ROOMS TO GO 15402857 User manual

SKU:15403013
SKU:15403025
SKU:15403001
TOOLS REQUIRED:NO TOOLS REQUIRED
PART LIST
NO Description Sketch Quantity
A
C
Back 1
1
List of Parts
Body
B1
4
D1
RAF Wing
LAF Wing
EFoot
2
1
A
B
D
C
YOUZ E2877
STATIONARY LOVESEAT
SKU:15402857
SKU:15402869
Manufactured for Rooms To Go
SKU:15402845

Step1The sofa feet are stored inside dust cover.
Take them out and set them to be used later.
Step2Position the Back(A) with clips on over the mechanism
tab at rear of Body(B) as picture below. Ensure both clips on
back are aligned with tabs, then press top of back frame
downward until a clicking sound is heard.
3
Sofa Feet
Step3Slide metal insert on the wings(C/D) into
metal sleeve on back(A)until it is completely installed.
Seat Bottom
E
Step4Screw up sofa feet(E) clockwise.
B
Parts Assembly
4
X
Please keep the sofa at least 20″away from
heat producers, such as heating equipment and
radiator.
Please avoid placing the sofa under strong sun
or strong lamplight to remain its original color.
XX
X
Avoid jumping on the sofa and do not throw yourself violently onto the sofa.
Do not sit on the arms and/or the Back.
The frame inside your sofa will always remain intact and strong over time,
providing you comply with the following recommendations:
XX
Points For Attention
Please do not use solvents to clean the mental parts of the mechanism: a damp cloth is sufficient.
Please do not allow children to play with the Mechanism.
Please use the mechanism only when the person seats himself properly instead of sidewards or forwards.
Do not touch the mechanical parts.
Please do not continuously use the electric motor that control the reclining function of on-and-off over one minute. This action could cause
the motor to cut-off due to overheating. Allow the system to cool down for 5 minutes to restore the motor to correct working order.
Please remove the plug before cleaning the mechanism or performing other operations on it.
Please do not drag sofa on rough or smooth surface. If the sofa needs to be moved, it must be lifted up but not pushed.
Do not sit on the footrest when mechanism is open.
XXX
Maintain minimum of 6″space between the
furniture backs and wall.
6″
Do not leave when the recliner is not fully closed.
X
X
A
B
A
D
C
B

The sofa requires no special but normal maintenance, so does the padding material.
If your sofa is with fabric filler or down feather padding, you will need to shape its cushions carefully to make them restore to
their original shapes, because long way transportation will make the cushions out of shape.
In fact, the long journey which the sofa is subjected to before reaching your home could temporarily affect the sofa's initial
beauty.
Before shaping After shaping
Care and Cleaning
Spot Cleaning Fabric:
Do not
Do not
Do not
Dust often and use a vacuum cleaner to clean seams. To maintain the fabric appearance, gently clean
soiled areas with soft cloth dampened with water. Wipe with a clean, damp surface(do not rub).
Spot Cleaning Fabric: Blot any spills immediately; do not rub. Blot away the excess liquid with a clean, dry,
white cloth; turning the cloth frequently.
Do not use common household cleaners, solvents, or dry cleaning fluids on fabric furniture. These
cleaners may cause damage and color fading.
Do not use or place sharp objects on upholstered furniture.
Do not place furniture in direct sunlight and keep furniture at least 60cm/2 ft from heat sources to avoid
fading.
5
PROBLEM SOLUTION
Backrest Uneven
6
Ensure that installed and locked in position brackets are
installed( , )Step 23