Behringer EUROPOWER PMH1000 User manual

Version 1.3 November 2004
Technical Specifications
ENGLISH
EUROPOWER
PMH1000

2
EUROPOWER PMH1000
PMH1000
EUROPOWER
Ultra-Compact 400-Watt 12-Channel Powered Mixer with 24-Bit Multi-FX Processor
and FBQ Feedback Detection System
VSuper-compact400-Wattstereopoweredmixer
VRevolutionary COOLAUDIOAmplifier Technology: Enormous power, incredible sonic performance and
super-lightweight
VUltra-compactdimensionsatnearlyhalftheweightof conventionalpoweredmixersmeansnomorelugging
arounddeadweight
V12-channel mixer section comprised of 4 mono and 4 stereo channels, 2 additional stereo inputs plus
separatetapereturns
VIntegrated24-bitstereoFXprocessorwith99outstandingVIRTUALIZERpresetsincludingreverb,delay,
chorus,flangerandmore
VRevolutionary FBQ Feedback Detection System instantly reveals critical frequencies for easy feedback
removal
V6 high-quality mic preamps (4 IMP “Invisible” Mic Preamps) with switchable +48 V phantom power for
condensermicrophones
VEffective, extremely musical 3-band EQ, switchable low cut filter and clip LEDs on all mono channels
VStereo7-bandgraphic EQ allows precise frequency correction ofmonitoror main outputs
VVoiceCancellerfunctionremovessinger’svoicefromrecordingsforKaraokeapplications
VSelectablestereo(mainL/R),doublemono(main/monitor)orbridgedmonoamplifieroperationmode
VStandbyswitchmutesallmicchannelsduring breaks while background music is provided via tape inputs
VBreathtakingXPQ3Dstereosurroundeffectformorevitalityandenhancedstereoimage
VAdjustablestereoCD/tape input for connecting external signalsources
VMulti-functionalstereopreampoutputsforaddedflexibility
VInternal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior
transientresponseandlowest possible power consumption
VExtremelyruggedconstructionensures long life even under the most demanding conditions
VConceivedanddesignedbyBEHRINGERGermany

3
EUROPOWER PMH1000
SPECIFICATIONS
PMH1000
Type XLR, electronically balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ωsource resistance -134 dB / 136 dB A-weighted
@ 50 Ωsource resistance -131.5 dB / 134 dB A-weighted
@ 150 Ωsource resistance -129 dB / 131 dB A-weighted
< 10 Hz - 155 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +10 dB, +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩbalanced / 1.3 kΩ unbalanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted (0 dBu In @ +10 dB gain)
Noise (THD + N) 0.002% / 0.0018% A-weighted
Type 1/4" TS connectors, balanced
Impedance approx. 20 kΩ, balanced
Max. input level +21 dBu
Type 1/4" TRS connectors, unbalanced
Impedance > 3.6 kΩ
Max. input level +22 dBu
Low 80 Hz / +/-15 dB
Mid 2.5 kHz / +/-15 dB
High 12 kHz / +/-15 dB
Type RCA
Impedance approx. 3.6 kΩ, balanced
Max. input level +21 dBu
MAIN Type 1/4" TRS connectors, unbalanced
Impedance approx. 150 Ω, unbalanced
Max. output level +21 dBu
MONITOR
Type 1/4" TRS connectors, unbalanced
Impedance approx. 150 Ω, unbalanced
Max. output level +21 dBu
Type RCA
Impedance approx. 1 kΩ
Max. input level +21 dBu
Noise MAIN MIX @ -oo -102 dB/-106 dB A-weighted
Channel fader -oo
MAIN MIX @ 0 dB -88 dB/-91 dB A-weighted
Channel fader -oo
MAIN MIX @ 0 dB -84 dB/-86 dB A-weighted
Channel fader @ 0 dB
MICROPHONE INPUTS
MONO LINE INPUTS
STEREO LINE INPUTS
EQUALIZER
Frequency response
CD/TAPE INPUT
PREAMP OUTPUTS
STEREO OUTPUTS
MAIN MIX SYSTEM DATA

4
EUROPOWER PMH1000
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of
printing. NEUTRIK®SPEAKON® as well as the names of companies, institutions or publications pictured or mentioned and their
respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by
BEHRINGER®nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER®accepts no liability for any loss which may be
suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours
and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are
not agents of BEHRINGER®and have absolutely no authority to bind BEHRINGER®by any express or implied undertaking or
representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle
StudiotechnikGmbH. BEHRINGER®isa registered trademark.
ALLRIGHTSRESERVED.© 2004 BEHRINGERSpezielleStudiotechnikGmbH.
BEHRINGERSpezielle StudiotechnikGmbH,Hanns-Martin-Schleyer-Str. 36-38,
47877 Willich-Münchheide II, Germany
Tel. [phone], Fax [phone]
BEHRINGERisconstantlystrivingtomaintainthehighestprofessionalstandards.Asaresultoftheseefforts,modificationsmaybemadefromtimetotimetoexistingproductswithoutpriornotice.
Specificationsandappearance may differfromthoselistedor illustrated.
Type Compatible with NEUTRIK®SPEAKON®
Load impedance
MAIN L/R 4 - 8 Ω
MONITOR/MAIN MONO 4 - 8 Ω
MAIN MONO/MAIN MONO 4 - 8 Ω
BRIDGE 8 - 16 Ω
Converter 24-bit Delta-Sigma, 64/128-times oversampling
Dynamics D/A 90 dB
Sampling rate 46.875 kHz
Delay Time max. 5 secs
Signalrun time (Line In > Line Out) approx. 1.5 msecs
Type Dual 7-segment LED
Power amp output
Pow er @ 4 Ω2 x 200 W
Pow er @ 8 Ω(BRIDGE) 1 x 400 W
Mains voltage 100 - 240 V~, 50 / 60 Hz
Pow er consumption 500 W
Fuse T 5A H250V
Mains connector IECstandard receptacle
4 7/8" x 15 3/8" x 16 3/4"
122 x 390 x 425 mm
17.64 lb
8 kg
LOUDSPEAKER OUTPUTS
DSP
Dimensions (Hx W x D)
Weight
AMPLIFIER
POWER SUPPLY
DISPLAY
DIM ENSIONS/WEIGHT