Bebe style PINK User manual

INSTRUCTIONS
BABY WALKER
Approximately from 6 months of age
Maximum weight is 12kgs
ENGLISH

WARNINGS
THESE INSTRUCTIONS ARE VERY IMPORTANT.
PLEASE READ THROUGH CAREFULLY, AND RETAIN FOR
FUTURE REFERENCE.
PLEASE READ THOROUGHLY BEFORE ASSEMBELING, AS
AN INCORRECTASSEMBLING COULD BE DANGEROUS.
THIS PRODUCT SHOULD ONLY BE ASSEMBLED BY AN
ADULT.
WARNING — Never leave the child unattended.
WARNING — The child will be able to reach further and move
rapidly when in the baby walker.
WARNING — Never attempt to adjust the height of the walker
with the child inside.
User Instructions:
Prevent access to stairs, steps and uneven surfaces;
Guard all fires, heating and cooking appliances;
Remove hot liquids, electrical flexes and other potential hazards from
reach;
Prevent collisions with glass in doors, windows and furniture;
Do not use the baby walker if any components are broken or missing;
This baby walker should be used only for less than 20 minutes.
This baby walker is intended to be used by children who can sit unaided,
approximately from 6 months. It is not intended for children weighing
more than 12 kg;
Do not use replacement parts other than those approved by the
manufacturer ;
Insert two 1.5V5 batteries. (not included)
Different types of batteries or new and used batteries are not be mixed.
Batteries that have run out SHOULD be removed from the toy.
The supply terminals are not to be short-circuited.
Please keep all the relevant information for future reference
Maintenance Tips:
Make sure all pieces that need fastening are tightened before use.
Please check the product over regularly, and keep it in safe places when
not used.
Grease revolving parts such as the friction points of every axles and
rotatable parts to guarantee flexibility with solid oil to prolong the life
span, and check and fasten the screwed joints once a week.
Do not use or store in moist ,frigid or high-temperature environments.

Wheel Assembly
Place the walker on a stable
and even surface. Insert the
four caster stems into the
four plastic holes of the
lower base (fig 1)
Back of Seat Unit
Insert the plastic support into the
fabric seat. Use the Loop found in
the middle of the fabric seat to
secure the seat to the back
support. then push the five plastic
pins on the back of the cushion
into the pin holes found on the top
of the tray. When the pins are fully
inserted use the plastic bolts
provided to secure the seat onto
the frame of the walker (fig 2)
Insert the plastic support into the
fabric seat. Use the Loop found in
the middle of the fabric seat to
secure the seat to the back
support. then push the five plastic
pins on the back of the cushion
into the pin holes found on the top
of the tray. When the pins are fully
inserted use the plastic bolts
provided to secure the seat onto
the frame of the walker.
Music Tray Installation
Before yo
u install the music tray
you must insert 2 x 1.5V AA
batteries. Open the battery cover
located on the back of the music
tray and insert the batteries
ensuring the polarity is correct.
then place the toy on top of the
tray into the slot. Secure the music
tr
ay by attaching the toggles to
the underside and turning 90˚ (fig
3)
Figure 2

Figure 4
WARNING — Never leave the child unattended.
WARNING — The child will be able to reach further and move
rapidly when in the baby walker.
WARNING — Never attempt to adjust the height of the walker
with the child inside.
To Adjust the Height
Place one hand on top of the
baby walker and with the other
hand press the button beneath
the tray to adjust the height
position. Turn the safety lock by
90˚ to lock the tray into place.
Always make sure the lock is
engaged before placing your
child in the walker.
Made in China for Bebe Style Ltd
NW2 1BG
[e-mail]
www.bebestyle.co.uk
WARNING: Never leave
a child unattended in this
product.