Beko WTAU12AW User manual

WTAU12AW

Notes
12
Safety and precautions
Observe the following items in order to prevent from injuring yourself,
others and the damage of property:
Please observe following contents of graphics.
！
Warning This indicates serious injury or death to human
being may be caused.
Caution This will remind you that injury to people and
damage to property may occur.
！
This graphics represents(cause attention),and detailed
cautions will be displayed inside the graphics.
！
This graphics represents (operation prohibited), and detailed
prohibitive items will be displayed inside the graphics.
This graphic represents (forcible execution), and detailed
forcible execution items will be displayed inside the graphics.
！
Warning
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack knowledge, unless they have been
of experience and
given supervision or instruction concerning
use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play
with the appliance.
The new hose-sets supplied with the appliance are to be
used and the old hose-sets should not be reused.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
The openings must not be obstructed by a carpet.
This appliance is for indoor use only.
Do not put washing machine at humid place.
Hands shall not be inserted into running spin-dry tub .
If the spin-dry tub does not stop within 15 seconds after
opening the cover , please stop using the machine and
have it repaired.
2
6
7
8
11
12
13
15
17
18
Contents
Safety and precautions........................................................................
Installation of the washer......................................................................
Preparation before washing..................................................................
Parts identification of the washer...........................................................
Instruction of the washer operation panel...............................................
Quick start..........................................................................................
The main wash....................................................................................
Special features..................................................................................
About the procedure of full automatic wash program..................................
Cleaning and Maintenance of the washing machine..............................................
Identify usual trouble of washer..............................................................................
Malfunction display and solutions..........................................................
Technical specifications................................................................................
9
19
20

！
Regularly clean the power plug to
remove dust and dirt to avoid contact
failure.
!
Please do not let children climb the
machine or peer into the rotating
spin barrel to avoid accidents.
Prohibited
It is prohibited to wash the clothes
touching with kerosene, gasoline,
alcohol and other flammable materials.
Prohibited
Warning
34
Please do not install the machine in
damp and raining environment to avoid
electric shocking, catching fire, faults
and distortion
accidents.
No dampness
小天鹅
Please do not directly rinse the
machine with water when
cleaning.
No rinsing
小天鹅
No dismantling
Please do not disassembly
and assembly the
machine without
authorization.
No touching
Please do not insert your hand
and take out clothes inside the
spin barrel before
it is fully stopped.
Please do not damage power flexible
cord and power plug to avoid electric
shocking, short circuit and catching
fire.
Prohibited
Please well connect the earth line of
socket to avoid electric shocking by
accidental leakage.
（earthing）
Earthing
小天鹅
Smoke and fire prohibited
Please do not place on the washer
burning candle, mosquito-repellent
incense, cigarette and other
flammable things, as well
as electric stove, air
heating fan and other
heating
sources.
Please pull out plug from the socket
if the machine is not in use.
Pull out the plug
Please insert the power plug tightly.
!
Please use correct power source.
!
Please do not pull out or insert the
plug with wet hands to avoid electric
shocking.
Wet hands are
prohibited
Safety and precautions Safety and precautions
！
Warning

55 6666
Installation of the washer
Installation of the washer
It is strictly prohibited to place
children or lay
weights on the
washer.
小天鹅
Prohibited
Please do not pull the electric cord
when pulling out the
plug.
!
Prohibited
Do not replace power cord
by yourself.
小天鹅
Prohibited
Do not fill the tub with water manually.
Please do not wash down jacket,
raincoat, fishing coat and similar
clothes in the
washer.
Prohibited
Please ensure that the water inlet pipe
is connected and the tap is opened
before washing
clothes.
!
！
Warning
Installation of water inlet pipe
Put the water inlet pipe(which has
metallic filtering bag) screw on to the tap.
Tightly screw another end of water
inlet hose on water inlet valve .
(with rubber seal ring inside).
Note: When tightening the
clamping nut, evenly apply the
force and do not twist the water
inlet valve to avoid breaking of
water inlet valve joint.
Water inlet hose
Clamping nut
Remove package
Remove package and take out the bottom board of
the cabinet on the foam cover.
Open the lid of washer's door and take out accessories.
A trial operation or washing on the foamed cushion
is strictly forbidden.
Base foamed cushion
The height of drain hose (“a”)should between 86-100 cm.
Diameter of “b”shuld not less than 3 cm, and flow capacity
not less than 40 L/Min.
86~100 cm
Before washing machine starts, user should hang up the
drain pipe 86-100cm height from the floor.
Placement of upper water drain hose
Safety and precautions

8
Parts identification of the washer
Preparation before washing
7
Adjust the adjustable foot to make
the washer be placed stable.
1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer barrel
will incline and knock the cabinet)
Connect with to
power source.
3
4
Put in
clothes
and
suitable
amount of
washing
powder.
6
Install the water
inlet hose.
2
Turn on the
water supply.
Put down the drain
hose.
5
Note:
Before washing machine starts, user should fix
drain pump at the outlet place about 86-100cm
high to hang the pipe.
Accessories
Water inlet hose assembly Base cover
Self-tapping screw
Please refer to the real material as the attachment
Cold (blue)Hot (red)
Name Of Parts
Before washing, please do take out coins,
keys and other hard goods, and zip up clothes
and barrel from damage.
！
NOTICE
tightly to prevent them
86~100 cm
Power line
Cabinet
Control panel
Top lid
Upper drain hose
Adjustable foot knob
Handle
Water inlet valve
Filter support
Impeller
Washing powder area
Detergent area

910
！
If the drawing is changed, no information anymore.
To protect the control panel, the interval time of power on and off should be not less than 30 seconds.
910
Instruction of the washer operation panel
3.WaterLevel Selection: 2.Start / Pause
4.Function
5.Child Lock
6.Delay: 7.Program Selection:
Long press “Delay”button,every 1s will increase 1 hour , and also have
a beep once, when after reach to 24 hours, it will return to the initial state.
After "delay"starts(do not press "child lock"button),consumer can review
the set programs when press "delay" button again. When "delay"starts, there
will be an"delay alarm"if consumer open the lid, and if consumer close the lid,
this alarm will be released. But while the machine is running, if consumer
open the lid , there will be "E3"alarm. Detailed usage, consumer can refer to
the description of "special function-delay function".
Before starting, continuously press this
button to select the corresponding program:
[Normal], [Soft], [Soak], [Strong]
[Quick],[Memory], [Air dry], [Tub Clean].
Press [Start/Pause]button to start the
program, then press [Wash] &
[Rinse] button at same time to start
the child lock function, it can lock the
selected program to avoid any
unnecessary troubles while children
made the faulty operation. If
consumer wants to close this function,
they can re-press [Rinse]&[Wash]
button at the same time.
1.Power Supply:
[ON/OFF] button has function of
open or close the power supply.
[Start / Pause] button has both
function of startand pause.
Continuously press this button, the
machine will be switched between
start and pause mode.
Before washing,consumer can select the water level
according to the dirty degree,material or weight of
clothes.The detailed usage,consumer can refer to
"The relationship between the water level and load.
8.FCS function
89
9.Temperature:
Press the button to select different
temperature water for wash.
2
4
6
8
1
3
5
7
ON/OFF
FCS(Fast Clean System)
Start up Fast Clean Stystem: Power on,
select “Normal",”Soft","Soak","Strong"
program,then press FCS button. then press
“Start/Pause” button, FCS function starts up.
The relative figures will be showed after FCS
function starts up.
Cancellation of FCS function: when the FCS
function was selected, The function can be
cancelled by pressing any button except
“Temperature”,“Water level”,“Delay”,or
power off.
After start, one light will flash
among the function of wash,
rinse and spin according to real
process.
Water

11 12
Detailed Steps:
Main Functions:
1 Install the washing
machine
3 Measure out the
detergent 7 Plug the power supply
8 Select the desired
program
5 Put down (hang up)
the drain pipe
4 Close the top lid
9 Press the
[start/pause] key
11
1.Press [ON/OFF] button;
2.Select the water level according to the washing load;
3.Press [Start/Pause] button.
2 Load the laundry
12
Quick start
6 Turn on water supply
The main wash
! .Close the top lid when machine is running , otherwise, it will
automatically pause for working and send out abnormal warning.
during spin process
! .The washer will not work when the filled water does not reach the set water level.
NOTICE
！
Alarm function when door opened:
1. When washing or spinning,there will be E3 alarm while consumer open the lid,and if
consumer close the lid,the alarm will be released,and to continue to run the previous
program which before consumer open the lid.
2. When "Delay" starts,there will be "Delay" E3 alarm while consumer open the lid,and if
consumer close the lid,the alarm will be released,and to continue the "Delay"function.
But while the machine is running,if consumer open the lid,there will be no alarm.
When washing process finished:
1. The buzzer will buzz continuously for 6 times and then the power will be automatically cut
off;
2. Turn off the water tap.
3. Although the power can be cut off automatically, the power plug must be pull out as well
for the safety.
Program Selection:
1. Press [ON/OFF] button;
2. Select the water level and program;
3. Press [Start/Pause] button.
Preparation:
1.Put down the drain pipe;
2.Connect the inlet pipe,turn on the tap;
3.Put the plug of the power strip into the socket;
4.Take out the coins and other things from the pocket,shake off the sediment of the clothes.
Clothes Washing Skills:
1. While washing the clothes which are easily damaged,consumer can put those clothes
into the mesh bag,and then take the washing process;
2. For the big size or easily floated clothes,should be put into the tub first;
3. For the easily pilling clothes,consumer should turn inside out the reverse side clothes,
and then take the washing process;
4. While washing the clothes which have strap or zipper,consumer should tie the strap and
zip the zipper well.
5. Remove the sediment before washing;
6. For the especially dirty parts,consumer can scrub with detergent first.

13 14
Special features
Delay:
Press the “DELAY” button each time, the
number on the digital indication adds by
“1”;After the number reaches “24”,press
the “DELAY”button each time,the number
adds by“6”;After the number reaches 48,
the light of delay time is turned off, and
the delay program return to original status.
Special features
Child Lock:
1. This function is effective only after program starts;
2. Press [Start/Pause]button to start the program, then press [Rinse] & [Wash] button at
time to start the child lock function. If consumer wants to close this function, they
[Rinse]&[Wash]button at the same time.
3. When "child lock"started,if open the lid during the running process, there will be an alarm.
Open the lid within 20s,there will be a "E3"alarm,if close the lid within 20s,the alarm will be
released, and continue to run the previous program which before opening the lid. If the lid
opened after 20s,the display will show"CL" alarm named "normal failure alarm",the drain
valve will be opened. after the water drained lasting for 90s,the drain valve will be closed.
During this process, the alarm still can not be released. The normal alarm will be happened
every 15 mins, consumer can power off the machine or unplug to release this alarm.
same
can re-press
Fuzzy weighting function:
1. Press ON/OFF button
2. Turn on the tap, put down the drain pipe.
3. Put in the washing load and detergent(Do not sprinkle the detergent on the clothes directly,
to avoid the clothes' color fading),close the lid.
4. Select “Normal”、“ ”、“ ” program. The washing machine will select the water
level automatically according to the load weight.
5. Press [Start/Pause] button to run fuzzy weighting function.
Notice:
1. When there's water in the tub, this function is not available.
2. This function can be only applied under the programs of “Normal”、“Soft”、“Strong”.
3. Before press [Start/Pause] button, if consumer selected the water level, there will be no
fuzzy weighting function.
4. After press [Start/Pause] button, the washing machine will run the fuzzy weighting function.
Consumer can also select the water level to set the water level as needed.
“ ” .
Soft Strong
Self Power off function:
1. If the machine do not start to work within 10 minutes after powered on, it will power off
automatically.
2. After end of operation and the buzzer sounding 6 times, it will power off automatically.
Unbalance Control:
1. During the spin process, and under the condition of safety switch connected, if the sudden
break happened, the washing machine will come into the unbalance adjustment situation;
2. While coming into the unbalance adjustment process, the rinsing LED flashed, inlet the
water to reach to the set level, adjust the clothes' status, drain after finished rinsing, and
return to the normal spinning process. If it is not effective after 3 times' adjustment, there
will be an alarm.
Power failure memory function
If the power supply becomes off suddenly during operation , the machine remembers
the current operation state . When power is on ,the machine returns to former operation
state automatically.
Delay time means the preset beginning
time of washing.
2. Open the tap and lay the drain hose.
3. Put in the laundry and detergent.
Delay time program
Confirmation of the delay and inspection
1. After the delay function is started, digital tube will display the flashing of delay time, and
other lights are turned off.
2. After the delay function is started , press “ Delay” button continuously , you may inspect
the preset program and function . Loose the button , the program return to delay status.
Cancel the delay time, or alternate the delay time
2. To change the delay time , cancel the delay time first, and then press “Delay” button to reset.
1. Switch on the power .
4. Select the propre water level according
to the quantity of clothes.
5. Select the functions and programs.
6. Press “DELAY” button to select the
beginning time of washing.
7. Close the lid and press “START/PAUSE”
button
1. Press “Power” button to cancel the delay time.
After power on, push “start/pause”button directly to One-key Washing. The function will be canceled
if other buttons, such as water level, program, temperature and function are pressed before. It will also
be invalid if there is water left in the inner tube, and the program will be directly set into
Washing Machine will perform fuzzy detection immediately by pushing “start/pause” after power on
and water level and program will be selected according to amount of clothing. During the selecting,
water level lamp is flashing continuously, as digital display shows “--”,at the same time, only power
button is effective.
Program will
run automatically when checked out and finished program and water level setting.
Normal with default water level 6.
After detecting is completed, program is chosen to “Quick” with automatically setting
water level 1/2/3,and “Normal”with water level 4/5/6,also, “Soak” with water level 7/8.
One Touch System
Instruction to single wash procedure
1. User may freely select any single procedure, or any combination of procedures
RINSE and SPIN according to the actual requirements. It is only required to turn off any one
or two of these three indicators that not needed by the user. And keep the indicator be on
showing the process needed by the user.
2. Single wash -- after switching on the power, turn off RINSE and SPIN two indicators by pressing
function button. The operation for single rinse and single spin is similar.
3. Single wash-spin – after switching on the power, turn off RINSE indicator by pressing function
button. The operation for single rinse-spin and single wash-rinse is similar.
among WASH,
Remain(M)
Delay(H)

15 16
About the procedure of full automatic wash program
Normal
Normal fabric washing program, suitable to wash ramie cotton fabric. Wash for once, rinsing
for twice, the spin time is a little long.
Quick:
Suitable to wash light stained clothes and clothes in summer.
Memory:
Soft:
Mid/High/Low water level selection, the tempo is soft, slow washing and spinning speed,
make the lightest wear and deformation.to
Soak:
Suitable to wash more dirtier clothes, there's 54 additional soaking time during the
washing process.
minutes
Strong:
The wash time is longer, the stream is stronger, so the washing effect is better.
Air dry:
By the intermittent spinning, clean the dirt of inner & outer tub and impeller.
Tub Clean:
About the procedure of full automatic wash program
Program Wash time Rinse times Spin time Total time
Normal
Strong
Soft
Soak
Quick
2 times 62 minutes
65 minutes
2H
55 minutes
30 minutes
2 times
2 times
Memory
1 times
2 times
62 minutes7 minutes
Air Dry
Tub Clean
2 times
63 minutes
F
3 minutes
60 minutes
8 minutes
9 minutes
6 minutes
5 minutes
7 minutes
18 minutes
6 minutes
18 minutes
20 minutes
Soak54 minutes
Wash 10 minutes
12 minutes
/
20 minutes
1 times
Water level
4
6
6
8
6
7
8
// /
Memory procedure, It can remember all the washing parameters which users have
set up, such as water level, washing time, rinsing times etc. Memory procedure is
effective after you press the start/pause button, next start when you choose the
Memory procedure, You can see all the state which you choose last time.
As for not easily fading ,deforming , and non-waterproof clothes , can use the function to
dry clothes without heating, and to reach the result of being dried in a room.
The total time included the time of entering water and the drain time .It can be
affected by the pressure of the tap water in your family and the drain speed.
During jeans program, hot and cold water inject at the same time as default.
Note:
During oak washing program, it is identified as Saudi Arabia Efficiency Program
as followed: washing processes , and soak for mins, and rinse for
times and then spin mins.
S
10 54
9
minutes 2
Efficiency Program
Water level
3
21 478
Water level
Water volume
Weight of laundry
56
25L 33L 56L 64L
49L42L 80L 85L
≤1.0kg ≤2.5kg ≤5.5kg ≤8.5kg ≤10.0kg≤4.0kg ≤12.0kg≤7.0kg

Note: During the de spin process, if washing are piled at one side of the spin barrel,
it will cause unbalance of spin barrel resulting in striking. At this moment, the
computer inside the washer will feel this unbalance phenomenon and will automatically
correct it ( fill in water Washing ). However, if unbalance situation is not removed after
continuous three corrections, which means the computer auto-correction can not
resolve the problem. Then the user has to manually and evenly place the clothing
inside the barrel to solve the problem.
No
washing
Abnormal
draining
Abnormal
spin
List of faults and inspection
Faults Inspection Items
No water
flows in
If the power is off or the fuse is burned out.
If the water supply is cut off or the water pressure is too low.
If the inlet hose is properly connected and the water tap is opened.
If the filtering screen of inlet valve is blocked by dirt.
If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
If the "Start / Pause" button is pressed after the power
switch is pressed.
If the door lid is closed.
If all clothing piled largely at one side of barrel or the clothing
is excessively placed.
If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
If the motor belt is loosened.
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine without
permission.
If the washer can not work normally, or appear abnormity or alarms, please check and
correct as follows.
If the water drain hose is placed very high.
If the end of water drain hose is sealed in pond.
If the internal rubber ring of drain valve is blocked by dirt.
If the power is off or the fuse is burned out.
If the power supply voltage is too low.
If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
If it is set to “Delay” washing mode. (It will only start to work
until the reservation time reached)
Identify usual trouble of washer
17 18
Identify usual trouble of washer
Cleaning and Maintenance of the washing machine
End of program
The washing machine will send off the
sound of “dou-dou” at the end of any
program operation to remind you to take
out the laundry or operate it again.
After the sound, the washing machine
returns to its power-off state with no
display and all lights off.
Please shut off the tap, pull out the plug
when not in use to avoid water leakage or
the fire accidents.
Maintenance
Use gentle clothing to wipe off the water and
dirt on the surface each time after using the
washing machine. Detergent, propellant and
other chemicals are not allowed
to use so as to avoid any
damage to the plastic
accessories.
Clean the water inlet Clean Of the filter
After long time use, the water inlet mesh
bag may be blocked with smudginess, and
should be cleaned according to the
following steps:
1.Switch on the power, followed by shutting
off the tap.
2.Let the washer works for 5 seconds so
that water flows into the tub through the
water inlet hose. then turn off the power.
3.Unload the water inlet hose and clean
the mesh bag, then restore the water inlet
assembly.
After using the washing machine for a
period, please clean it according to the
following steps:
1.Take off the lint filter.
2.Turn over the mesh bag and wash it
clean in the water.
3.Restore it and fix it.
Cleaning and Maintenance of the washing machine
Note:If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
1. Drain the water out of the
pump, under which use a
container to collect.
2. Loosen the pump
cover anticlockwise.
3. Take out the lint filter.
4. Clean the filter. 5. Restore it and adjust
the convex place to align
at the pump hole.
6. Tighten the pump cover
clockwise.
Clean the lint filter in the drain pump (only for having drain filter)

19
Technical specifications
Technical specifications
MADE IN CHINA
Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service
department of our company and the customer should not dismantle the machine.
If the washer can not work normally, and the abnormal indication is shown in the digital
display window or the machine alarms, please check and correct them as follows.
Malfunction display and solutions
Overall dimensions 601X630X1000(mm)
Rated input power 600W
Motor rated input power 600W
Pump rated input power 45W
Water volume 85L
Rated washing capacity 12.0kg
Net weight 46kg
Rated voltage
Rated frequency 50Hz
Water pressure 0.1MPa~0.6MPa
Grade of waterproof IPX4
Standard program water consumption 220L
220V~
20
Falut Cause of fault Indication Alarm of the
buzzing sound
Drain Alarm
Alarm for
opening lid
Imbalance
Alarm
Water injection for about
1 hour, but do not reach
preset water level.
“E1”flares
“E2”flares
“E3”flares
“E4”flares
The buzzer goes
on buzzing for 10
seconds. If the
fault is not solved,
buzzes again for
10 seconds in
every 15minutes.
Open the lid to
deal with faults,
then close the
lid to stop the
alarm.
Alarm for
water inlet
Checked imbalance for
the third time.
Stopping alarm
Drain off water 10 mins not
arrive at empty water level.
Note:The program which has E4 alarm when shocked in the first time is “Air dry” and Tub clean”.“
While spinning or delay
function starts, there will
be an alarm if open the lid,
and only to be suspended
without alar m i n g in the
spinning process.