BEAUTME BM3H User manual

WALL-MOUNTED LED BATHROOM MIRROR
USER MANUAL
For warranty , please kindly contact us for return policy if any issues happen.
(1) Please read the instructions carefully before using.
(2) Make sure that your charging device is adequate for the mirror voltage rating before
using.
(3)Turn o󽗈 the power and avoid direct sunlight if not used or stored for a long time. Far
away from children's access.
(4) Please do not disassemble or remodel mirror, and keep it away from sharp things.
(5) Please do not use corrosive liquids to clean the mirror.
(6) Please do not violently throw, hit and rub mirror.
(7) Do not approach or put the product into the 󽗉re in case of 󽗉re or explosion.
(8) Please stop using it immediately if abnormality occurs hapen.
1524mm / 60"
1016mm / 40"
29.5mm
/ 1.2"
Notice
Operating Instruction
3 color lights modesTouch switch Brightness
OFF ON

Product Information
Name Wall-Mounted LED Bathroom Mirror
Model BM3H
Voltage 12V 4A
Lighting Power Max 48W
Input UL110V
Product Size 1524×1016×29.5mm (60×40×1.2 inches)
Frame Color Silver
Color Temperature White Light 6500K, Natural Light 4800K, Warm Light 3200K
Material Aluminium + Glass
Included accessories
Product Installation
Step 1. Foam pads installation
1. Paste the foam pad to the back of the mirror 2. Horizontal paste position
Hook screw *6Expansion pipe *6Hook *2Foam pads *2
1 2 3 4
4. Hang up the
mirror as above
demonstration
Step 2. Wall-Mounted Mothod
1. Choose a suitable
location on the wall
and mark it
2. Drill holes and insert
the expansion tube
into the hole
3. Fix the hook with
screws
1. connect to power source
directly by using the plug
installed
2. Connect by the connector provided. The method
as follows:
a. remove the plug by pull up the buttons of the
connector
b. connect the wire from your home power source
to one end of the connect
c. make sure all wires settled 󽗉rmly
Step 3. Two Ways Of Connection