Stevens Tot mate TM2134R User manual

1
#0964-3149
3594.TM2134/TM2135/TM2136.9/25/18
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.
CAUTION – CHOKING HAZARD
Adult assembly required due to presence
of small parts and sharp edges.
ATTENTION
Please unpack and assemble in an area away from children's activities. Remove all tools
and excess materials from work area after assembly of unit is complete. Dispose of pallet
and packaging materials in an environmentally friendly manner. If any parts are missing
or damaged, please call Stevens for immediate parts replacement (1-800-350-3270).
When ordering parts, give the Model Number and Color of the unit.
by Stevens Industries, Inc.
704 West Main St.
Teutopolis, IL 62467
P: 800.350.3270
P: 217-857-7100 • F: 217-857-7101
www.totmate.com
TM2134R
TM2135R
TM2136R NOTE: ASSEMBLY INSTRUCTIONS REFERENCE
ILLUSTRATIONS AND PART NUMBERS FOR THE TM2136R.
TM2134R
6" Activity Chair
076,QYHQWRU
\
3DUWV/LVW
3DUWV/LVW
3$5747<,7(0


;;

'(6&5,37,21
(QG/
(QG5
6HDW
6FUHZ&RQQ+['F1LPP[PP
TM2135R
8" Activity Chair
076,QYHQWRU
\
3DUWV/LVW
3DUWV/LVW
3$5747<,7(0


;;

'(6&5,37,21
(QG/
(QG5
6HDW
6FUHZ&RQQ+['F1LPP[PP
TM2136R
10" Activity Chair
076,QYHQWRU
\
3DUWV/LVW
3DUWV/LVW
3$5747<,7(0


;;
;;

'(6&5,37,21
(QG/
(QG5
5DLO
6HDW
6FUHZ&RQQ+['F1LPP[PP

TM2134R – TM2135R – TM2136R
STEP-BY-STEP ASSEMBLY
2#0964-3149
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM2134/TM2135/TM2136.9/25/18
ILLUSTRATIONS AND PART NUMBERS ARE FOR TM2136R.
BASIC ASSEMBLY INSTRUCTIONS ARE THE SAME FOR ALL 3 MODELS.
2-PERSON ASSEMBLY RECOMMENDED.
IMPORTANT!
Be sure to keep all parts supported during assembly to avoid damage.
Do not over-tighten screws or it will damage the pre-drilled holes;
snug fit is adequate.
HARDWARE / TOOLS INCLUDED
Confirmat Bolt (5)
(Screw Conn HxDc Ni 7mmx50mm)
Hex Wrench
076,QYHQWRU
\
3DUWV/LVW
3$5747<,7(0


;;
;;

'(6&5,37,21
(QG/
(QG5
5DLO
6HDW
6FUHZ&RQQ+['F1LPP[PP
3DUWV/LVW
TM2136R

TM2134R – TM2135R – TM2136R
STEP-BY-STEP ASSEMBLY
3
#0964-3149
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice.3594.TM2134/TM2135/TM2136.9/25/18
Lay Left End (1) flat on floor, with side having the
most holes facing up.
STEP
1
Insert dowels on both Seats (4) into holes on Left
End (1). Press firmly into place.
STEP
2
Position Right End (2) on top of assembly, making
sure dowels on Seats (4) and Rail (3) align with
holes in Right End (2). Press firmly into place.
STEP
4
Secure Right End (2) to Seats (4) and Rail (3)
with five Confirmat Bolts (5), using the included
Hex Wrench.
STEP
5
Carefully turn unit over, so Left End (1) is facing
up.
STEP
6
Insert dowel on Rail (3) into remaining hole on
Left End (1), making sure hole on Rail (3) is
aligned with thru-hole on Left End (1). Press firmly
into place.
STEP
3
thru-hole
(NOTE: TM2134R and TM2135R have no Rail. Skip to
STEP 4 for those models and disregard references
to the Rail.)

TM2134R – TM2135R – TM2136R
STEP-BY-STEP ASSEMBLY
4#0964-3149
©2018 Stevens Industries, Inc.
Due to continuing product development, Stevens reserves the right to change specifications without notice. 3594.TM2134/TM2135/TM2136.9/25/18
Repeat Step 5 to secure Left End (1) to Seats (4)
and Rail (3).
STEP
7
Carefully stand unit upright.
STEP
8
Ensure that all joints and bolts are tight.
STEP
9
This completes the assembly.