
13 EN
Auxiliary function selection
Selectthedesiredauxiliaryfunctionsbefore
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that are
suitabletotherunningprogrammebypressingthe
Start/Pause/Cancelbuttonwhenthemachineis
operating.Forthis,themachinemustbeinastep
beforetheauxiliaryfunctionyouaregoingtoselect
or cancel.
Dependingontheprogramme,pressa,b,cor
dbuttonstoselectthedesiredauxiliaryfunction.
Symboloftheselectedauxiliaryfunctionappears
on the display.
C Somefunctionscannotbeselectedtogether.
Ifasecondauxiliaryfunctionconflictingwith
thefirstoneisselectedbeforestartingthe
machine,thefunctionselectedfirstwillbe
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
haveselectedthePrewash,Prewashwillbe
canceled and Quick Wash will remain active.
C Anauxiliaryfunctionthatisnotcompatible
withtheprogrammecannotbeselected.(See
“Programmeandconsumptiontable”)
C AuxiliaryFunctionbuttonsmayvaryaccording
to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
F1 appears on the display when you select this
function (a).
• Quick Wash
ThisfunctioncanbeusedinCottonsand
Syntheticsprogrammes.Itdecreasesthewashing
timesandalsothenumberofrinsingstepsfor
lightly soiled laundry.
F2 appears on the display when you select this
function(b).
CWhen you select this function, load your
machine with half of the maximum laundry
specifiedintheprogrammetable.
• Rinse Plus
Thisfunctionenablesthemachinetomake
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins(babies,allergicskins,etc.)tobeeffectedby
the minimal detergent remnants on the laundry can
bereduced.
F3 appears on the display when you select this
function (c).
• Anti-Creasing
This function creases the clothes lesser when they
arebeingwashed.Drummovementisreduced
and spinning speed is limited to prevent creasing.
Inaddition,washingisdonewithahigherwater
level.
F4 appears on the display when you select this
function (d).
• Rinse Hold
Ifyouarenotgoingtounloadyourclothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in the
machine.PressStart/Pause/Cancelbuttonafter
this process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
Ifyouwanttospinthelaundryheldinwater,adjust
the Spin Speed and press Start / Pause / Cancel
button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
• Soaking
TheSoakingauxiliaryfunctionensuresbetter
removalofstainsingrainedintotheclothesby
holding them in the detergent water prior to startup
of the programme.
• Pet hair removal
This function helps to remove pet hair that remain
on your garments more effectively.
When you select this function, Prewash and Extra
Rinse steps are added to the normal programme.
Thus, washing is performed with more water (30%)
and the pet hair is removed more effectively.
ANever wash your pets in the washing
machine.
Time display
Remaining time to complete the programme
appears on the display while the programme is
running. Tim is displayed as “01:30” in hours and
minutes format.
CProgramme time may differ from the values
in the “Programme and consumption
table”dependingonthewaterpressure,
waterhardnessandtemperature,ambient
temperature, amount and the type of laundry,
auxiliary functions selected and the changes
at the mains voltage.
Delayed start
WiththeDelayedStartfunctionthestartupof
theprogrammemaybedelayedupto24hours.
Delayedstarttimecanbeincreasedbyincrements
of 30 minutes.
C Donotuseliquiddetergentswhenyouset
DelayedStart!Thereistheriskofstainingof
the clothes.
Opentheloadingdoor,placethelaundryandput
detergent, etc. Select the washing programme,
temperature,spinspeedand,ifrequired,the
auxiliary functions. Set the desired delayed start
timebypressingtheDelayedStart+or-buttons.
DelayedStartsymbolflashes.PressStart/Pause
/Cancelbutton.Delayedstartcountdownstarts.
DelayedStartsymbolilluminatessteadily.Start
symbolappears.“:”signinthemiddleofthe
delayed start time on the display starts flashing.