DISHWASHER
Caution
- Do not forget that repairs should be carried out by a qualified specialist. Improper repairs can lead to considerable equipment
damage, as well as danger to the user.
- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.
Switch off at the mains socket and water supply and remove the plug.
If the dishwasher won't
start, check...
■Isthedishwasherpluggedinatthe
electricitysocketandswitchedon?
■Isthereapowerfailure,checkother
appliances.
■Checkthefuse.
■Isthewatersupplytapturnedon?
■Isthewaterinlethoseconnected
properly?
■Isthepressureofthewatersupply
sufficient?
■Istheinlethosekinked?
■Isthefilteronthewatersupplyhose
blocked?
■Isthedishwasherdoornotclosed
properly?
If water remains inside the
dishwasher,check...
■thedrainhoseisnotkinked.
■thedrainsyphonisnotobstructed.
■thedishwasherfiltersarenotclogged.
If the dishes are not being
cleaned properly, check...
■thecorrectamountofdetergenthas
beenadded.
■thereisregeneratingsaltinthesalt
container.
■thedisheshavebeenloadedcorrectly.
■theselectedprogrammeissuitable
forthetypeofdishesandthedegree
ofsoiling.
■allfiltersarecleanand positioned
correctly.
■the spray arm nozzles are not
obstructed.
■there is nothing obstructing the
rotationofthesprayarms.
Detergent compartment lid
can not be closed, check...
■hasthecompartmentbeenoverfilled?
■is the mechanism clogged with
remnantsofdetergent?
If the dishes fail to dry or
remaindirty,check...
■thereisrinseaidinsidetherinseaid
container.
■the rinse aid dispenser setting is
correct.
■thedetergentbeingusedisofgood
quality and has not lost its
effectiveness(forexample,through
incorrectstorage,withtheboxleft
open).
If the dishes show signs of
streaking,stainingetc.
check...
■therinseaiddispensersettingisnot
settoohigh.
If there are visible traces
of rust inside the tank,
check...
■the cap off the salt container is
securelyclosedandthatthewater
softnersettingiscorrect.
■thecorrectamountofdetergentis
beingused.Certaindetergentscan
bemorecorrosivethanothers.
■thetankismadeofsteelandtherefore
anyrustmarksareduetoexternal
elements(fragmentsofrustfromthe
tankpipes,pots,cutleryetc.)Special
productsarecommerciallyavailable
toremovesuchmarks.
...Duringwashing
■Unusual amount of foam is
created:
-Hasthecorrectdetergentbeenused.
■Dishwasher stops suddenly
during a wash cycle:
-Therehasbeenapowercut.
-Watersupplyhasbeeninterrupted.
■Knocking sound can be
heard inside the dishwasher:
-Asprayarmisknockingagainst
dishes.
■Rattling sound an be heard
inside the dishwasher:
-Crockeryhas not beenstacked
properly.
■Knocking sound can be
heard coming from the inlet
valves:
-Thisiscausedbythewaythewater
pipesarelaidadithasnoeffectupon
thewaythedishwasherfunctions.
Error messages
Yourdishwasherisequippedwithasafety
systemwhichisabletodetectoperating
faults.
Thesefaultsareindicatedbyoneortwo
washcycleindicatorlights “G”flashing
rapidly.
Takeanoteofwhichlightsareflashing,
turntheapplianceoffandcallHotpoint
Servicefortechnicalassistance(seeback
page).
Tapoffalarm
Ifyouhaveforgottentoturnthewatertap
on,theappliancewillstopautomatically
andwashcyclelights2and3(washand
rinses)willflashrapidly.
Turnon the watertap and the dish-
washerwillstartafterafewminutes.
TurnthedishwasheroffattheOn-Off
button,checkthewatersupplyandturn
onthewatertap,waitapproximately20
secondsbeforeturningapplianceback
on,thenrepeatyourwashcycleselec-
tions,thewashcyclewillstart.
Clogged filter alarm
Ifthedishwasherstopsandwashcycle
lights1and3(pre-washandrinses)flash
rapidly,thismeansthefilterisclogged.
Turnthedishwasheroff,followcleaning
instructioninthe‘CareandCleaning’sec-
tion.
Whenthefilterisbackinposition,turn
thedishwasherbackon.
Repeatyourwashcycleselections,the
washcyclewillstart.
Troubleshooting
Resolving minor problems yourself.
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having
to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again
that much sooner. The following list of common occurences and their remedies should help you identify the causes of
most problems.
If after all the checks, the appli-
ancestilldoes notoperateorthe
problem persists, call Hotpoint
Service(seeKEY CONTACTS,
backpage)andinformthemof:
-thetypeof problem
- the abbreviation of the model
name(Mod.)andtherelativenum-
bers (S/N) written on the rating
plate
locatedon the inner edgeofthe
door.
Switchoffatthemainssocketand
remove the plug. Turn off the
watersupply.
Water load solenoid valve
malfunction alarm.
Ifindicatorlight2(wash)flashesrapidly,
TURNthedishwasherOFFANDBACK
ONAGAINafteroneminute.Ifthealarm
persists,firstturnoffthewatertapto
avoidanyfloodingandthencutoffthe
electricitysupplyandcallfortechnical
assistance.
15