Bebob ML-120EPIC User manual

bebob factoryGmbH – Höglwörtherstr. 350 – D-81379München – Tel.: [phone]
www.bebob.de
April2016
ML-120EPICHotSwapAdapter
User Manual
WE STRONGLYRECOMMEND THATYOU
READTHIS INSTRUCTIONBEFORE USING
YOUR BEBOBML-120EPICHOTSWAP
ADAPTER!PLEASE KEEP THIS MANUAL
FORFUTURE REFERENCE
Features
·Automaticswitchingbyemptybatteriesto allowcontinuouspowering ofthe REDEpicfor
120s
·2 Step emptybattery-alarm
·20Wh built-inpower-buffer
·12V(unreg.)D-Tap Portwith self-resetting 5AFuse
·Zero maintenance required
·works onlywith V-Mount Lithium-Ion Battery(nominal voltage between14.4Vand
14.8V)
·Mounts onlyon the REDEpic
Charging
·The ML-120EPIC chargesitselffromthe V-Mount battery
·At first charge orIfcompletelyempty, the ML-120EPICwillbe readyto use after60
minutes
·While Charging theyellow "Charging"LED turnson
·When fullychargedthegreen „Ready“LED turnson
·The ML-120EPIC chargesitselfautomaticallywhen needed.
·During charging The ML-120EPIC keep monitoring the voltage ofthebatteryand is ready
to switchifneeded

bebob factoryGmbH – Höglwörtherstr. 350 – D-81379München – Tel.: [phone]
www.bebob.de
April2016
BatterySwap
·The ML-120EPIC detectsabatteryasemptywhen the voltage dropsbelow 12,5V
·The ML-120EPIC instantlytakesoverpowering the RED Epicand the D-Tap port fora
maximumof2 minutesanddisplaysa redLED alarm
·The LEDAlarmflashesfor90s, turnsto solid forthe last 30s.
·Afterthe emptybatteryhasbeen replacedbya charged one (voltage underload of over
14,5V), powering ofthe RED Epicinstantlyrevertsto the V-Mount battery.
·The ML-120EPIC switchesup to6 Timesbefore running empty
·Ifthe emptybatteryisnot replaced within2 minutesthe ML-120EPIC and the RED Epic
willswitchoff.
Alarm LED´sbrightness
·To allowthe AlarmLED to be visibleinbright environments(sunlight etc.)butnot
disturbinglyoverbrightindarkerenvironments(studioetc.), the ML-120 hasautomatic
brightness adjust.
·The brighterthe environment the brighterthe alarmLEDwill show.
·The environment lightdetectorislocated at the top – middle ofthe ML-120 housing.
·Covering the housing (withtape forinstance)willswitch off the automaticbrightness adjust
and the alarmLEDwillflashwith minimumbrightness
Safetyinstructions
·Onlyforprofessionaluse!Keep Chargerout ofreachofchildren and personnelthat has
not beeninstructed in the use!
·Use onlywith recommended batteries.
·Keep the ML-120EPIC dryand do not immerse inwater.
·Do not attempt to open orrepairthe ML-120V7V. Contact yourdealerforhelp ifit becomes
defective.
·Handlewithcare!Do not throw!Do not drop!
Warranty
·The ML-120EPIC iscovered bya 2years unconditionalwarrantyon allparts,except the
cells.
·The cellsare covered bya 2yearwarranty,80%oftheoriginalcapacity.
·Forwarrantyissuesorif you haveanyadditionalquestions,please contact the appropriate
bebob distributorlisted at www.bebob.de.

bebob factoryGmbH – Höglwörtherstr. 350 – D-81379München – Tel.: [phone]
www.bebob.de
April2016
Specifications
Model ML-120EPIC
Connection (camera) REDEpic
Batteries Li-ion 14,4Vor14,8V
BatteryMount V-Mount
RunningTime 2 Minutes
Voltage 14,4V
Cells Li-IonTrimixHL made in Japan
MaximumLoad 15.0A
D-Tap 1(max5.0A)Self-reset Fuse
Charging Mode Automatic
Charging Time Max60 Minutes
Display Charge/ready
Dimensions(WXHXD) 140 x76 x45mm
Weight 0,52 Kg