Beko BDV 7200X User manual

1 / EN
Dryer / User Manual
BDV 7200X
2960311918_EN/301219.1632
Front-Loading Dryer
Owner’s Guide:
Installation and Operation
Instructions
USA

Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product. We hope that your product which
has been manufactured with high quality and technology will give you the
best results. We advise you to read through this manual and the other
accompanying documentation carefully before using your product and keep
it for future reference. If you transfer the product to someone else, give its
manual as well. Pay attention to all details and warnings specified in the user
manual and follow the instructions given therein.
Use this user manual for the model indicated on the cover page.
Read the instructions.
Explanation of symbols
Throughout this user manual the following symbols are used:
CImportant information or useful hints about usage.
AWarning for hazardous situations with regard to life and property.
BWarning against electric shock.
Warning against hot surfaces.
Warning against fire hazard.
Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations.
Do not dispose of the packaging wastes with the domestic waste or other
wastes, discard them to the dedicated collection points designated by the local
authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.

1 Your Dryer 4
2 Important Safety Instructions 5
3 Installation Instructions 9
3.1 Electrical connection .............................8
3.2 Grounding Instructions .......................10
3.3 Appropriate installation location ..........11
3.4 Minimum Installation Clearances .........12
3.5 Use on top of a washer ......................12
3.6 Adjusting the feet ................................13
3.7 Ventilation duct and connection .........13
3.8 Destroying packaging material ............14
4 Operating Instructions 15
4.1 First Use .............................................15
4.2 Garments suitable for drying ...............15
4.3 Garments unsuitable for drying ...........15
4.4 Preparing clothes to be dried ..............16
4.5 Correct load capacity .........................16
5 Operating the product 17
5.1 Control Panel ......................................17
5.2 Symbols .............................................17
5.3. Preparation of drying machine ...........17
5.4 Program selection and consumption
chart .........................................................18
5.5 Auxiliary functions ...............................19
5.6 Warning indicators ..............................19
5.7 Starting the program ...........................19
5.8 Child Lock ..........................................19
5.9 Changing the program after it is
started ......................................................20
5.10 Cancelling the program .....................20
5.11 End of program ................................20
6 Technical Specifications 21
7 User maintenance and cleaning
instructions 22
7.1 Lint filter .............................................22
7.2 Sensor ...............................................22
8 Troubleshooting 23
9 Warranty Statement 24
TABLE OF CONTENTS

4 / EN Dryer / User Manual
Overview
Figure 1
1Your Dryer
1
25
1
2
3
4
5
3
4
Control Panel
Loading Door
Lint Filter
Type label
Adjustable Feet
NOTE: Specifications of this appliance may change without notice to improve the quality of the
product. Drawings in this manual are schematic and may not match your product exactly.
Values stated on the dryer labels or in the documentation accompanying it are obtained in the
laboratory in accordance with relevant standards. Depending on operational and environmental
conditions of the appliance, values may vary.

5 / EN
Dryer / User Manual
2Important Safety Instructions
A
WARNING: To reduce the risk of fire or electric shock
resulting in serious injury or death when using this
appliance, follow the basic precautions including the
following:
• Read all instructions before using the appliance. Failure to
follow these instructions will increase the risk of fire or electric
shock and will void the warranty.
AThis product has been designed for home use only.
• The appliance must be operated at temperatures between
+5°C and +35°C. (41°F and +95°F)
• The appliance must not be installed behind a lockable door,
a sliding door or a door with the hinges on the opposite side
to that of the tumble dryer.
• Do not install or store this appliance where it will be
exposed to weather.
• Do not tamper with the controls.
• Do not repair or replace any part of the appliance or
attempt any servicing unless specifically recommended in
the user-maintenance instructions or in published user-repair
instructions that you understand and have the skills to carry
out.
• Never wash the appliance with water.
• Never touch the plug with wet hands.
• Never pull from the cable to unplug the dryer.
• Do not operate the appliance if the power cord or plug is
damaged.
• For malfunctions that cannot be solved by information in
the operating manual: Turn off and unplug the appliance and
call an authorized service provider.

6 / EN Dryer / User Manual
• This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for
electric current. This appliance is equipped with a cord having
an equipment-grounding conductor and a grounded plug.
The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local
codes and ordinances.
B
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
representative or personnel if you are in doubt as to
whether the appliance is properly grounded.
• Power cord plug must be within easy reach after
installation.
• To reduce the risk of fire or electric shock, do not use
extension cords, multi-plugs or an adapter to connect the
dryer to electrical mains.
• Do not modify the plug provided with the appliance: if it will
not fit the outlet, have a proper outlet installed by a qualified
electrician.
• If the power supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified
persons in order to avoid an electrical hazard.
• The appliance must not be operated unless it is repaired!
• Ventilation openings in the base must not be obstructed by
carpets, etc.
• Exhaust air must not be discharged into a flue used for
exhausting fumes from appliances burning gas or other fuels.
• Adequate ventilation must be provided to avoid the back
flow of gases into the room from appliances burning other
fuels, including open fires.
• Do not dry articles that have been previously cleaned in,
washed in, soaked in or spotted with gasoline, dry-cleaning
solvents or other flammable or explosive substances as they
give off vapors that could ignite or explode.

7 / EN
Dryer / User Manual
• Do not use the tumble dryer if industrial chemicals have
been used for cleaning what you want to dry.
• Do not dry unwashed items in the tumble dryer.
• Do not place items exposed to cooking oils in your dryer.
Items contaminated with cooking oils may contribute to a
chemical reaction that could cause a load to catch fire.
• Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber-backed articles and clothes or
pillows fitted with foam rubber pads should not be dried in the
tumble dryer.
• Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
• Beko does not recommend the use of fabric softening
dryer sheets in our Electric Dryers. The contents of these
sheets can clog the units filters, causing reduced air flow and
possible damage to the heating system. You may use fabric
softeners in the washing machine but not the dryer.
• The appliance may only be used for the drying of textiles
that are marked accordingly.
• Undergarments that contain metal reinforcements should
not be placed in a tumble dryer. Damage to the tumble dryer
can result if any of the metal reinforcement come loose during
drying.
• Before loading check all garments for lighters, coins, metal
pieces, needles, etc.
• The use of fabric softener sheets is not recommended.
• The final part of a tumble dryer cycle occurs without heat
(the cool-down cycle) to ensure that the items are left at a
temperature that ensures the items are not damaged by
getting too hot.
AWARNING: Never stop the tumble dryer before the
end of the drying cycle unless all items are quickly
removed and spread out to dissipate heat.
• Do not reach into the appliance if the drum is moving.

8 / EN Dryer / User Manual
• Do not allow children to play on or in the appliance.Close
supervision of children is necessary when the appliance is
used near children.
• Keep pets away from the appliance during the drying cycle.
• Before the appliance is removed from service or discarded,
remove the door to the drying compartment.
• Close the loading door when you leave the area where the
dryer is located.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they are
supervised or have been given instructions concerning the
use of the appliance by a person responsible for their safety.
• Clean lint filter before or after each load.
• Keep area around the exhaust vent and adjacent
surrounding areas free from the accumulation of lint, dust, and
dirt.
• The interior of the appliance and exhaust ductwork should
be cleaned periodically by qualified service personnel.
• Never use the dryer without the lint filter.
• When your dryer is not in use or after the laundry is taken
out following the completion of drying process, turn off by
using the On/Off button. In cases when the On/Off button is in
the On position while the dryer is plugged in, keep the door
of the dryer closed.
• For power saving in models with lamps, when your dryer is
not in use, keep the door closed if the On/Off button is in the
On position and the dryer is energized.
A
WARNING: This product can expose you to chemicals
including Nickel (Metallic) which is known to the State
of California to cause cancer.
For more information go to www.P65Warnings.ca.gov
Note : Nickel is a component in all stainless steel and
some other metal components.

9 / EN
Dryer / User Manual
WARNING: Failure to follow
these instructions could result
in a risk of fire
•The clothes dryer (“appliance‘) installation
must be performed by a qualified installer.
•Install the appliance according to the
manufacturer’s instructions and local codes.
•Do not install a clothes dryer with flexible
plastic venting materials. If flexible metal (foil
type) duct is installed, it must be of a specific
type identified by the ap pliance manufacturer
as suitable for use with clothes dryers. Flexible
venting materials are known to collapse, be
easily crushed, and trap lint. These conditions
will obstruct the clothes dryer’s airflow and
increase the risk of fire.
SAVE THESE INSTRUCTIONS
3.1 Electrical connection
Connect the appliance to a grounded outlet
protected by a fuse or circuit breaker of
suitable capacity.
4-wire rece ptacle
(14 -30R)
3-wire rece ptacle
(10 -30R)
If yo u have 3-wir e receptacle, like
this , a 3-wire dryer cord mu st be
purchased locall y.
Dryer shipped with cord to fit this
type 4 -wire receptacle
CNeutral conecction is not used
in this product
Power Cable
3-Wire Electrical Connection
If your receptacle is a 3-wire receptacle as
shown below, you must obtain a 3-wire dryer
cord. A dryer cord can usually be found at
your local hardware supply, electrical supply
or home center. Cord should have closed loop
or upturned end wire terminating connectors.
The cord kit must be marked “For Use with
Clothes Dryers”.
3- wire receptacle
( 10-30R)
Typical 3- Wire Dryer Cord 240V/30 amp
NEMA 10-30 Type SRDT
AIf the dryer is installed in a mobile
home, recreational vehicles, new
branch-circuit installations or in
areas where local codes do not
permit grounding through the
neutral conductor, only a 4-wire
power supply cord shall be used.
3Installation Instructions

10 / EN Dryer / User Manual
To change the cord:
1. Make sure that the dryer is not plugged into
any power outlet.
BDO NOT plug end of dryer power
cord into a live receptacle before
connecting dryer power cord
to dryer terminals and closing
junction/splitter box as described
below.
BDO NOT repair old power supply
cords. Power cord must be
changed only by a qualified
person. There is a risk of electric
shock!
2. Remove the screw from the cover of the
junction box located at the top rear of the
dryer.
3. Remove the red, white and black wire from
the terminal block.
4. Remove the green ground wire from the
ground terminal.
5. Loosen the strain relief clamp holding the
4-wire cable.
6. Thread the 4-wire cable out through the
strain relief clamp.
7. Thread the new 3-wire dryer cord through
the strain relief clamp.
8. Attach the power cord Ground conductor
(the center wire) to the terminal labeled N.
Connect the terminal labeled N and the
Ground terminal labeled G with the supplied
short cable. Tighten the terminals so that they
securely hold the conductors.
9. Attach the two remaining power cord
outer conductors to the 2 terminals labeled
L. Tighten both screws so that the power
conductors are securely held in place.
10. Tighten the strain relief so that the power
cord cannot be moved.
11. Replace the cover on the junction box and
fasten in place.
Power Cable
The dryer is now ready to be plugged into the
3-wire receptacle of the proper rating.
The receptacle should be located so that the
plug and receptacle will be accessible with the
dryer in its installed position.
3.2 Grounding Instructions
This appliance must be grounded. In the event
of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing
a path of least resistance for electric current.
This appliance is equipped with a cord having
an equipment-grounding conductor and a
grounding plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
• Power cord plug must be within easy reach
after installation.
• The voltage and the allowed fuse/breaker
protection are specified in the section
“Technical Specifications”.
• The stated voltage must match your mains
voltage.
• Connection via extension cords or multi-
plugs should not be made.
• The main fuse/breaker and switches must
have a contact distance of minimum 3 mm.
BA damaged power cable must be
replaced by a qualified electrician.
BWARNING – Improper connection
of the equipment-grounding
conductor can result in a risk
of electric shock. Check with a
qualified electrician or service
representative or personnel if you
are in doubt as to whether the
appliance is properly grounded.
Do not modify the plug provided
with the appliance: if it will not fit
the outlet, have a proper outlet
installed by a qualified electrician.
BThe appliance must not be
operated unless it is repaired!
There is the risk of electric shock!

11 / EN
Dryer / User Manual
3.3 Appropriate installation
location
•Install your appliance in environments that
have no risk of freezing and are in a stable and
level position.
•Do not place your appliance on a high pile
rug or on similar surfaces.
•Operate your appliance in a well-ventilated,
dust-free environment.
•Do not block the air ducts in front of and
under the dryer.
BMake sure that your appliance is
not placed on the power cable.
BKeep appliance at least 0.6”
(1.5 cm) from the edges of other
furniture.

12 / EN Dryer / User Manual
Ventilation Requirements
Closet door must have 2 openings, one
located 3.2 inches (8 cm) from bottom of door
having a minimum area of 16 sq. inches (103
cm2) and the other one located 3 inches (7.5
cm) from top of door having a minimum area
of 46 sq. inches (294 cm2).
3.5 Use on top of a washer
•A stacking-kit (Part no: 297 954 0100)
should be used between the washer and dryer
for use on top of a washer. The stacking-kit
should be installed by the Authorized Service
provider.
3.4 Minimum Installation
Clearances
Alcove or
Built-under Closet
Sides 0.16 in. (4 mm) 0.16 in. (4 mm)
Top 1 in. (25 mm) 1 in. (25 mm)
Rear 4 in. (100 mm) 4 in. (100 mm)
Front 0.20 in. (5 mm) 0.20 in. (5 mm)
33 ¾"
(856,5 mm)
23
(595 mm)
22
(583 mm)
716
"
/
1 5
/
16
"
900900
36.14
(918 mm)
min.
23.7
603 mm
min.
24.6
(625 mm)
min.
”
”
”

13 / EN
Dryer / User Manual
•Place the appliance on a solid floor. If it
is to be placed on top of a washer, the
approximate weight together may reach 397
lbs (180 kg) when they are full. Therefore,
the floor must be capable of carrying the load
placed on it!
3.6 Adjusting the feet
In order to ensure that your appliance
operates almost silently and vibration-free,
it must stand level and balanced on its feet.
The all feet of the appliance can be adjusted.
Balance the appliance by adjusting the feet.
CDo not use any tools to loosen the
adjustable feet. Otherwise, they may
be damaged.
CNever unscrew the adjustable feet
from their housings.
3.7 Ventilation duct and
connection
Ventilation duct ensures exhaust of air from
inside the appliance.
The vented dryer has 1 air outlet.
AOnly rigid or flexible metal duct
should be used for exhausting.
• In Canada, the diameter of the duct to be
used should be 4” (102 mm). In United States,
the regulation for the required exhaust duct
diameter must be followed.
Maximum duct length is given in the table
below:
Metal rigid duct
Number of
Elbows Length
0 92ft (28.0m)
1 82ft (25.0m)
2 72ft (21.9m)
3 62ft (18.9m)
4 52ft (15.8m)
To connect a ventilation duct;
1.Connect the air outlet metal duct to the
spacer by turning it counter-clockwise.
2.Make the duct passages as shown in the
illustration below.
CExhaust of humid air from the dryer
into the room is to be avoided. It
may damage the walls and furniture
in the room.

14 / EN Dryer / User Manual
CThe ventilation duct can be routed
outdoors via a window or it can
be connected to the air outlet in a
bathroom.
CAir outlet duct must be extended
directly outdoors. There must be
a limited number of elbows to not
hinder air flow.
CTo prevent water accumulation in
the duct, make sure it is not folded
on the floor.
CIn Canada only those foil-type
flexible ducts, if any, specificially
identified for use with the appliance
by the manufacturer shallbe used.
In the United States, only those foil-
type flexible ducts, if any, specifically
identified for use with the appliance
by the manufacturer and that
comply with the Outline for Clothes
Dryer Transition Duct, Subject
2158A, shall be used.
AThe appliance should not be
vented into a chimney, a wall, a
ceiling, an attic, a crawl space or a
concealed space of a building.
ADo not operate the appliance at
the same time with heaters such
as a coal or gas stove. Airflow may
cause the chimney to flare up.
CCare must be taken not to pinch or
bend the ducts.
CThe end of the hose should not be
bent, it should not be stepped on
and it must not be folded between
the drain and the dryer.
CThe total length of flexible metal
duct shall not exceed 7.8 foot
(2.4 m).
CThe duct shall not be assembled
with screws or other fastening
means that extend inside the duct
to catch lint.
AThe appliance should not be
vented into a chimney, a wall, a
ceiling, an attic, a crawl space or a
concealed space of a building.
3.8 Destroying packaging
material
APackaging material can be
dangerous to children. Keep the
packaging materials out of the
reach of children or dispose of
them accordingly.
Do not dispose of them together with normal
domestic waste.
Packaging materials of your appliance are
manufactured from recyclable materials.

15 / EN
Dryer / User Manual
AWARNING: To reduce the risk of fire, electric shock, or personal
injury, read the 2. IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
4Operating Instructions
Drying
Settings
At any temperature At high temperature At medium temperature At low temperature Without heating Hang to dry Lay to dry Hang wet to dry Lay in shadow to dry Dry-cleanable
Iron -
IRON
Dry or Steam
Iron at high
temperature
Iron at medium
temperature Iron at low
temperature
Do not iron
Iron without
steam
Maximum temperature 200 0C
392 0F
150 0C
302 0F
110 0C
230 0F
LAUNDRY DRYING SYMBOLS
Drying
Symbols Suitable for
dryer No Iron Sensitive /
Delicate dry
Do not dry
with dryer
Do not dry Do not dry-
clean
4.1 First Use
•When operating your dryer for the first time
check inside the drum for any foreign objects.
•Partly load the drum with wet clothes and let
the dryer run for approximately 15 minutes.
This operation will clean the drum before
loading garments.
•You may smell an unpleasant odor and
excessive fiber/lint may accumulate during the
first drying cycle.
4.2 Garments suitable for
drying
Always follow the advice on garment labels.
Dry only laundry having a label stating that
they are suitable for tumble-drying.
4.3 Garments unsuitable for
drying
•Items with metal attachments like, belt
buckles and metal buttons can damage your
dryer.
•Do not dry items like woolens, silk garments
and nylon stockings, delicate embroidered
fabrics, garments with metal accessories and
items like sleeping bags in the dryer.
•Garments made of delicate and valuable
fabrics as well as lace curtains can be
permanently wrinkled. Do not dry these in your
dryer!
•Do not dry items made of hermetic fibers
such as pillows and quilts in the dryer.
•Garments made of foam or rubber may
deform.
•Do not dry clothes containing rubber in the
dryer.
•Do not dry clothes exposed to petroleum, oil,
combustible or explosive agents in the dryer
even if they are washed beforehand.

16 / EN Dryer / User Manual
•Overly wet laundry or laundry with dripping
water must not be put into the dryer.
4.4 Preparing clothes to be
dried
•All laundry must be spun at the highest
possible spin speed the washer allows for the
textile type.
•Laundry may be tangled after washing.
Separate laundry before placing them into
your dryer.
•Sort laundry according to their types and
thicknesses. Dry similar types of laundry
together.
4.5 Correct load capacity
CPlease consult the information in
the “Program Selection” section.
AAdding laundry to the dryer over
the level shown in the figure is not
recommended. Drying performance
will be reduced when the dryer is
overloaded. Doing so may damage
your dryer and your clothes.
CPlace garments into the drum
loosely so they won’t get tangled.
CLarge items (e.g. bed sheets, quilt
covers, large tablecloths) may
bunch-up. Stop the dryer 1 or 2
times during drying process to
separate any bunched-up laundry.
The following weights are given as examples.
Home articles Weight (g)* Weight (lb)*
Cotton quit covers (double) 1500 3 ¼
Cotton quit covers (single) 1000 2 ¼
Bed sheets (double) 500 1 1/8
Bed sheets (single) 350 ¾
Large tablecloths 700 1 ½
Small tablecloths 250 ½
Tea napkins 100 ¼
Bath towels 700 1 ½
Hand towels 350 ¾
Garments Weight (g)* Weight (lb)*
Blouses 150 3/8
Cotton shirts 300 5/8
Shirts 200 ½
Cotton dresses 500 1 1/8
Dresses 350 ¾
Jeans 700 1 ½
Handkerchiefs (10 pieces) 100 ¼
T-Shirts 125 ¼
*Dry laundry weight before washing.
Approximate weights of average home laundry
type.

17 / EN
Dryer / User Manual
5 Operating the product
1. On/Off/Program selecton button
2. Start/Pause button
3. End Tme button
5.1 Control Panel
5.2 Symbols
5.3. Preparation of drying
machine
• Plug the drying machine.
• Open the loading door.
• Place the laundry to the drying machine
without jamming them.
• Push and close the loading door.
AEnsure that no laundry is jammed
to the loading door.
Damp
Filter
Lock
3
4 5
2
1
Super
Extra
Normal
Damp
Timed
Filter
Lock
Buzzer
4. Buzzer volume button
5. Dryng level/Tme programs selecton
button
Select the desired program using the On/Off/
Program selection knob, the machine will turn
on.
CSelecting a program using the On/
Off/Program selection button does
not mean that the program started.
Press the Start / Pause button to
start the program.
Volume up
Filter
cleaning
Tank
full
Child-proof
lock
Mute
Filter drawer /
Heat exchanger
cleaning
End/anti-
creasing
On/O Timer
Delay
Drying Cupboard
Dry
Iron Dry
Express
14’
Delicates
Jeans BabyProtect Extra dry Cupboard
dry plus
Sport Freshen Up
Start
pause
cancel
Cottons
Synthetics
Mix
Express
30’
Drying Rack/
TimeDry
Daily
Bedding/
Duvet
Express Shirt 30' Wool Refresh
Hygiene
(BabyProtect+)
Shirts
Cottons Eco Refreshment Low
temperature
select
Dryness
Level+
Dryness
Level++
Dryness
Level
DownWear

18 / EN Dryer / User Manual
5.4 Program selection and consumption chart
EN
Programs Wight
(Ib)
Spin speed in wash-
ing
machine (rpm)
Drying time
(minutes) Explanation
Cottons/Nor-
mal 15 Medium 121 Durable clothing can be dried with this program at a normal temperature.
Perm Press 7 Low 55
Less durable clothing can be dried with
this program at a at a lower temperature
compared to the cottons program. It is
recommended for synthetic clothing (e.g.)
Heavy Duty 8 Medium 131 Use for heavy -duty clothes such as jeans or garmets
should be extra dry.
Mixed fabric 8 Medium 85 Mix program (Regular Dry) is for mixed loads with dif- ferent types of fabrics. Mixed laundry can be dried at a
lower temperature.
Sanitize 11 Medium 125
It is a long-term program that you can use for the clothes
(baby clothes, towels, underwear, etc. cotton) you
require hygeine. Hygiene is provided with high tempera-
ture. It is especially suitable for durable fabrics. Do not
dry use this program for delicate fabrics. Super drying
level is recommended to kill high incidence of bacteria.
Timed Dryer
(High tempa-
ture) - Medium 10 Timed programs can be selected to reach the desired
nal drying level at high
temperatures.
Timed Dryer
(low tempa-
ture) - Medium 10 Timed programs can be selected to reach the desired
nal drying level at low temperatures.
Air u - - 10 Only cool air circulation is performed for 10 minutes
without providing hot air.
Wool 4 Low 20
Use for shofting is wool items and garments made of
wool blend such as sweaters, scarves,head scarves. It
prepares wool garmets for drying with low air tempea-
ture.
Towel 11 Medium 95 Drying towels such as kitchen towel, bath towel and
hand towel.
Wrinkle Free 2 Medium 40 Dries the shirts in a more sensitive way so
that they are less wrinkled and ironed easily.
Delicates 3 Low 40 Very delicate laundry (silk blouses, ne underwear, etc.) can be dried at a lower temperature that are suitable for
drying or for laundry that is advised to be handwashed.
Sports wear 8 Medium 85 Use for drying sport, tness, and casual polyester
blended garments.
Bedding 5 High 40 Drying cotton beddings such as bedlinen, sheets, bed
cover, pillow case
Quick Dry 2 High 45 For the small loads of qualied fabrics with short drying
times such as synthetic clothing.

19 / EN
Dryer / User Manual
Super
Use for heavy-duty fabrics in to be
very dry
Extra Use for extra drying
Normal
Use fora normal dryness level. It is
recommended level fora energy
saving.
Damp Items can be partially damp
5.5 Auxiliary functions
Buzzer / time
Drying machine makes an audible warning
when the program is completed. If you don’t
want the machine to make an audible warn-
ing, press the “Buzzer ” button. When you
press the Buzzer button, a light will illuminate
and no audible warning will be made when the
program ends.
CYou can select this function before
or after the program starts.
Dry/Time level button is used to adjust pro-
gram duration while the timed programs are
selected.
Drying Level
Dry/Time Level button is used for adjusting to
desired dryness level. Program duration may
change depending on the selection.
CYou can activate this function only
prior to start of program.
End time
You can delay the end time of the program up
to 24 hours with End time function.
1. Open the loading door and place the
laundry.
2. Select the drying program.
3. Press the End Time selection button and
set the delay time you wish. End Time
LED will illuminate. (When pressed and
hold the button, End Time proceeds non-
stop).
4. Press the Start / Pause button. End Time
countdown starts. “:” Separator in the
middle of displayed delay time flashes.
CYou can add or remove laundry
within end time. Displayed time
is the sum of normal drying time
and end time. End Time LED will
turn off at the end of countdown,
drying starts and drying LED will
illuminate.
Changing the end time
If you want to change the duration during the
countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Cancelling the end time function
If you want to cancel the end time countdown
and start the program immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Dry/Time Level but-
ton.
5.6 Warning indicators
CWarning indicators may vary
depending on the model of your
dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.
5.7 Starting the program
Press the Dry/Time Level button to start the
program.
Dry/Time Level and Drying indicators will illu-
minate to indicate that program started.
5.8 Child Lock
The drying machine has a child lock which
prevents the program flow from being inter-
rupted when the buttons are pressed during
a program. When the child lock is activated,
all buttons on the panel except the On/Off/
Program selection knob are deactivated.
Press the Buzzer button simultaneously for 3
buttons to activate the child lock.
The child lock has to be deactivated to be
able to start a new program after the current
program is finished or to be able to interfere
with the program. To deactivate the child lock,
keep the same button pressed for 3 seconds.
Drying level

20 / EN Dryer / User Manual
CWhen the child lock is activated,
the child lock warning indicator on
the screen turns on.
Child lock deactivates when the
drying machine is turned off and on
by the On/Off/Cancel knob.
When the drying machine runs and
the child lock is active, it beeps
twice when the program selection
knob is turned. If the child lock
is deactivated without returning
the program selection knob to its
previous position, program will
terminate due to the change in the
program selection knob position.
5.9 Changing the program after
it is started
You can change the program you selected to
dry your laundry with a different program after
the drying machine starts running
• For instance, select Extra Dry program
by turning the On/Off/Program selection
knob to select Extra Dry instead of Iron
Dry.
• Press the Dry/Time Level button to start
the program.
Adding and removing clothes
during stand-by
If you want to add or remove clothes to/from
the drying machine after the drying program
starts:
• Press the Dry/Time Level button to put
the drying machine in Stand-by state. The
drying operation stops.
• Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
• Press the Dry/Time Level button to start
the program.
CAdding laundry after the drying
operation starts may cause the
dried laundry inside the machine
to mix with wet laundry and leave
the laundry damp at the end of
operation.
Adding or removing laundry
during drying may be repeated as
many times as you wish. But this
operation continuously interrupts
the drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
If a new program is selected by
turning the program selection
knob while the drying machine is
in stand-by, the running program
terminates.
Do not touch the inner surface of
the drum while adding or removing
clothes during a continuing
program. The drum surface is hot.
5.10 Cancelling the program
If you want to cancel the program and ter-
minate the drying operation for any reason
after the drying machine starts running, turn
the On/Off/Cancel knob, the program will be
cancelled.
A
The inside of the drying machine
shall be extremely hot when you
cancel the program during machine
operation, so run the refresh
program to allow it to cool down.
5.11 End of program
When the program ends, the Last/Anti-Wrinkle
and Fibre Filter Cleaning Warning LEDs on
the program follow up indicator will illuminate.
Loading door may be opened and the dryer
machine becomes ready for another run.
Bring the On/Off/Program selection knob to
On/Off position to turn the drying machine off.
CIf the laundry is not removed
after the program is completed,
the wrinkle prevention function
activates for 2 hours to prevent the
laundry inside the machine to get
wrinkled. The program tumbles the
laundry with 10-minute intervals to
prevent them from wrinkling.