Beko GN1416221XP User manual

GN1416221XP-GN1416231XPN
EN/RO/BG
57 9979 0000/AK-1/4-EN-RO-BG
Refrigerator
User Manual
Frigider
Manual de instruc iuni
ɏɥɚɞɢɥɧɢɤ
Ɋɴɤɨɜɨɞɫɬɜɨɡɚɭɩɨɬɪɟɛɚ

Please read this manual before using the product!
Dear Customer,
We'd like you to make the best use of our product, which has been manufactured in modern facilities
with care and meticulous quality controls.
Thus, we advice you to read the entire user manual before you use the product. In case the product
changes hands, do not forget to hand the guide to its new owner along with the product.
This guide will help you use the product quickly and safely.
tPlease read the user guide carefully before installing and operating the product.
tAlways observe the applicable safety instructions.
tKeep the user guide within easy reach for future use.
tPlease read any other documents provided with the product.
Keep in mind that this user guide may apply to several product models. The guide clearly indicates any
variations of different models.
CImportant information and useful
tips.
ARisk of life and property.
BRisk of electric shock.
The product’s packaging is made of
recyclable materials, in accordance
with the National Environment
Legislation.
!
!
!"##$%&'(!)*+,& !"#$%&'#$()'*'$+ (*)
%*-.',+/%.*
C
.The model information as stored in the product data base
can be reached by entering following website and searching
for your model identifier (*) found on energy label.
https://eprel.ec.europa.eu/

2 / 30 EN Refrigerator / User Manual
1- Safety Instructions 3
2 Your Refrigerator 8
2 Your Refrigerator 9
3 Installation 10
3.1 Appropriate location for installation . . . . . . .10
3.2 Installing the plastic wedges . . . . . . . . . . . .10
3.3 *Adjusting the feet . . . . . . . . . . . . . . . . . . .11
3.4 Electric connection . . . . . . . . . . . . . . . . . . .12
4 Preparation 13
4.1 Things to be done for saving energy . . . . .13
4.2 Recommendations about the fresh food
compartment. . . . . . . . . . . . . . . . . . . . . .13
4.3 Initial use. . . . . . . . . . . . . . . . . . . . . . . . .14
5 Operating the product 15
5.1 Indicator panel . . . . . . . . . . . . . . . . . . . . . .15
5.2 Indicator panel. . . . . . . . . . . . . . . . . . . . .20
5.3 Freezing fresh food. . . . . . . . . . . . . . . . . . .22
5.4 Recommendations for preserving the frozen
food . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
5.5 Deep-freeze information . . . . . . . . . . . . . . .23
5.6 Placing the food . . . . . . . . . . . . . . . . . . . . .24
5.7 Door open warning. . . . . . . . . . . . . . . . . . .24
5.8 Crisper. . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.9 Humidity-controlled crisper . . . . . . . . . . . . .24
(FreSHelf). . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.10 Egg tray . . . . . . . . . . . . . . . . . . . . . . . . . .24
5.11 Movable Middle Section . . . . . . . . . . . . . .25
5.12 Cool Control Storage Compartment . . . . .25
5.13 Blue light/HarvestFresh. . . . . . . . . . . . . . .25
5.14 Odour filter. . . . . . . . . . . . . . . . . . . . . . . .25
5.15 Wine cellar compartment . . . . . . . . . . . . .26
5.16 Use of internal water dispenser and water
dispenser at the door . . . . . . . . . . . . . . . .28
5.17 Dispensing water . . . . . . . . . . . . . . . . . . .28
5.18 For using water dispenser. . . . . . . . . . . . .29
5.19 Icematic . . . . . . . . . . . . . . . . . . . . . . . . .29
5.20 Icematic and ice storage container . . . . . .29
6 Maintenance and cleaning 30
6.1 Avoiding bad odours. . . . . . . . . . . . . . . . .30
6.2 Protecting the plastic surfaces . . . . . . . . .30
7. Troubleshooting 31

3/ 30 EN Refrigerator / User Manual
tThis section contains safety instructions that will
help get protected against risks of personal injury
or property damage.
tOur company shall not be responsible for
damages that may arise when these instructions
are not followed.
A Installation and repair procedures must
always be performed by the manufacturer, authorised
service agent or a qualified person specified by the
importer.
A Only use original parts and
accessories.
A Original spare parts will be provided for
10 years, following the product purchasing date.
A Do not repair or replace any part of the
product unless specified expressly in the user manual.
A Do not make any technical
modifications to the product.
A 1.1 Intended Use
tThis product is not suitable for commercial use
and it must not be used out of its intended use.
This product is designed to be used in houses and
indoor places.
For example:
- Personnel kitchens in stores, offices and other
working environments,
- Farm houses,
- Areas used by customers at hotels, motels and
other types of accommodation,
- Bed&breakfast type hotels, boardinghouses,
- Catering and similar non-retail applications.
This product should not be used outdoors with or
without a tent above it such as boats, balconies or
terraces. Do not expose the product to rain, snow, sun
or wind.
There is the risk of fire!
A1.2 - Safety for children,
vulnerable persons and pets
tThis product can be used by children at and
above 8 years old and by persons with limited
physical, sensory or mental capabilities or who
lack experience and knowledge provided that they
are supervised or trained on the safe use of the
product and the risks it brings out.
tChildren aged from 3 to 8 years are allowed to
load and unload refrigerating products.
tElectrical products are dangerous for children and
pets. Children and pets must not play with, climb
or enter the product.
tCleaning and user maintenance should not be
performed by children unless they are supervised
by someone.
tKeep packaging materials away from children.
There is the risk of injury and suffocation!
tBefore disposing of the old or obsolete product:
1. Unplug the product by gripping from the plug.
2. Cut the power cable and remove it from the appliance
together with its plug
3. Do not remove the shelves or drawers so that it is
harder for children to enter the product.
4. Remove the doors.
5. Keep the product in a way that it will not tip over.
6. Do not allow children play with the old product.
tNever throw the product into fire for disposal.
There is the risk of explosion!
tIf there is a lock on the door of the product, the
key should be kept out of the reach of children.
1- Safety Instructions

4 / 30 EN Refrigerator / User Manual
Important instructions regarding safety and environment
A1.3 - Electrical safety
tThe product must be unplugged during
installation, maintenance, cleaning, repairing and
moving procedures.
tIf the power cable is damaged, it must be
replaced by a qualified person specified by
the manufacturer, authorised service agent or
importer in order to avoid potential dangers.
tDo not squeeze the power cable under or behind
the product. Do not place heavy objects on the
power cable. Power cable must not be bent
excessively, pinched or get in contact with any
heat source.
tDo not use extension cords, multi-sockets or
adapters to operate the product.
tPortable multi-sockets or portable power sources
can overheat and cause fire. Therefore, do
not keep any multi-sockets behind or near the
product.
tPlug must be easily accessible. If this is not
possible, the electrical installation to which the
product is connected must contain a device
(such as a fuse, switch, circuit breaker, etc.)
which conforms to the electrical regulations and
disconnects all poles from the grid.
tDo not touch the power plug with wet hands.
tRemove the plug from the socket by gripping the
plug and not the cable.
A1.4 - Transportation safety
tProduct is heavy; do not move it alone.
tDo not hold its door when moving the product.
tPay attention not to damage the cooling system
or the piping during transportation. If the piping is
damaged, do not operate the product and call the
authorised service agent.
A1.5 - Installation safety
tCall the authorised service agent for installation of
the product. To make the product ready for use,
check the information in the user manual to make
sure that the electricity and water installations
are suitable. If they are not, call a qualified
electrician and plumber to have the necessary
arrangements made. Otherwise, there is the
risk of electric shock, fire, problems with the
product, or injury!
tPrior to installation, check if the product has
any defects on it. If the product is damaged,
do not have it installed.
tPlace the product on a clean, flat and solid
surface and balance it with adjustable feet.
Otherwise, the product may tip over and
cause injuries.
tThe installation location must be dry and
well ventilated. Do not place carpets, rugs or
similar covers under the product. Insufficient
ventilation causes the risk of fire!
tDo not cover or block the ventilation openings.
Otherwise, power consumption increases and
your product may get damaged.
tProduct must not be connected to supply
systems such as solar power supplies.
Otherwise, your product may get damaged
due to sudden voltage changes!
tThe more refrigerant a refrigerator contains,
the larger the installation location must
be. If the installation location is too small,
flammable refrigerant and air mixture will
accumulate in cases of refrigerant leakage
in cooling system. The required space for
each 8 gr of refrigerant is 1 m minimum.
The amount of refrigerant in your product is
indicated on the Type Label.
tProduct must not be installed in places
exposed to direct sunlight and it must be
kept away from heat sources such as hobs,
radiators, etc.
If it is inevitable to install the product close to
a heat source, a suitable insulation plate must
be used in between and the following minimum
distances must be kept to the heat source:
- Minimum 30 cm away from heat sources
such as hobs, ovens, heater units or stoves,

5/ 30 EN Refrigerator / User Manual
Important instructions regarding safety and environment
- Minimum 5 cm away from electric ovens.
tProtection class of your product is Type I.
Plug the product in a grounded socket that
conforms the voltage, current and frequency
values stated on the type label of the product.
The socket must be equipped with a 10 A – 16
A circuit breaker. Our company shall not be
liable for any damages that will arise when
the product is used without grounding and
electrical connection in accordance with the
local and national regulations.
tProduct must not be plugged in during
installation. Otherwise, there is the risk of
electric shock and injury!
tDo not plug the product in sockets that are
loose, dislocated, broken, dirty, greasy or bear
the risk of getting in contact with water.
tRoute the power cable and hoses (if any) of the
product in a way that they do not cause risk of
tripping over.
tExposing the live parts or power cable to
humidity may cause short circuit. Therefore,
do not install the product in places such as
garages or laundry rooms where humidity is
high or water may splash. If the refrigerator
gets wet with water, unplug it and call the
authorised service agent.
tNever connect your refrigerator to energy
saving devices. Such systems are harmful to
your product.
A1.6- Operational safety
tNever use chemical solvents on the product.
There is the risk of explosion!
tIf the product malfunctions, unplug it and do
not operate until it is repaired by the authorised
service agent. There is the risk of electric
shock!
tDo not place flame sources (lit candles,
cigarettes, etc.) on or close to the product.
tDo not climb on the product. There is the risk
of falling and getting injured!
tDo not damage the pipes of the cooling
system with sharp or penetrating objects.
The refrigerant that might come out when the
refrigerant pipes, pipe extensions or surface
coatings are punctured causes skin irritations
and eye injuries.
tUnless recommended by the manufacturer, do
not place or use electrical devices inside the
refrigerator/deep freezer.
tBe careful not to trap your hands or any other
part of your body in the moving parts inside the
refrigerator. Pay attention not to squeeze your
fingers between the door and the refrigerator.
Be careful when opening and closing the door
particularly if there are children around.
tNever eat ice cream, ice cubes or frozen food
right after removing them from the refrigerator.
There is the risk of frostbite!
tWhen your hands are wet, do not touch the
inner walls or metal parts of the freezer or
the food stored therein. There is the risk of
frostbite!
tDo not place tins or bottles that contain
carbonated drinks or freezable liquids in the
freezer compartment. Tins and bottles may
burst. There is the risk of injury and material
damage!
tDo not place or use flammable sprays,
flammable materials, dry ice, chemical
substances or similar heat-sensitive materials
near the refrigerator. There is the risk of fire and
explosion!
tDo not store explosive materials that contain
flammable materials, such as aerosol cans, in
your product.
tDo not place containers filled with liquid onto
the product. Splashing water on an electrical
part may cause electric shock or the risk of fire.
tThis product is not intended for storing
medicines, blood plasma, laboratory
preparations or similar medical substances and
products subject to Medical Products Directive.
tUsing the product against its intended purpose
may cause the products stored inside it to
deteriorate or spoil.
tIf your refrigerator is equipped with blue light,
do not look at this light with optical tools. Do
not stare at UV LED lamp directly for a long
time. Ultraviolet light may cause eye strain.

6 / 30 EN Refrigerator / User Manual
Important instructions regarding safety and environment
tDo not overload the product. Objects in the
refrigerator may fall down when the door is
opened, causing injury or damage. Similar
problems may arise if any object is placed onto
the product.
tTo avoid injuries, make sure that you have
cleaned all the ice and water that may have
fallen or splashed on the floor.
tChange the position of the shelves/bottle
holders on the door of your refrigerator only
when they are empty. There is the risk of injury!
tDo not place objects that can fall down/tip over
onto the product. Such objects may fall down
when the door is opened and cause injuries
and/or material damage.
tDo not hit or exert excessive force on glass
surfaces. Broken glass may cause injuries and/
or material damage.
tCooling system of your product contains
R600a refrigerant: Type of the refrigerant used
in the product is indicated on the type label.
This refrigerant is flammable. Therefore, pay
attention not to damage the cooling system
or the piping while the product is in use. If the
piping is damaged:
- Do not touch the product or the power cable,
- Keep away potential sources of fire that may
cause the product to catch fire.
- Ventilate the area where the product is
located. Do not use fans.
- Call the authorised service agent.
tIf the product is damaged and you see
refrigerant leak, please stay away from the
refrigerant. Refrigerant may cause frostbite in
case of skin contact.
For products with a Water Dispenser/
Ice Machine
tUse only potable water. Do not fill the
water tank with any liquids -such as
fruit juice, milk, carbonated beverages
or alcoholic drinks- that are not suitable
for use in the water dispenser.
tThere is the risk for health and safety!
tDo not allow children play with the
water dispenser or ice machine
(Icematic) in order to prevent accidents
or injuries.
tDo not insert your fingers or other
objects into the water dispenser hole,
water channel or ice machine container.
There is the risk of injury or material
damage!
A1.7- Maintenance
and cleaning safety
tDo not pull from the door handle if you need
to move the product for cleaning purposes.
Handle may break and cause injuries if you
exert excessive force on it.
tDo not spray or pour water on or inside the
product for cleaning purposes. There is the risk
of fire and electric shock!
tDo not use sharp or abrasive tools when
cleaning the product. Do not use household
cleaning products, detergent, gas, gasoline,
thinner, alcohol, varnish etc.
tOnly use cleaning and maintenance products
inside the product that are not harmful for
food.
tNever use steam or steam assisted cleaners to
clean or defrost the product. Steam gets into
contact with the live parts in your refrigerator,
causing short circuit or electric shock!
tMake sure that no water enters the electronic
circuits or lighting elements of the product.
tUse a clean and dry cloth to wipe the foreign
materials or dust on the pins of the plug. Do
not use a wet or damp cloth to clean the plug.

7/ 30 EN Refrigerator / User Manual
Important instructions regarding safety and environment
There is the risk of fire and electric shock!
A1.8- HomeWhiz
tWhen you operate your product through
HomeWhiz application, you must observe the
safety warnings even when you are away from
the product. You must also follow the warnings
in the application.
A1.9- Lighting
tCall the authorised service when it is required
to replace the LED/bulb used for lighting.

8 / 30 EN Refrigerator / User Manual
CFigures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.
2 Your Refrigerator
6
*12
1- Control and indicator panel
2- Butter & Cheese section
3- 70 mm moving door shelf
4- Fridge compartment glass shelf
5- Fridge compartment crisper
6- Gallon door shelf
7- Chiller compartment
8- Icebox drawer
9- Multizone compartment glass shelf/cooler
10- Freezer compartment drawers
11- Multizone Compartment's drawer
12- Water tank
!"#$%&#'()

9/ 30 EN Refrigerator / User Manual
CFigures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.
2 Your Refrigerator
1- Control and indicator panel
2- Butter & Cheese section
3- 70 mm moving door shelf
4- Fridge compartment glass shelf
5- Fridge compartment crisper
6- Gallon door shelf
7- Chiller compartment
8- Icebox drawer
9- Multizone compartment glass shelf/cooler
10- Freezer compartment drawers
11- Water tank
!"#$%&#'()
*2
*3
4
56
7
*8
9
1
10
5*11

10 / 30 EN Refrigerator / User Manual
3.1 Appropriate location
for installation
Contact an Authorized Service for the installation
of the product. In order to prepare the product
for use, refer the information in the user manual
and ensure that electrical installation and water
installation are appropriate. If not, call a qualified
electrician and technician to have any necessary
arrangements carried out.
BWARNING: Manufacturer shall not
be held liable for damages that may
arise from procedures carried out by
unauthorized persons.
BWARNING: Product must not be plugged
in during installation. Otherwise, there is
the risk of death or serious injury!
A
WARNING: : If the door clearance of the
room where the product shall be placed is
so tight to prevent passing of the product,
remove the door of the room and pass the
product through the door by turning it to
its side; if this does not work, contact the
authorized service.
t1MBDFUIFQSPEVDUPOBMFWFMGMPPSTVSGBDFUPprevent jolts.
t*OTUBMMUIFQSPEVDUBUMFBTUDNBXBZGSPNheat sources such as hobs, heater cores and
stoves and at least 5 cm away from electrical
ovens.
t1SPEVDUNVTUOPUCFTVCKFDUFEUPEJSFDUTVOMJHIUand kept in humid places.
t:PVSQSPEVDUSFRVJSFTBEFRVBUFBJSDJSDVMBUJPOUPfunction efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
clearance between the product and the ceiling,
rear wall and the side walls.
t*GUIFQSPEVDUXJMMCFQMBDFEJOBOBMDPWFremember to leave at least 5 cm clearance
between the product and the ceiling, rear
wall and the side walls. Check if the rear wall
clearance protection component is present at
its location (if provided with the product). If the
component is not available, or if it is lost or
3 Installation
fallen, position the product so that at least 5 cm
clearance shall be left between the rear surface
of the product and the wall of the room. The
clearance at the rear is important for efficient
operation of the product.
t%POPUJOTUBMMUIFQSPEVDUJOQMBDFTXIFSFUIFtemperature falls below -5°C.
3.2 Installing the plastic wedges
Plastic wedges supplied with the product are
used to create the distance for the air circulation
between the product and the rear wall.
1. To install the wedges, remove the screws on the
product and use the screws supplied together with the
wedges.
2. Insert the 2 plastic wedges onto the rear ventilation
cover as illustrated in the figure.

11/ 30 EN Refrigerator / User Manual
Installation
3.3 *Adjusting the feet
If the product stands unbalanced after installation,
adjust the feet on the front by rotating them to the
right or left.
*If your product does not have a wine
compartment or is not a glass door, your product
does not have adjustable stands, the product has
fixed stands.
To adjust the doors vertically,
Loosen the fixing nut located at the bottom.
Rotate the adjusting nut according to the position
of the door (clockwise/counter-clockwise).
Tighten the fixing nut in order to fix the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the top.
Rotate the side adjusting nut according to the
position of the door (clockwise/counter-clockwise).
Tighten the fixing nut which is at the top in order to
fix the position.
!"#$%&'()*($&
À[LQJQXW
À[LQJQXW
!"#$%&'()*($&

12 / 30 EN Refrigerator / User Manual
Installation
3.4 Electric connection
AWARNING: Do not make connections via
extension cables or multi-plugs.
BWARNING: Damaged power cable must
be replaced by the Authorized Service
Agent.
CIf two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
tOur company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
tPower cable plug must be within easy reach
after installation.
tDo not extension cords or cordless multiple
outlets between your product and the wall
outlet.
-Upper hinge group is fixed with 3 screws.
-The hinge cover is attached after the sockets are
installed.
- Then the hinge cover is fixed with two screws.

13/ 30 EN Refrigerator / User Manual
4 Preparation tThawing the frozen foods in the fridge
compartment both saves energy and reserves
the quality of the foods.
CTemperature of the room where your
refrigerator is located should at least
be 10ºC /50°F. Operating your
refrigerator under cooler conditions is not
recommended with regard to its efficiency.
CInside of your refrigerator must be cleaned
thoroughly.
CIf two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
4.2 Recommendations about the
fresh food compartment
tMake sure that the food does not touch the
temperature sensor in fresh food compartment.
To allow the fresh food compartment to keep
its ideal storage temperature, the sensor must
not be hindered by food.
tDo not place hot foods or beverages inside the
product.
4.1 Things to be done for
saving energy
AConnecting your refrigerator to systems
that save energy is dangerous as they may
cause damage on the product.
tFor a freestanding appliance; ‘this refrigerating
appliance is not intended to be used as a built-
in appliance.
tDo not leave the doors of your refrigerator open
for a long time.
tDo not put hot food or drinks in your
refrigerator.
tDo not overload the refrigerator. Cooling
capacity will fall when the air circulation in the
refrigerator is hindered.
tDo not place the refrigerator in places subject
to direct sunlight. Install the product at least
30 cm away from heat sources such as hobs,
ovens, heater units and stoves and at least 5
cm away from electrical ovens.
tPay attention to store your food in refrigerator
in closed containers.
tTo be able store maximum food in the freezer
compartment of your refrigerator, the upper
drawer has to be removed and placed on top
of glass shelf. Power consumption stated for
your refrigerator has been determined after
removing the icematic and the upper drawers
as to allow maximum loading. It is strongly
recommended to use the lower drawers in the
freezer and the multizone compartment while
loading.
tSince hot and humid air will not directly
penetrate into your product when the doors
are not opened, your product will optimize
itself in conditions sufficient to protect your
food. Functions and components such as
compressor, fan, heater, defrost, lighting,
display and so on will operate according to
the needs to consume minimum energy under
these circumstances.
tAirflow should not be blocked by placing
foods in front of the freezer and the multizone
compartment fans. Foods should be loaded by
leaving minimum 5 cm space in front of the
protective fan grid.

14 / 30 EN Refrigerator / User Manual
Preparation
4.3 Initial use
Before using the product, make sure that all
preparations have been made in accordance
with the instructions given in the "Important
instructions regarding safety and environment" and
"Installation" chapters.
tClean the interior of the refrigerator as
recommended in the “Maintenance and
cleaning” section. Before you start the
refrigerator, make sure that the interior is dry.
tPlug the refrigerator in a grounded socket. The
interior illumination is lit when the door of the
refrigerator is opened.
tOperate the refrigerator for 6 hours without
placing any food in it and do not open its door
unless it is necessary.
CYou will hear a noise when the compressor
starts up. The liquids and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
CFront edges of the refrigerator may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.

15/ 30 EN Refrigerator / User Manual
5 Operating the product
CFigures in this user manual are schematic and may not match the product exactly. If the subject parts
are not included in the product you have purchased, then those parts are valid for other models.
5.1 Indicator panel
Touch-controlled indicator panel allows you to set the temperature and control the other functions related
to the refrigerator without opening the door of the product. Just press the relevant buttons for function
settings.
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
!" # $% &' ( !) !!
!"
&!#
!$
!%
!'
&!*
&!+
!(
")
"*
&"+
"(
#)
#!
#"
##
&#$,!&#$,"
Select
Quick FreezeQuick Cool
FN
OK
3 “
3 “
*&+
&"" "!
"#
"$
&"%
"'

16 / 30 EN Refrigerator / User Manual
Operating the product
1. Quick cooling function indicator
It turns on when the quick fridge function is
activated.
2. Fridge compartment temperature indicator
Temperature of the fridge compartment is shown;
it can be set to 8,7,6,5,4,3,2,1.
3. Fahrenheit indicator
It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.
4. Key lock
Press key lock button simultaneously for 3 sec-
onds. Key lock symbol
will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button simultaneously for 3
seconds again. Key lock symbol will turn off and
the key lock mode will be exited.
Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator.
5. Power failure/High temperature / error
warning
This indicator illuminates during power failure, high
temperature failures and error warnings. During
long-term power failures, the highest temperature
value that the freezer compartment reaches will
blink on the digital display. After checking the food
located in the freezer compartment, press the
alarm off button to clear the warning.
Please refer to "solutions recommended for
troubleshooting" section on your manual if you
observe that this indicator is illuminated.
6. Filter reset icon
This icon turns on when the filter needs to be
reset.
7. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
8. Joker freezer icon
Hover over the Joker freezer icon using the FN button; the
icon will start to flash. When you press the OK key, joker
cabin freezer icon turn on and operates as a freezer.
9. Freezer compartment temperature
indicator
Temperature of the fridge compartment is shown;
it can be set to -18, -19, -20, -21, -22, -23, -24.
10. Quick freeze function indicator
It turns on when the quick freeze function is
activated.
11. Fahrenheit indicator
It is a Fahrenheit indicator. When the Fahrenheit
indication is activated, the temperature set values
are shown in Fahrenheit and the relevant icon
turns on.
12. Quick freeze function button
Press this button to activate or deactivate the quick
freeze function. When you activate the function,
the freezer compartment will be cooled to a
temperature lower than the set value.
CUse the quick freeze function when you
want to quickly freeze the food placed
in freezer compartment. If you want
to freeze large amounts of fresh food,
activate this function before putting the
food into the product.
CIf you do not cancel it, Quick Freeze
will cancel itself automatically after 24
hours at the most or when the fridge
compartment reaches to the required
temperature.
CThis function is not recalled when
power restores after a power failure.
13. Filter reset
The filter is reset when the quick freeze button is
pressed for 3 seconds. Filter reset icon goes off.

17/ 30 EN Refrigerator / User Manual
Operating the product
14. FN button
Using this key, you can switch between the
functions that you want to select. Upon pressing
this key, the icon, whose function is required to be
activated or deactivated, and this icon's indicator
starts flashing. The FN button gets deactivated if
not pressed for 20 seconds. You need to press this
button to change the functions again.
15. Celsius indicator
It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.
16. OK button
After navigating the functions using the FN button,
when the function is cancelled via the OK button,
the relevant icon and the indicator flashes. When
the function is activated, it remains on. The
indicator continues to flash in order to show the
icon it is on.
17. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
18. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
19. Set increasing button
Select the relevant cabin with the select button;
the cabin icon representing the relevant cabin will
start to flash. If you press the set increasing button
during this process, the set value gets increased. If
you keep pressing it in a loop, the set value returns
to the beginning.
20. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
21. Setting the Celsius and Fahrenheit
indicator
Hover over this key using the FN key and select
Fahrenheit and Celsius via the OK key. When
the relevant temperature type is selected, the
Fahrenheit and Celsius indicator turns on.
22. Ice machine off icon
Press the FN key (until it reaches the ice icon and
the lower line) to switch off the ice machine. The
ice machine off icon and the ice machine function
indicator start flashing when you hover over them,
thus you can understand whether the ice machine
will be turned on or off. When you press the OK
button, the ice machine icon lights continuously
and the Indicator continues to flash during this
process. If you do not press any button after 20
seconds, the icon and the indicator remains on.
Thus, the ice machine is switched off. In order to
switch on the ice machine again, hover over the
icon and the indicator; thus, both the ice machine
off icon and the indicator will start flashing. If you
do not press any button within 20 seconds, the
icon and the indicator will go off and thus the ice
machine will be switched on again.
CIndicates whether the icematic is
on or off.
CWater flow from water tank
will stop when this function is
selected. However, ice made
previously can be taken from the
icematic.
23. Eco fuzzy function icon
Press the FN key (until it reaches the letter e
icon and the lower line) to activate the eco fuzzy.
When you hover over the eco fuzzy icon and the
eco fuzzy function indicator, they start flashing.
Thus, you can understand whether the eco fuzzy
function will be activated or deactivated. When you
press the OK button, the eco fuzzy function icon
lights continuously and the Indicator continues to
flash during this process. If you do not press any
button after 20 seconds, the icon and the indicator
remains on. Thus, the eco fuzzy function is
activated. In order to cancel the eco fuzzy function,

18 / 30 EN Refrigerator / User Manual
Operating the product
hover over the icon and the indicator again and
press the OK key. Thus, both the eco fuzzy function
icon and the indicator will start flashing. If you do
not press any button within 20 seconds, the icon
and the indicator will go off and the eco fuzzy
function will be cancelled.
24. Vacation function icon
Press the FN key (until it reaches the umbrella
icon and the lower line) to activate the vacation
function. When you hover over the vacation
function icon and the vacation function indicator,
they start flashing. Thus, you can understand
whether the vacation function will be activated or
deactivated. When you press the OK button, the
vacation function icon lights continuously and thus
the Vacation function is activated. The Indicator
continues to flash during this process. Press the
OK key to cancel the vacation function. Thus, both
the vacation function icon and the indicator will
start flashing and the vacation function will be
cancelled.
25. Joker fridge icon
When you select the joker fridge icon using the FN
button and press the OK key, the joker cabin turns
into a fridge cabin and operates as a cooler.
26. Celsius indicator
It is a Celsius indicator. When the Celsius indication
is activated, the temperature set values are shown
in Celsius and the relevant icon turns on.
27. Set decreasing function
Select the relevant cabin with the select button;
the cabin icon representing the relevant cabin
will start to flash. If you press the set decreasing
button during this process, the set value gets
decreased. If you keep pressing it in a loop, the set
value returns to the beginning.
28. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
29. Temperature change cabin icon
Indicates the cabin whose temperature is to be
changed. When the temperature change cabin icon
starts flashing, it is understood that the relevant
cabin has been selected.
30. Key lock
Press key lock button simultaneously for 3 sec-
onds. Key lock symbol
will light up and key lock mode will be activated.
Buttons will not function if the Key lock mode is
active. Press key lock button simultaneously for 3
seconds again. Key lock symbol will turn off and
the key lock mode will be exited.
Press the key lock button if you want to prevent
changing of the temperature setting of the
refrigerator.
31.Select button
Use this button to select the cabin whose tem-
perature you want to change. Switch between
the cabins by pressing this button. The selected
cabin can be understood from the cabin icons
(7,17,18,20,28,29). Whichever cabin icon is flash-
ing, the cabin, whose temperature set value you
want to change, is selected. Then, you can change
the set value by pressing the cabin set value
decreasing button (27) and the cabin set value in-
creasing button (19). If you do not press the select
button for 20 seconds, the cabin icons will go off.
You need to press this key to select a cabin again.
32. Alarm off warning
In case of power failure/high temperature
alarm, after checking the foods in the freezer
compartment, press the alarm off button to clear
the warning.
33. Quick cooling function button
The button has two functions. To activate or
deactivate the quick cool function, press it briefly.
Quick Cool indicator will turn off and the product
will return to its normal settings.

19/ 30 EN Refrigerator / User Manual
Operating the product
CUse quick cooling function when you
want to quickly cool the food placed
in the fridge compartment. If you want
to cool large amounts of fresh food,
activate this function before putting the
food into the product.
CIf you do not cancel it, quick cooling
will cancel itself automatically after 1
hours at the most or when the fridge
compartment reaches to the required
temperature.
CIf you press the quick cooling button
repeatedly with short intervals, the
electronic circuit protection will be
activated and the compressor will not
start up immediately.
CThis function is not recalled when
power restores after a power failure.
34. 1 Joker temperature indicator
Temperature set values of the joker cabin are
displayed.
34. 2 Wine cooler compartment tempature
indicator
Tempature set values of the winecabin are dis-
played.