Beko DSN15420X User manual

Dishwasher
Manual
FR
Document Number: 15 9753 0300_AA_BEKO_A5_FR/ 16-01-18.(8:52)
Translated from French to English - www.onlinedoctranslator.com

Before you start, please read this user manual!
Dear Customer,
We hope you will get the best results from our product which is made using
the advanced technologies and top quality materials. We therefore
recommend that before using this product, you carefully read this manual
and all the other documents supplied and keep them carefully for future
reference. If you give the product to someone else, remember to also give
them the user manual. Be sure to follow the guidelines and instructions in
the user manual.
Remember that this user manual also corresponds to several other models.
This manual marks the differences between the models.
Explanation of symbols
Throughout this User Manual, the following symbols will be used:
VSImportant information or
useful tips for use
ATWarning of hazardous
situations
in terms of the safety of
people and property
BWarning in case of
electric shock
The product packaging is made
from recyclable materials, in
accordance with our
National environmental
regulations.
Do not dispose of the packaging elements with household waste and other waste.
Drop them off at one of the packaging collection points indicated by the local
authority on which you depend.
This product has been manufactured in accordance with the latest ecological conditions.

Dishwasher
Manual
FR
Document Number: 15 9753 0300_AA_BEKO_A5_FR/ 16-01-18.(8:52)

Before you start, please read this user manual!
Dear Customer,
We hope you will get the best results from our product which is made using
the advanced technologies and top quality materials. We therefore
recommend that before using this product, you carefully read this manual
and all the other documents supplied and keep them carefully for future
reference. If you give the product to someone else, remember to also give
them the user manual. Be sure to follow the guidelines and instructions in
the user manual.
Remember that this user manual also corresponds to several other models.
This manual marks the differences between the models.
Explanation of symbols
Throughout this User Manual, the following symbols will be used:
VSImportant information or
useful tips for use
ATWarning of hazardous
situations
in terms of the safety of
people and property
BWarning in case of
electric shock
The product packaging is made
from recyclable materials, in
accordance with our
National environmental
regulations.
Do not dispose of the packaging elements with household waste and other waste.
Drop them off at one of the packaging collection points indicated by the local
authority on which you depend.
This product has been manufactured in accordance with the latest ecological conditions.

TABLE OF CONTENTS
1 RELATED INSTRUCTIONS
TO SAFETY AND THE
ENVIRONMENT
Special Lens Support .................................................. .. 23
Retractable Stemware Holder .................................. 23
Lower rack multi-function/adjustable height
support .............................................. ................................ 24
Lower Rack Bottle Stem ...................................... 25
Height-adjustable upper rack support .............. 25
Multi-function upper rack support .............. 25
Adjusting the height of the upper basket .............. 26
Upper Rack Retractable Rods............................... 27
Adjusting the height of the empty basket .............. 27
Upper cutlery basket ........................................... 28
Upper cutlery basket ........................................... 28
4
General safety ................................................ ........... 4
Intended use ................................................ ............5
Child safety .................................................. .......5
Disposal of packaging materials ............................5
Transporting the device ............................................ ...... 6
Compliance with the WEEE Directive and disposal of
waste from the device ........................................... 6
Compliance with the RoHS Directive ............................... 6
Description of packaging ................................ 6
5 OPERATION OF
THE DEVICE
2 DISHWASHERS 729
Presentation ................................................. ...................7
Fan Drying System ............................................ 8
Technical Specifications ................................................ 8
Keys ................................................ ........................ 29
Preparing the device ............................................... 29
Selecting programs ................................................ 29
Additional functions ................................................ 31
Programming the washing time ............................ 31
Starting the program ................................................ 32
Program Progress Tracking ...................................... 33
Canceling the program ................................................ 33
Salt indicator ................................................ ............. 33
Rinse aid indicator ...................................... 33
Adjusting the amount of rinse aid ............... 33
End of the program .................................................. ..........34
3 INSTALLATION 9
Appropriate installation location ........................... 9
Connecting the water supply ................................... 9
Adjusting the feet ................................................ ......... 10
Aquasafe+................................................. ..................... 11
Electrical connection ................................................ 11
First use ................................................ ..... 12
4 PREPARATION 13
Tips for saving energy ....................................... 13
Water softening system ................................... 13
Adjusting the water softening system.............. 13
Adding salt ................................................ ..................... 15
Detergent ................................................ ...................... 16
Tablet detergents ............................................... 17
Rinse aid ............................................... .......... 18
Items not to be washed in the dishwasher............... 19
Arranging the dishes in the dishwasher.............. 19
Cutlery basket ............................................... .......... 21
Cutlery basket ............................................... .......... 21
Lower Rack Retractable Rods .................................. 22
Lower Rack Retractable Rods .................................. 22
Drip pan support................................................ ....... 23
6 CARE AND CLEANING 35
Washing the outer surface of the product.............. 35
Washing the inside of the appliance............................... 35
Cleaning the filters............................................... ..... 35
Cleaning the Hose Filter ...................................... 36
Cleaning the propellers............................................... ... 37
Lower propeller ................................................ ........... 37
Upper propeller ................................................ ........ 37
7 TROUBLESHOOTING 38

1Safety and environmental guidelines
This section contains safety
instructions that help guard
against the risk of personal
injury or property damage.
Failure to comply with these
instructions voids all
warranties.
• Unplug the device when
not in use.
• Never wash the appliance by
spilling or pouring water on it!
You will expose yourself to the
risk of electric shock!
• Never touch the plug with
wet hands! Never unplug
the appliance by pulling on
the cable, always grasp the
plug for the
unplug.
• The product must be unplugged
during the procedures
installation, maintenance,
servicing, and repair.
• Always use authorized
service for all installation
and repair procedures.
The manufacturer's
liability cannot
liable for damage caused
by repairs carried out by
unauthorized persons.
• Never use chemical
solvents inside
the device. They carry a
risk of explosion.
When you shoot
the upper and lower baskets
completely, the appliance door
supports the entire weight of the
baskets. Do not put other loads
on the door, otherwise the
appliance may tip over.
• Never leave the
appliance door open,
except during loading
and unloading.
Do not open the appliance
door when it is running,
General Safety
• Never install the appliance on
a floor covered with
carpet. Otherwise, lack of
air circulation underneath
your appliance will cause
electrical parts to
overheat. This can
damage your device.
• Do not operate the
device if the cable
supply or plug is
damaged. Contact the
Authorized Service Agent.
• Connect the device to a
ground line protected
by a fuse meeting the
criteria presented in
the “Technical
characteristics” table.
Don't forget to ask a
qualified electrician to perform
the grounding installation. Our
company will not be held
responsible for damages
occurring following the use of
the device without an
installation of
grounding in accordance
with local regulations.
• The water supply and
drain pipes must
be securely fastened and remain in
good condition.
•
•
4 /44 EN Dishwasher / Instructions for use

Safety and environmental guidelines
except when necessary. Pay
attention to the rush of hot
steam when you have to
open the door.
sensory or mental skills
are reduced or lack
sufficient experience or
knowledge if a person in
charge of safety
supervises them or
teaches them to use the
product safely and with
awareness of the dangers
related thereto. Children
should not play with the
device. Cleaning and
maintenance of the
appliance should not be
carried out by children
without supervision.
Intended use
• This appliance has been
designed for household use.
• It should only be used
for household type
dishes.
• This device has been
manufactured to be used as
both in domestic
applications and in those
similar to it, namely:
- staff kitchens in shops,
offices and other working
environments;
- country houses;
- customers in hotels, motels
and other residential type
environments;
- bed and breakfast type
environments.
• Only safe dishwasher
detergents, rinse aids and
additives may be used.
• The manufacturer
declines all
responsibility for any
problem arising from
incorrect use or
transport of the device.
• Genuine spare parts are
available for
10 years from the date of
purchase of the product
• This appliance can be used
by children 8 years of age
and over and people whose
physical abilities,
Child Safety
•Electrical appliances are
dangerous for children.
Keep them away from the
machine when it is
running. Do not let them
play near the machine.
• Remember to close the
loading door when leaving
the machine room.
• Store all detergents and
additives carefully,
out of reach of children.
Disposal
materials
packing
The packaging materials are
dangerous for children.
Keep all packing materials
in a safe place, out of the
reach of children.
The packaging materials for your
product are manufactured in
Dishwasher / Instructions for use 5 / 44 EN

Safety and environmental guidelines
from recyclable materials.
Dispose of them properly and
sort them according to the
waste recycling instructions.
Do not dispose of these
materials with normal
household waste.
recycling. At the end of its life,
do not dispose of it with
household waste. On the
contrary, have it disposed of at a
collection point reserved for the
recycling of appliances
electrical and electronic.
Please contact your local
authorities to
Find out about collection
points in your area.
Transporting the device
ATIf you need to move the
device, place it in a
vertical position and
hold it by the sides.
Tilting the product
forward may wet
its components
electronics and
cause damage.
Compliance with
RoHS directive
The device you have purchased
complies with the European
Parliament RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited
materials, as specified in the said
Directive.
1. Unplug the product before
transporting it.
2. Remove the water inlet
and drain connections. Description of
conditioning
3. Completely drain the remaining
water from the unit. Product packaging is made
from recyclable materials in
accordance with our
National Environmental
Regulations.
Do not dispose of the
packaging elements with
household waste and other
waste. Put them in one of the
collection points for packaging
elements indicated to you by the
local authority on which you
depend.
Compliance with
WEEE Directive and
disposal of waste from
the device
This product complies with
the WEEE Directive of the
European Parliament
(2012/19/EU). This
device bears a classification
symbol for Waste Electrical
and Electronic Equipment
(WEEE). It was made with top
quality parts and materials,
reusable and suitable for the
6 /44 EN Dishwasher / Instructions for use

2Dishwasher
Presentation
1. Upper basket
2. Upper helix
3. Lower propeller
4. Cutlery basket
5. Door
6. Rating label
7. Control panel
8. Detergent dispenser
9. Lower basket
10. Filters
11. Salt reservoir cover
12. Upper rack rail
13. Upper cutlery basket (varies by model)
14. Tabletop (varies by model)
15. Ventilation drying system (depending on the
model)
15
Dishwasher / Instructions for use 7 / 44 EN

Dishwasher
Technical specifications
Compliance with standards and test data / EC Declaration of Conformity
This product complies with the following EU directives:
The stages of design, production and sale of this product are in compliance with
the safety rules of all European Union regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power circuit 220-240 V, 50 Hz (see rating
label)
Total energy consumption 1800-2100 W (see rating label)
Heating electricity consumption 1800 W (see type label)
Total intensity (varies by model) 10 A (see type label)
Drain electricity consumption 30 W (see type label)
water pressure 0.3 –10 bar (= 3 – 100 N/cm² = 0.01-1.0
Mpa)
VSTechnical details may be changed without notice to improve product
quality.
VSThe figures in the manual are schematic and may not correspond exactly
to the product.
VSThe values presented on the product labels or in the documentation supplied with
the product, have been obtained in the laboratory by applying the corresponding
standards. These values may change depending on the operating conditions and
environment of the product.
Fan drying system
(depending on the model)
The fan drying system ensures efficient drying of your dishes. It is normal
to hear noise other than the wash cycle during fan operation.
Notes for survey establishments:
Data required for performance testing can be provided upon request. Requests
can be sent to the following address:
[email protected]
Do not forget to indicate the product code, stock and serial numbers of the product to be
tested in your email, as well as your contact details. Product code, stock and serial
numbers are provided on the label affixed to the side of the door.
8 /44 EN Dishwasher / Instructions for use

3Installation
Consult the nearest Authorized Service
Agent for installation of your product.
To make your machine ready for use,
please check that the electricity,
drainage and water supply system are
adequate before calling an authorized
service. If not, contact a qualified
technician and plumber to have the
arrangements
necessary are carried out.
Suitable installation location
•Place the product on solid, level ground
with sufficient load-bearing capacity!.
The appliance must be installed on a flat
surface so that the door can be closed
easily and securely.
•Avoid installing the product in places
where the temperature is likely to
drop below 0ºC.
•Place the product at least 1 cm away from
other furniture.
•Install the product on solid ground.
Do not place it on carpet or similar
surfaces.
VSThe preparation of the
location as well as the
electrical, water tap and waste
water installations at the
installation site are the
responsibility of the customer.
BBDo not install the product on
the power cable.
The installation and the
electrical connections to the
appliance must be made by the
authorized service agent.
The manufacturer will not
be held liable for damage
resulting from processes
carried out by
unauthorized persons.
•Be sure to choose a location that
will allow you to charge and
unload the dishes in a fast and
comfortable way.
•Install the product in a location close to
the tap and drain pipe Choose the
location considering that it cannot be
changed once the connections have
been made.
ATBefore proceeding with the
installation, check whether
the product has any defects. If
so, don't have it installed.
Damaged products pose risks
to your safety.
Connecting the water
supply
VSWe recommend fitting a
filter to the house/
apartment water inlet to
protect the machine from
damage that may be
caused by impurities
(sand, dust, rust, etc.)
coming from the system
city water supply or your
own water system, as well
as to prevent problems
such as yellowing or soil
buildup at the end of the
wash.
VSCheck that the water inlet
and drain hoses are not
kinked, pinched, or crushed
when replacing the product
after installation or cleaning
procedures.
When placing the appliance, be careful
not to damage the floor, walls, piping,
etc. Avoid moving the appliance by
holding it by the door or the panel.
Dishwasher / Instructions for use 9 / 44 EN

Installation
Permissible water temperature:
up to 25°C
It is not recommended to connect
the dishwasher to open water
heaters or continuous flow water
heaters.
•Do not use an old or used water
inlet hose on your new product. Use
the new water inlet hose supplied
with the product.
•Connect the water inlet hose directly
to the water tap. The pressure
coming from the valve must be at
least 0.3 and at most 10 bars. If the
water pressure is higher than 10
bar, a pressure reducer must be
fitted between the two.
•Fully open the taps after making
the connections to check for water
leaks.
connection must be at least 50 cm and at
most 100 cm from the ground. A drain
hose longer than 4 meters may cause
faulty washing.
Attach the water drain hose to the
drain hose without bending it.
Secure the drain hose to the drain
hose tightly to prevent the drain
hose from moving during product
operation.
VSUse a hose connector wrench
to connect the water inlet hose
to the water faucet with a 3/4
foot outside wire. If necessary,
use a filter to filter the residue
from the pipes. VSThe drain hose must be
connected to the sewer and
must not be connected to
surface water.
Leg adjustment
If the product door cannot be closed
tightly or the product rocks when you
push it lightly, you need to adjust its
feet. Adjust the feet of the product as
shown in the installation manual
supplied with the product.
ATFor your safety, completely
close the water inlet tap
after the end of the washing
programme. ATThe dishwasher door must
be properly aligned to
prevent hot steam from
escaping! Risk of severe
burns, other types of
injury or damage to
furniture.
Connecting the drain pipe The water
drain pipe can be connected directly
to the drain pipe or to the sink drain.
The length of this
10 /44 EN Dishwasher / Instructions for use
max 1000
mins 5 00
min 120
min 300

Installation
Aquasafe+ •The power cable socket must
be easily accessible after
installation.
(depending on the model)
Protect the Aquasafe+ system against
water leaks that may occur at the inlet of
the hose. Water contact with the system
valve housing should be avoided.
Otherwise, the electrical system will be
damaged. If the Aquasafe+ system is
damaged, unplug the unit and call your
authorized agent.
BUnplug the appliance after the end
of the washing programme.
•The permitted voltage and
protection of the fuse or circuit
breaker are specified in the
“Technical data” section. If the
current rating of your home fuse
or circuit breaker is less than 16
amps, have a qualified electrician
install a 16 amp fuse.
•The voltage specified must be equal to
that of your electrical network.
•Do not make connections using
extension cords or multiple
sockets.
ATAs the entire hose contains
electrical connections and
parts, you should not shorten
or lengthen the hose with
extension cords.
BDamaged power cables
must be replaced by the
Authorized Service.
BIf your dishwasher has an
internal light, have the bulb
replaced only by an
Authorized Service Agent in
the event of any faults
involving the bulb.
Electrical connection
Connect the device to a ground line
protected by a fuse meeting the criteria
presented in the “Technical
characteristics” table. Our company will
not be held responsible for any damage
caused by using the device without an
earthing installation in accordance with
the local regulations in force.
•The connection must comply with
the regulations in force in your
country.
BIf the product encounters a
problem, do not use it unless it
has been repaired by the
authorized service agent! You
will expose yourself to the risk of
electric shock!
Dishwasher / Instructions for use 11/44 EN

Installation
First use
Before you start using your device, make
sure that all preparations have been
made in accordance with the instructions
given in the "Important safety
instructions" and "Installation" sections.
•To prepare the appliance for
washing, first run it empty on the
shortest program with detergent.
For the first use, fill the salt
reservoir with 1 liter of water
before filling it with salt.
ATA small amount of water
may remain in the unit after
factory quality control
testing. This poses no
danger to the device.
12 /44 EN Dishwasher / Instructions for use

4Preperation
Tips for saving energy System setting
water softening
The following information will help you use the
product in an environmentally friendly and
energy efficient way.
Remove all caked on food residue from
the dishes before placing them in the
appliance.
Operate the product after filling it
completely.
When selecting a programme, consult
the table of “Programme data and
average consumption values”.
Do not add more detergent than
suggested on the detergent package.
The cleaning, rinsing and drying
performance of your dishwasher
increases when the water softening
system is properly adjusted.
Set the new water hardness level
following the hardness instructions
provided in this manual.
Use the test strip supplied with the
product, following the steps given
below, to determine the water
hardness level.
Water softening system
The product is equipped with a water softening
system which reduces the hardness of incoming
water. This system softens the water entering the
appliance to a level that will allow the dishes to be
washed at the required quality.
VSThe hardness of the water in
your supply must be softened
if it is above 7° dH. Otherwise,
the hardness-causing ions
will accumulate on the dishes
and may decrease the
washing, rinsing and drying
performance of the machine.
Dishwasher / Instructions for use 13/44 EN

Preperation
remove the
strip
sound test
packaging.
Open the faucet
of water and let
sink about one
minute.
maintain the
test strip
in the water for
about one
second.
remove the
test strip
of water and shake.
Wait a
minute.
The strip
trial shows you
the level of hardness.
After determining the water hardness level:
1. When the program selection knob is in the “Off” position, press and hold the
Start/Pause/Cancel button and turn the program selection knob to the “1”
position within 5 seconds. After this time, the machine will go into regeneration
setting mode.
2. The regeneration level inside the memory lights up for 5 seconds once the
regenerator setting mode is activated.
3. To adjust the water hardness level, move the program selection button to the
position suitable for your hydraulic network. (see the “Water hardness level setting
table”
4. Press the Play/Pause/Cancel button once to save the level you have selected.
The machine returns to normal operating mode once the new setting has been
saved.
* Program selection knob rotates in 5 increments, independent of machine
programs.
5. Press the “Start/Pause/Cancel” button once to save the level you have
selected.
Water hardness level setting table
Level of
hardness
English degree
hardness of
water °dE
German degree
hardness of
water °dH
French degree
hardness of
water °dF
Location of
button
selection of
program*
Witness of water hardness level
Level 0 0-5 0-4 0-8 1
First
level
The panel wash light comes on.
6-9 5-7 9-13 1
Second
level 10-15 8-12 14-22 2The panel drying light comes on.
Third
level 16-19 13-15 23-27 3The end indicator of the panel lights up.
Fourth
level 20-24 16-19 28-34 4The washing, drying and end indicators
light up on the panel.
Fifth
level
The washing, drying and end indicators
flash at one second intervals on the
panel.
25-62 20-50 35-90 5
If the water hardness level is above 90°dF or if you use well water, it is
recommended to use special water purification devices and filters.
If the hardness level of the water you are using is below 13°dF, you do not have to
14 /44 EN Dishwasher / Instructions for use

Preperation
use salts in your dishwasher. In this
case, the “no salt indicator” (if fitted)
lights up continuously on the machine
panel.
If the water hardness level is set to
level 1, the “No salt indicator” will light
up continuously even if no salts are
needed. If you use salts in this case,
the salt will not be used and the salt
indicator will not light up.
VSThe salt reservoir fills with
water when you start the
appliance. Therefore, add
salt before using the
machine.
1. Start by taking out the lower basket
VSIf you move, it is necessary to
readjust the water hardness
level of the appliance taking into
account the
information provided above,
according to the water
hardness level of your new
home. Your machine will
display the last hardness level
setting. 3. Add 1 liter of water to the salt
reservoir of the device only when
using it for the first time.
Adding salt
The water softening system needs to
be regenerated so that the app always
provides the same performance
Dishwasher salt is used for this
VSUse only softening salts
intended specifically for
the dishwasher
VSIt is recommended to use
softening salts formed
granules or powders in the
water softening system. Do
not use salts that do not
dissolve completely in
water such as salt or coarse
salt in the appliance you do,
the performance of the
system may deteriorate
over time.
Dishwasher / Instructions for use 15/44 EN

Preperation
VS Adding detergent
You can pour about 2 kg of
softening salt into the salt
reservoir. VSCarefully read the
warnings on the detergent
package for best washing
and drying results. Contact
the detergent
manufacturer for
5. Replace the lid and screw it tight
when the tank is full.
VSIt is necessary to add salt just
before switching on the
appliance. Therefore, the
excess salt water will be
drained immediately, thus
preventing any risk of
corrosion of the device. If you
do not want to start washing
immediately, run the
appliance empty with the
shortest programme.
other questions.
ATDo not put solvents in the
detergent dispenser. There
is a risk of explosion!
Place detergent in the detergent
dispenser just before turning on the
machine as shown below.
1. Push the lever to the right to open the
detergent dispenser cover (A).
VSDifferent brands of salt on
the market have different
particle sizes and the
water hardness may vary.
Dissolving the salt in the water
can therefore take several
hours. The Salt light may stay on
for a while after adding salt to
the appliance.
2. Put the recommended amount of
powder, liquid/gel or tablet detergent
into the tank.
Detergent VSThe detergent dispenser
contains level indicators to
help you use the correct
amount of powder
detergent. When full, the
detergent dispenser can
hold 45cc of detergent. Fill
the detergent dispenser
up to the 15 cm³ or 25 cm³
level depending on how full
the machine is and/or how
dirty the dishes are. One
tablet is enough if you use
tablet detergent.
You can use powder, liquid/gel or
tablet detergent in the machine.
ATUse only
detergents designed
especially for dishwashers.
We advise you not to use
detergents containing
chlorine and
phosphate insofar as these
agents are harmful to the
environment.
16 /44 EN Dishwasher / Instructions for use

Tablet detergents
In addition to conventional tablet
detergents, there are also tablet
detergents on the market which have the
effect of a regenerating salt and/or a
rinse aid. Some types of these detergents
contain special components like stainless
steel or glass protectors. These tablets
show their effectiveness up to a certain
degree of water hardness (21° dH).
Regenerating salt and rinse aid should
also be used with the detergent if the
water hardness level is above the level
mentioned.
3. Push the detergent dispenser
cover to close it. A You will hear
a “click” when the
lid will be closed.
1VSThe best washing results in
the dishwasher are
obtained by separately using a
detergent, a product of
2
3
VSFollow the detergent
manufacturer's instructions
on the package when using
tablet detergents.
VSUse the powder or liquid/
gel detergent in short
programs without
pre-wash, as the solubility of
tablet detergent changes
with temperature and time. VSContact the detergent
manufacturer if your
dishes are wet and/or if
you notice deposits
limescale, especially on
glasses, after washing with
tablet detergent.
Dishwasher / Instructions for use 17/44 EN

Preperation
Changing from powder detergent
to tablet detergent:
1. Check that the salt and rinse aid
reservoirs are full.
2. Set the water hardness to its
maximum level and run the machine
empty.
3. After the empty wash cycle, read the
user manual and adjust the water
hardness level according to the water
supplied to you.
3. Lightly press point (B) on the tank
lid to close it.
4. Make the appropriate flush
settings.
Rinse aid
VSThe rinse aid used in
dishwashers is a special
formula used to improve
drying efficiency and
prevent streaks from
limestone on the washed
elements. Therefore, be
sure to use rinse aid in the
rinse aid container and
rinse aids made specifically
for dishwashers.
4. If there are stains on the cutlery after
washing, the level should be
increased, and if you observe a blue
trace after wiping it by hand, it
should be decreased. It is set to level
3 as factory setting.
VSAdjusting the rinse aid is
described in the section
"Adjusting the amount of
rinse aid" in the machine
operation section.
1. Open the lid of the rinse aid
container using the lever.
VSWipe the rinse aid that has
overflowed out of the tank.
Rinse aid that has
accidentally overflowed will
cause foaming and possibly
decrease washing
performance.
2. Fill the reservoir to the “MAX” level.
18 /44 EN Dishwasher / Instructions for use