Becker GPS Navigator User manual

OPERATING GUIDE

2
>>> CONTENTS
Contents 2
24-month warranty 6
Warranty 6
Safety instructions 7
The Navigation device 9
Operating manual contents 9
Use of the product 9
Navigation 9
Images* 9
Telephone (selected models) 10
Unpacking the Navigation device 10
Checking the contents 10
Overview of functions 10
Scope of delivery 11
Complaints 11
Handling the packaging 11
Description of the device 11
The basic unit 12
Cable for power supply from
cigarette lighter 12
Battery 12
USB connection cable 12
Unit bracket 12
Accessories 12
Mains power supply unit 12
Cable for vehicle integration
(for certain models only) 13
Information about the documentation 13
Quick Start Guide 13
Operating instructions 13
Registration 13
Repairs 13
Emissions and disposal 13
Overview of the scope of Delivery 14
Overview of the navigation device 15
General operation 17
Maintenance and care 17
Battery quality declaration 18
Display quality declaration 18
Start-up 18
Power supply 18
Using the battery 19
Connection for the cigarette lighter 19
Connection to the mains outlet 20
Connecting to power supply 20
TMC antenna
(depending on the model) 20
GPS antenna 20
Unit antenna 20
Cable for vehicle integration
(depending on model, optional) 21
Cable for rear view camera
(depending on the model, optional) 21
Memory card 21
Inserting the memory card 22
Ejecting the memory card 22
Unit bracket 22
Fitting the unit bracket 22
On the windscreen 23
Adjusting the unit holder’s position 24
Attaching the Navigation device 24
Removing the Navigation device 24
Devices with magnetic holders 24
Switching the Navigation
device on/off (model dependent) 24
Switching on 25
Switching off (depending on model) 25
Basic information about the touch
screen 26
Operation 26
Calibration 26
Basic information about the menus 27
The main menu 27
Entries made with the entry menu 28
Entering characters 28
Accepting proposals 28
Scrolling through the lists 29
Special characters and accent marks 29
Other character sets 30
Entering numbers 30
Switching between upper
and lower case: 30
Deleting characters 31
Inserting spaces 31
The back button 31
Content Manager 31
Installing the Content Manager 32
Starting the Content Manager 32
Transferring pictures 33
Faults 34
Contents

3
CONTENTS >>>
Navigation Mode 35
What is navigation? 35
Selecting Navigation 36
Home address 36
Smart Guess 37
Last destinations list 37
The destination list 37
Icons used 38
Operating the last destinations list 38
Start with existing destination 38
Scrolling through stored destinations 38
Displaying or editing a destination 38
Personal destinations 39
Contacts 39
Selecting a destination from Personal
destinations 39
Editing Personal destinations 40
Selecting a destination from Contacts 40
The New destination menu 41
Layout of the New destination menu 42
Enter address 42
Select Point of Interest 42
Travel Guide (model dependent) 42
Select on map 42
Enter geo-coordinates 42
Route planning 42
Entering the address 42
Selecting a country 43
Selecting an address and
starting route guidance 43
Entering address by speech
(selected models) 48
Live POI Search (model dependent) 49
Points of interest 49
Point of interest in the vicinity 50
Point of interest near to an address 51
Point of interest near to destination 52
POI on route 52
Entering a point of interest directly 52
Calling special destination phone
number
(depending on the model) 52
Additional point of interest
information 53
Travel Guide (model dependent) 53
Selecting a destination from the map 53
Coordinate entry 54
Route planning 55
Simulation of the route 56
Creating a new route 57
Editing a route 58
Optimising a route 58
Navigation settings 59
The Map view button 59
Auto zoom 61
Select POI categories 61
Selecting Info box data fields 62
3D city view 62
The Route overview button 63
The Guidance info button 64
The Route options button 65
Selecting the vehicle profile
(depending on model) 65
Truck and mobile home functions
(depending on model) 66
Setting truck profiles 67
Selecting vehicle category and name 69
Selecting the route type 70
Time-dependent route guidance 70
Avoiding particular types of road 70
The TMC button 71
The Traffic Button (model dependent) 71
The Voice guidance button 72
Setting the Voice 73
Setting the Volume 73
The Warnings button 73
Setting Driver alerts 74
Setting environmental zones
(depending on model) 75
Truck warnings
(depending on model) 75
Setting Speed info 76
The Blocked roads button 77
The Vehicle data button 78
The Format button 79
The Time button 79
The Reset button 79
Traffic announcements using TMC
(depending on the model) 80
Live Traffic - Traffic Announcements
via Data Connection
(model dependent) 80
Displaying TMC messages on the map 81
Using TMC 81
Reading a message 82

4
>>> CONTENTS
Taking announcements into
consideration when calculating routes 83
Automatic recalculation 83
Manual recalculation 83
The map display 84
Calling up the map display 84
Structure of the map display 84
Map display without route guidance 84
Map display with route guidance 84
The Information box 85
Split screen with route guidance 86
Route guidance with arrow display 87
Lane Assistant Pro 3D
(model dependent) 87
Map display with Junction view 87
Tunnel view 88
Using the map display 88
Repeating the last announcement 88
Changing the announcement volume 89
Map zooming 89
Moving the map 90
Map orientation 90
The Route overview 91
SituationScan 92
The detour assistant 92
The Park Assistant 92
The departure assistant 92
Map display options 93
Displaying the whole route 93
Move route 94
Selecting alternative routes 95
Change route options 96
Canceling route guidance 96
Entering/deleting a stopover 96
Blocking route temporarily 97
Setting day/night display 98
Displaying current position
(Where am I?) 98
Entering the destination 99
Skipping a destination 100
Supplementary functions for trucks and
mobile homes (selected models only) 101
Feedback after route calculation 101
Zooming in on the map 101
Warnings with planned route 101
Warnings without planned route 102
Show route 102
Display height profile 102
Telephone mode 104
Calling up the telephone mode
(only selected models) 104
Telephone menu
(only selected models) 105
Dialing a number 105
Phonebook 106
Call list 108
Icons used 108
Scrolling through the call list 108
Dialing an available number 109
Displaying or editing entries 109
Lists loaded from cell phone 109
Connecting Bluetooth telephones 110
Calling up a device list 110
Automatic connection 111
Searching for cell phones 111
Connecting from device lists 112
Connecting a mobile phone 112
Disconnecting a connected telephone 112
Telephone calls 113
Establishing a call 113
Accepting a call 113
Ending a call 114
During a call 114
Telephone settings 115
Bluetooth 116
Automatic connection 116
Automatic call acceptance 116
Telephone volume 116
Updating the phonebook 117
Bluetooth name 117
Tools 118
Travel Guide (model dependent) 118
Rear View camera 118
Displaying Rear view camera
(depending on the model) 118
Image viewer* 118
The image viewer menu 119
Selecting an image 119
Enlarging the image 120
Rotating the picture 120
Displaying image information 120
Slide show 121
Settings 121

5
CONTENTS >>>
Where am I? 121
Traffic forecast (depending on model) 121
Country information 122
Blocking a section of the road
permanently 123
Trip computer
(depending on model) 124
Settings 126
Selecting system settings 126
The system settings menu 126
Operation 126
Selection options 126
Closing the settings menu 126
The individual menu items 127
Battery 127
Automatic on/off 127
Day/night display 128
Brightness 128
Design by day 129
Design by night 129
Setting the colour 130
Language 130
Keyboard layout 131
Sounds 131
Rear view camera
(depending on the model) 131
Screen animations 131
Driver profiles (depending on model) 132
Renaming driver profile 132
Deleting driver profile 133
Driver profile Pro (model dependent) 133
Service information 134
Factory settings 134
Calibration (model dependent) 134
WiFi settings (model dependent) 135
Technical terminology 136
index 138
Model overview and technical
specifications 141
NOTICE 142
EU Declaration of Conformity 142
Disposal of the unit 143
Disposal of the battery 144
Duty to supply information according
to battery legislation (BattV) 144
Removing the battery 144
The information and data contained in
these documents are subject to change
without prior notice.
No part of these documents may be du-
plicated or transmitted for any purpose
whatsoever without express written per-
mission of United Navigation GmbH. All
technical information, drawings etc. are
subject to copyright law.
© Copyright 2014, United Navigation GmbH
All rights reserved.

6
>>> WARRANTY
24-month warranty
The company United Navigation GmbH,
Marco-Polo-Str. 1, 73760 Ostfildern,
Germany, provides a world-wide,
24-month warranty (battery: 6 months)
for BECKER units, beginning on the day
of delivery to the final customer (buyer).
Within the framework of the warranty,
functional defects will be eliminated
free-of-charge, provided that these can
be shown to be the result of material or
manufacturing faults and this shall be ef-
fected either by elimination of the fault or
by provision of a new unit, at the discre-
tion of the manufacturer. Warranty
claims must be registered by the buyer
immediately after defects are discovered
and must be accompanied by the initial
buyer’s purchase contract.
The warranty expires after 24 months
(battery: 6 months); neither warranty
claims nor fulfilment shall effect an ex-
tension of the warranty period.
Faults resulting from improper handling,
incorrect installation of the unit, improper
noise suppression of the vehicle, static
charge or mechanical damage are exclud-
ed from the warranty.
The warranty is invalidated in the case of
repairs or tampering on the part of the
buyer or unauthorised third parties.
Repairs may only be performed by per-
sons and service centres expressly au-
thorised by the manufacturer or by the
manufacturer himself.
This warranty does not affect or
restrict the legal warranty rights of
the buyer.
Warranty

7
SAFETY INSTRUCTIONS >>>
Safety instructions
¤Safety instructions
• Use of the device is only permitted if the traffic conditions are suitable and you are absolutely sure that its use presents
no risk, distraction or inconvenience to you, your passengers or other road users.
Traffic laws and regulations will apply in each and every case. Destinations may only be entered when the vehicle is
stationary.
• The navigation system is merely an aid, data/information may in select cases be incorrect. The driver must decide in each
situation by him- or herself if he or she will follow the directions. No liability will be assumed for incorrect directions
provided by the navigation system. Imprecise or incorrect directions may be provided due to changing traffic patterns or
deviations in data. Therefore, you must always observe the actual road signs and traffic regulations. In particular, the
navigation system must not be used as an orientation aid at times of poor visibility.
• The device must only be used for its intended purpose. The volume of the navigation system should be adjusted so that
noises external to the vehicle are still well audible.
• Turn the unit off immediately if a defect occurs (e.g. emission of smoke or odors).
• For reasons of safety and security, the device must only be opened by a professional. In case of needed repair please
consult your dealer.
• Navigation devices from Becker could contain magnets. Do not bring them near magnetic data carriers (notebooks) or
cards (EC cards, credit cards etc.). These could get damaged or be rendered unusable if brought into contact. Magnets can
impair the function of cardiac pacemakers! Persons with cardiac pacemakers should not carry the device to close to their
bodies.

8
>>> SAFETY INSTRUCTIONS
• It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter
and the product. In case of non-observance, the product or the charger may be damaged, or the battery may explode.
• Do not open the product or the battery under any circumstances. No modifications of the product are permitted, any such
modification leads to the loss of the operating permission.
• Only use original BECKER accessories. This way it is ensured that all relevant provisions will be met and that health risks
and damages to the product are avoided. Dispose of the used product or the battery according to the legal regulations in
effect.
• Improper use excludes all warranties! The safety instructions are also valid for any original BECKER accessories.
• Allowed temperature range: -20 °C – 60 °C storage / 0 °C – 45 °C operation

9
THE NAVIGATION DEVICE >>>
The Navigation device
Operating manual contents
This operating manual contains the
description of your Becker navigation
equipment.
This manual contains descriptions for
different model versions in a single
document. Therefore, some of the
functions described here might not be
available for your equipment under
certain circumstances.
All pictures are similar.
Use of the product
This product is a high performance PND
(Personal Navigation Device) for use in
vehicles. Protect the product and the
accessories from moisture and dirt.
Navigation
The use of the GPS = Global Positioning
system eliminates the tedious process
of looking in street maps.
The receiver antenna integrated into the
product allows constant access to the
navigation services outside buildings.
Within buildings, it is currently not
possible to access any navigation
functions. When using in vehicles, it
might not possible to receive sufficent
GPS data depending on the installation
position of the Navigation device.
Images*
The Navigation device has a Picture
Viewer with a lot of image display
functions.
*depending on model, must be activated via the Content Manager

10
>>> THE NAVIGATION DEVICE
Telephone (selected models)
Your Navigation device is equipped with
Bluetooth® wireless technology. Via
Bluetooth®, you may connect to a cell
phone equipped with Bluetooth®
wireless technology.
Your Navigation device can then be used
as a very comfortable hands-free unit.
You also have the option to read out the
address book or phonebook of the cell
phone and to read any received short
messages.
Unpacking the Navigation device
Checking the contents
Before you start using the Navigation
device, the scope and condition of the
contents must be thoroughly checked
(see also page 14).
>Unpack the contents carefully and
check them thoroughly.
Note:
Your Navigation device is delivered in a
stable packaging. If the packaging or its
contents show the signs of serious
damages, you must not continue to
unpack the product. In such case, please
contact your dealer.
Overview of functions
:standard
-:notavailable
:optional
Navigation system
active.5 CE
BE B00
active.5
BE B01
transit.5
BE B02
active.5
LMU plus
BE B10
active.6 CE
BE B30
active.6
LMU plus
BE B40
TMC 
Vehicleintegration ------
BeckerOneShotspeechcontrol ------
Speed camera warning 
Driver warnings - - ---
Telephone - - - -
Trip computer - - - -
Environmental zones 
Truck & Camper Navigation Pro - - ---
Trafficforecast ------
DriverprofilePro ------
Lane assistant Pro 3D 
Capacitivedisplay ------
Reversingcamera ------
Connectionforvehicleintegration------
BeckerLink2Live ------
LiveTraffic ------
LivePOISearch ------

11
THE NAVIGATION DEVICE >>>
Scope of delivery
Navigation device
Device console with carrier plate
(depending on model)
USB cable
Motor vehicle adapter power supply
12/24 V for cigarette lighters with
built-in TMC antenna (depending on
model)
In the case of devices with magnetic
holders, the carrier plate and car
adapter cable form one unit.
Complaints
In case of complaints, please consult
your dealer. The equipment may be sent
directly to United Navigation in its
original packaging.
Handling the packaging
Keep the original packaging in a dry
place, at least for the warranty period.
Description of the device
The navigation device consists of the
basic unit and the accessories included in
the scope of delivery.
For descriptions of the individual parts,
see:
• "Overview of the scope of Delivery" on
page 14
1
2
3
4
2
1
2
3
4
2
4
Note:
The disposal must be performed in a
professional manner, according to the
country-specific regulations. The
packaging must not be combusted.
Depending on the country of delivery, it
might be possible to return the
packaging to the dealer.
Note:
The basic unit and accessories must not
be opened or modified in any way.

12
>>> THE NAVIGATION DEVICE
The basic unit
The basic unit consists of the complete
electronic unit:
• Integrated antenna
• a TMC receiver for receiving traffic
messages (depending on the model),
•Touchscreen
• an integrated loudspeaker
• a microphone (dependingon the
model).
On the side of the unit, there are also
various connections and ports.
You will find more details of the unit
under:
• "Model overview and technical
specifications" on page 141
Cable for power supply from cigarette
lighter
This cable allows the unit to be connect-
ed up to the car's cigarette lighter.
The power supply must satisfy the
following requirements:
• DC current 12/24 volts
1 amps
Battery
When depleted, the integrated
rechargeable battery can be recharged
by connecting the Navigation device to
the power supply.
For this purpose, connect the unit via a
car power adapter to a 12/24 V socket in
a vehicle or via the optional mains power
supply unit to the 230 V mains.
USB connection cable
With the USB connection cable provided,
it is possible to connect the Navigation
device to a standard PC with a USB
interface. The integrated flash memory
of the navigation device and a micro SD
card that may eventually be inserted can
then be addressed by the PC like a
removable storage device.
Unit bracket
The Navigation device can be mounted in
the vehicle using the unit bracket.
Accessories
Mains power supply unit
This power supply allows connection of
the Navigation device to a mains outlet.
Note:
You can charge the Navigation device
via the car charger cable included in the
scope of delivery or via the optionally
available mains power supply unit.
When the Navigation device is
connected to a PC, it is supplied with
power via the PC and does not consume
battery power.
Note:
Switch the navigation device completely
off, see "Devices with magnetic holders"
on page 24, before connecting the navi-
gation device to the computer.

13
THE NAVIGATION DEVICE >>>
The power supply must satisfy the
following requirements:
• Alternating current 100-240 volts
50-60 Hertz
Cable for vehicle integration
(for certain models only)
With a 4-pin 3.5mm jack cable you can
integrate your Navigation device
seamlessly into your vehicle. Details of
the connection can be found under
"Cable for vehicle integration (depending
on model, optional)" on page 21.
Information about the
documentation
Quick Start Guide
The Quick Start Guide is designed to
provide a brief introduction to operating
your Navigation device. The most
important basic functions of the
Navigation device are explained in the
Quick Start Guide.
Operating instructions
A comprehensive explanation of the
Navigation device functionalities is
contained in these operating
instructions.
Registration
You can register your product using our
software service. We will then inform
you of any new updates and other news.
Registration is performed in the "Content
Manager" - see page 31.
Repairs
The unit must not be opened if damaged.
Please contact your dealer.
Emissions and disposal
You will find details on emissions and
electromagnetic compatibility and
disposal in "NOTICE" on page 142.

14
>>> OVERVIEW OF THE SCOPE OF DELIVERY
Overview of the scope of Delivery
Scope of delivery
1Basic device – PND (Personal Navigation Device)
2USB connection cable
3Unit holder with carrier plate (the design depending on the
model)
4Cable for power supply via the vehicle cigarette lighter
(12/24 Volt) with integrated TMC-antenna (depending
on the model)
In the case of devices with magnetic holders, the carrier plate
and car adapter cable form one unit.
1
2
3
43
2
4

15
OVERVIEW OF THE NAVIGATION DEVICE >>>
Overview of the navigation device
Front of unit with controls and displays
1Back button
Model dependent: either on the left bottom side of the
screen or in the left top corner of the housing.
Press = Back function in most applications
Press and hold = Open the main menu
2Touch screen showing the main menu selected
3Touch screen key
Press = activates the corresponding key command
4Microphone (depending on the model, sometimes in the
right top corner, too))
1
2
3
4

16
>>> OVERVIEW OF THE NAVIGATION DEVICE
Top of the unit
1ON/OFF switch
Underside of the unit
2Slot for Micro SD card
3Mini USB connection / connection for power supply
4Connection for reversing camera
5Connection for vehicle integration
1 2 345
Model dependent, the arrangement of the connections can differ on the bottom side of the device.
Top of the unit
1Standby switch (sleep mode)
Underside of the unit
2Slot for Micro SD card
3Mini USB connection / connection for power supply
4On/Off switch (I/O)
1 2 3 4
(model dependent)

17
GENERAL OPERATION >>>
General operation
Maintenance and care
The unit is maintenance-free.
For proper care, a commercially
available cleansing fluid for electrical
devices may be applied using a soft
damp cloth.
Your mobile navigation system was
designed and manufactured with great
care and should be treated with equal
care. You will enjoy your mobile naviga-
tion system for a long time to come if you
observe the recommendations listed in
the following:
• Protect your mobile navigation unit
and the accessories from water and
moisture. If your unit has been
exposed to moisture, switch it off
immediately and disconnect the power
supply. Allow to dry at room
temperature.
• Do not operate your mobile navigation
system in a dusty or dirty environment
and do not store it in such an
environment.
• Do not store your mobile navigation
system in hot environments. High
temperatures can shorten the service
life of electronic components in your
unit, damage the rechargeable
batteries and cause certain plastics to
warp or melt.
• Do not store your mobile navigation
system in cold environments. During
operation, when the unit warms up to
operating temperature, moisture may
form internally, causing damage to
electronic components.
• Do not drop your mobile navigation
system unit, protect it from shocks and
do not shake it. Improper handling can
damage components within the unit.
• Never use corrosive or aggressive
chemicals, cleaning solutions or
aggressive detergents for cleaning.
All the above information applies equally
to the mobile navigation system, the
rechargeable battery, the mains charg-
ing and car power adapters as well as all
accessories. Should one of these parts
not work properly, please contact your
authorised dealer.
¤Danger!
Danger to life by electrocution.
Always switch off the unit and
disconnect the mains power supply
unit before cleaning the unit, supplied
components, or accessories.
Note:
Do not use any aggressive or abrasive
substances or cloths which may
damage the surface.
A micro-fibre cloth is particularly
suitable for the display.
The unit must not be exposed to water.

18
>>> GENERAL OPERATION
Battery quality declaration
The capacity of the rechargeable battery
in your mobile navigation system
decreases with every charging/
discharging cycle. Improper storage at
excessively high or low temperatures
may also cause a gradual deterioration
of capacity. Consequently, the operating
time may be substantially reduced even
in the case of a fully charged battery.
Display quality declaration
In some cases, for technical reasons, a
few discoloured dots (pixels) may be
visible on the display. Some pixels may
also appear brighter or darker. However,
such instances do not represent a
product flaw.
Start-up
Once the Navigation device has been
unpacked and checked for damage, the
unit can be started up. The individual
start-up steps are:
• connect to power supply.
•switchingontheunit.
• ensuring antenna reception (if
navigation is desired)
Power supply
Note:
You can charge the Navigation device
via the car charger cable included in the
scope of delivery or via the optionally
available mains power supply unit.
When the Navigation device is connect-
ed to a PC, it is supplied with power via
the PC and does not consume battery
power.

19
GENERAL OPERATION >>>
Using the battery
The internal power supply is via the
integrated rechargeable battery. The
rechargeable battery is maintenance-
free and does not require any particular
care.
You are alerted by a warning message
when the battery should be recharged.
After the alert, the device can still be
used for approximately 10 minutes
before switching off automatically.
Connection for the cigarette lighter
Connect the power supply via the vehicle
battery and the cable provided for the
cigarette lighter as follows:
>Grasp the connector of the connection
cable and insert it gently without force
into the connector socket of the
navigation device up to the stop, or in
the case of a device with an active
cradle, on the underside of the
supporting plate. (Model dependent,
this step is not required on navigation
devices with magnetic holders)
>Insert the adapter into the cigarette
lighter.
Note:
Note that if the battery is completely
discharged, it may take up to a minute
before the device can be switched on
again.
Note:
In the event of a defective battery,
please contact your authorised dealer.
Please do not attempt to remove the
battery yourself.
Note:
If the cigarette lighter has recently been
used and is still hot, wait until the lighter
socket has cooled down.
Note:
When the engine is switched off, the
power supply slowly discharges the
vehicle battery via the cigarette lighter!
Do not therefore operate the Navigation
device for long periods with the engine
switched off.
To receive TMC messages (depending
on the model), the power supply must
be connected to the supporting plate in
the case of a device with an active
cradle.

20
>>> GENERAL OPERATION
Connection to the mains outlet
Connecting to power supply
Connection to the public mains grid is
achieved using the optionally available
mains power supply unit. Please
proceed as follows to connect to the
mains:
>Hold the connector and push it all the
way into the connecting socket in the
Navigation device without using
excessive force.
>Insert the plug of the power supply unit
into the socket.
TMC antenna (depending on the
model)
The supplied TMC antenna is integrated
into the cable for power supply.
The TMC antenna runs in parallel with
the the cigarette lighter cable in the
delivered condition.
If the TMC reception is poor, you must
remove the cable of the TMC antenna
from the cable for the cigarette lighter.
(Model dependent, the cable cannot be
disconnected on navigation devices with
magnetic holders)
GPS antenna
Unit antenna
The GPS antenna is integrated into the
housing.
¤Danger!
Make sure that your hands are not wet
and that the power supply unit is dry.
Only connect the power supply unit to
a permissible mains power supply.
Note:
Remove the power supply unit when
not using the Navigation device for
longer periods of time.
Note:
The TMC antenna must be installed in
such a way that it does not distract you
while driving.
Note:
The integrated GPS antenna is not
suitable for use in vehicles with anti-
glare windows (metalised thermo-
glass or metal foil, indicated by the
window label - SIGLA SOL, SIGLA
CHROM, SIGLA, KOOL-OF, SUNGATE,
etc.) and vehicles with fine-meshed
heating wires in the windows.