9 / 29 EN
Always have the repair procedures
carried out by the Authorised Service
Agent. Manufacturer shall not be held
liable for damages that may arise from
procedures carried out by unauthorised
persons.
To make the product ready for use, make
sure that the electricity installation
is appropriate before calling the
Authorised Service Agent. If not, call
a qualified electrician to have any
necessary arrangements carried out.
C
B
B
WARNING: Manufacturer shall
persons.
A
WARNING:
safety.
C
Make sure that the power
3.1.Appropriate
installation location
A
WARNING: If the door of the
to pass, then the product's doors
can removed and the product
use the product comfortably.
from heat sources such as hobs, ovens,
heaters and stoves.Product must not
walls.
surface to prevent jolts.
where the temperature falls below
-5°C.
C
them.
3Installaton