thermostaatschakelaar of zekeringen te omzeilen.

•Demonteer of wijzig het apparaat niet.

•Gebruik voor vervanging alleen zekeringen/lampen van hetzelfde type en vermogen.

•Reparaties, onderhoud en elektrische aansluiting moeten worden uitgevoerd door een gekwalificeerde technicus.

•De omgevingstemperatuur moet altijd tussen 10°C en 35°C liggen.

•Als dit apparaat op een andere manier wordt gebruikt dan beschreven in deze handleiding, kan het product beschadigd raken en vervalt de

garantie.

•Plastic zakken moeten buiten het bereik van kinderen worden gehouden.

•Het apparaat moet buiten het bereik van kinderen worden geïnstalleerd. Laat het apparaat nooit zonder toezicht draaien.

Dit symbool op het product of op de verpakking geeft aan dat dit product niet als huishoudelijk afval mag worden behandeld. In plaats daarvan

moet het worden overhandigd aan het toepasselijke inzamelpunt voor de recycling van elektrische en elektronische apparatuur.

Door ervoor te zorgen dat dit product op de juiste wijze wordt afgevoerd, helpt u mogelijke negatieve gevolgen voor het milieu en de menselijke

gezondheid te voorkomen, die anders zouden kunnen worden veroorzaakt door ongepaste afvalverwerking van dit product. Het recyclen van

materialen draagt bij tot het behoud van natuurlijke hulpbronnen. Voor meer gedetailleerde informatie over het recyclen van dit product kunt u

contact opnemen met uw plaatselijke gemeente, uw huisvuildienst of de winkel waar u het product hebt gekocht.

Laserlicht is anders dan ander licht wat u gewoon bent. Laserlicht kan n.l. (oog)letsel veroorzaken. Laserlicht is duizenden keren geconcentreerder dan

normaal licht. Deze lichtconcentratie kan het netvlies verbranden. Zelfs als de warmte van een laserstraal niet gevoeld kan worden, kan het oogletsel of

blindheid veroorzaken. Zelfs een kleine concentratie en een straal die ver verwijderd is kan gevaarlijk zijn.

Het is onjuist te veronderstellen dat één straal uit een bundel van honderden door de laser gemaakte bundels, geen letsel kan veroorzaken.

Het is ook onjuist te veronderstellen dat het veilig is in een bewegende straal te kijken. In de wet staat dat het verboden is, bij gebruik van een Klasse 3B/4

laser, de laserstraal op individuen te richten en/of daaronder zoals op dansvloeren enz..

•Richt een laserstraal nooit op mensen en dieren. Kijk nooit in de laseropening of laserstralen, dit kan oogletsel of blindheid veroorzaken.

•Richt de laserstraal nooit op gebieden waar mensen mogelijk blootgesteld kunnen worden aan de laserstraal, bijvoorbeeld hoger gelegen

balkons etc.

•Plaats de laserunits zodanig dat laserstralen boven het publiek bewegen. Zie verderop in deze handleiding.

•Test de laserunits altijd eerst voordat het publiek aanwezig is.

•Het is verboden en gevaarlijk de laserstraal in het publiek te schijnen, of daar te schijnen waar reflecties zoals ramen, spiegels, e.d het

publiek bereiken. Ook reflecterende stralen zijn gevaarlijk!

•Richt de laserstaal nooit op vliegtuigen of in de open lucht, dit is een strafbaar feit.

•Het afstellen of gebruik anders dan omschreven in deze handleiding kan leiden tot een gevaarlijke blootstelling aan ongewenste straling.

•Gebruik geen reinigingsmiddelen en/of chemische middelen om de lens schoon te maken.

•Laat de bediening van een laser over aan vakbekwame mensen die vertrouwd zijn met de gestelde eisen die hiervoor nodig zijn.

•Gebruik de laserunit nooit als de behuizing is beschadigd, als de behuizing is geopend of als de optiek op enige wijze beschadigd lijkt.

•Laat een (werkende) laserunit nooit onbeheerd achter.

•Gebruik altijd een veiligheidsketting wanneer een laser op hoogte wordt gemonteerd.

De wettelijke vereisten voor het gebruik van laserapparatuur verschillen per land. De gebruiker is verantwoordelijk voor de toepassing van de wettelijke

vereisten zoals die in het betreffende land/regio gelden.

Deze unit bevat laseronderdelen met een hoogvermogen, onder spanning staande delen en delen die straling afgeven. daarom

de behuizing, Het kan ook blindheid, huidverbranding en brand veroorzaken.

Verdere richtlijnen en veiligheidsprogramma's voor het veilige gebruik van lasers zijn te vinden in de ANSI Z136.1 Standaard “voor het veilige gebruik van

lasers”, beschikbaar bij het Laser Institute of America: www.laserinstitute.org. Vele plaatselijke overheden, bedrijven, agentschappen, legers en andere

instanties vereisen allemaal dat lasers worden gebruikt onder de richtlijnen van ANSI Z136.1. De richtlijn voor laservertoning kan worden verkregen via de

International Laser Display Association: www.laserist.org. Emissiegegevens van de laser zoals gemeten onder IEC-meetomstandigheden voor classificatie.