bedframes.com Queen/King/California King User manual

Queen/King/California King
Good & Better Bed Frame
Assembly Instructions
Instructions
Parts Included
• Bed Frame Rails - 4
• Nylon Glides - 6
• End Caps - 2
• Center Rail - 2
Step 1
Headboard Brackets
Swing out cross arms on side rails. Slotted
brackets should be at the head of the bed.
Step 3 Step 4
Slide end caps over the foot end of the side
rails.
• Bolts - 8
• Nuts - 8
• Cross Rail - 2
• Plug Locks - 4
Step 2
Overlap side rails and connect with bolt and
nut. Tighten with 7/16" wrench and a screw-
driver. Repeat on other side.
Slide glides over the legs on the center rail.

Find the keyholes on the cross arms needed for the appropriate size bed. See images below.
Step 5
FOR QUEEN SIZE BEDS
Insert rivets on cross rail into selected keyholes. Slide arms away from each other to lock the posi-
tion. Then insert plug lock into keyhole at the end of the overlap. Repeat on the other side of the bed.
Position center rails in the middle of the bed frame.
Overlap open ends of center rail and attach with bolt
and nut. Secure each end of center rail to bed frame
with bolt and nut. Tighten with wrench. Center rail can
be used for all sizes.
Step 6
FOR CALIFORNIA KING SIZE BEDS
FOR KING SIZE BEDS
Plug Lock
Copyright 2016 Bedframes.com
www.bedframes.com [phone] [e-mail]