bedframes.com Queen Best Bed Frame User manual

Queen/King/California King
Best Bed Frame Assembly
Instructions
Instructions
See king size on next page.
Parts Included
• Bed Frame Rails - 4
• Nylon Glides - 6
• Sockets - 6
• End Caps - 2
• Center Rail - 2
• Bolts - 8
• Nuts - 8
• Cross Rail - 2
• Plug Locks - 4
Step 1
Overlap side rails and connect with bolt and
nut. Tighten with wrench. Repeat on other
side.
Step 2
Slide leg covers on bed frame rails over inner
legs on cross rails.
Leg Cover
Bed Frame Rail
Cross Rail
Find the keyholes on the cross arms needed for the appropriate size bed. See images below.
Step 3
FOR QUEEN SIZE BEDS
FOR CALIFORNIA KING SIZE BEDS

Copyright 2016 Bedframes.com
www.bedframes.com [phone] [e-mail]
Insert rivets on extender rail into selected keyholes. Slide arms away from each other to lock the
position. Then insert plug lock into keyhole at the end of the overlap. Repeat on the other side of
the bed.
Position the center rails in the middle of the
bed frame. Overlap open ends of center rail
and attach with bolt and nut. Secure each
end of center rail to bed frame with bolt and
nut. Tighten with wrench. Center rail can be
used for all sizes.
Step 4
Step 3 continued
Plug Lock
Step 5
Insert plastic socket into legs on cross rails.
Insert glides into plastic sockets.
◄
Leg Socket
Step 6
Slide end caps over the foot end of the side rails. The caps are designed so each one fits one side
rail, the right side or the left side.
FOR KING SIZE BEDS