manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Bel Canto
  6. •
  7. Amplifier
  8. •
  9. Bel Canto e.One C5i User manual

Bel Canto e.One C5i User manual

TM
TM
C5i
Inte g r a t e d Ampl i f i e r / Aud i o D A C
with M a s t e r Ref e r e n c e U ltr a - C l o c k
T A B L E O F C O N T E N T S
Safety Information ……………………………………………………………………………………2
Certifications/Standards ……………………………………………………………………………………3
Warranty ………………………………………………………………………………………………
Unpacking ………………………………………………………………………………………………
Power Connection ……………………………………………………………………………………
Setup and Placement ……………………………………………………………………………………5
Design Features ……………………………………………………………………………………5
Control Functions and Display …………………………………………………………………………6
Conditioning ………………………………………………………………………………………………6
Remote Control ………………………………………………………………………………………………7
Rear Panel Connections ……………………………………………………………………………………8
Tips for Operation ……………………………………………………………………………………9
Specifications ………………………………………………………………………………………………10
Copyright © 2011 Bel Canto Design Ltd.
Bel Canto Design Limited
221 North 1
st
Street
Minneapolis, MN 55 01
United States
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Bel Canto
Design. The content of this manual is provided for information use only, is subject to change without notice, and should not be
construed as a commitment by Bel Canto Design Limited. Bel Canto Design Limited assumes no responsibility or liability for
any errors or inaccuracies that may appear in this manual. Trademarks used in this publication: Bel Canto and the Bel Canto
logo are registered trademarks of Bel Canto Design Limited. C5i and Master Reference Ultra-Clock are trademarks of Bel
Canto Design Limited. Bel Canto Design Limited disclaims any proprietary interest in trademarks and trade names other than
its own. Printed in the United States.
The Lightning Flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product
enclosure that may be of sufficient magnitude
to constitute a risk of shock to persons.
Explanation of symbols used in this manual or on the
rear/underside of the apparatus:
TO COMPLETELY DISCONNECT THIS APPARATUS
FROM THE AC MAINS, DISCONNECT THE POWER
SUPPLY CORD PLUG FROM THE AC RECEPTACLE.
THE MAINS PLUG OF THE POWER SUPPLY CORD
SHALL REMAIN READILY ACCESSIBLE.
Disconnect supply cord before changing fuse.
Refer servicing to qualified service personnel.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD
NOT BE PLACED ON THIS APPARATUS.
• Read, keep and follow these instructions.
• Heed all warnings.
• Do not use the apparatus near water, ie near a
bathtub, kitchen sink, laundry tub, in a wet
basement, near a swimming pool etc.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in
accordance with the Manufacturer’s instructions.
Site the apparatus so that its location or position
does not interfere with its proper ventilation. For
example, the apparatus should not be situated on
a bed, sofa, rug, or similar surface that may block
the ventilation openings, or placed in a built in
installation such as a bookcase or cabinet that
may impede the flow of air through the ventilation
openings.
• Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus that produce heat.
• Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong is provided for your safety. If the provided
plug does not fit into your outlet; consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and at the point where they exit from
the apparatus.
• Unplug this apparatus during lightning storms or
when unused for long periods of time.
• Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug has been damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
• Mains plug: Use the mains plug to disconnect the
apparatus from the mains supply. The mains plug
must be accessible at all times. Use the mains
switch (if applicable) when the apparatus is not in
use.
• Objects and liquid entry: Do not let objects or
liquids fall into the apparatus. Do not expose the
apparatus to dripping or splashing. Do not place
a vessel containing liquid on top of the apparatus.
• No naked flame sources, such as lighted
candles, should be placed on the apparatus.
• The apparatus has been designed for use in
moderate and tropical climates
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
Fuse replacement:
This appliance is fitted with a non-rewireable 10 amp
mains plug. The plug contains a 10 amp fuse. If the fuse
has blown it can be replaced as follows:
a) Pull out the black fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 10 amp BS1362 approved fuse into the carrier
and push the carrier back into the plug.
Always ensure the fuse cover is fitted. If the fuse cover is
missing do not use the plug. Contact your Bel Canto
retailer to obtain a replacement fuse cover. Fuses are for
fire protection and do not protect against electric shock.
WARNING: THIS APPLIANCE MUST BE
GROUNDED.
Bel Canto Design Ltd. declare that this product is in conformance
with the Low Voltage Directive 73/23/EEC and Electromagnetic
Compatibility 89/336/EEC as amended by 92/31/EEC and
93/68/EEC.
The conformity of the designated product with the provisions of
Directive number 73/23/EEC (LVD) is proved by full compliance
with the following standards:
EN60065 2002 General requirements
The conformity of the designated product with the provisions of
Directive number 89/336/EEC (EMC) is proved by full compliance
with the following standards:
EN55013 2001 Conducted emissions
EN55013 2001 Absorbed emissions
EN55020 2002 Immunity
The conformity of the designated product with the provisions of
Directive number 2005/32/EC ecodesign requirements is proved
by full compliance with the ‘off mode’ setting power of 0.0 Watts.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor.
Register online (http://www.belcantodesign.com/Belcanto_Warranty.html) within 30 days of purchase from an
authorized dealer to automatically extend your warranty for 2 years starting from the date of purchase. If you do
not have web access, please contact your dealer for assistance. Upon fully completing registration, within 5
business days you will receive an email that officially validates your warranty. Your information will be used for
internal use only and will not be sold or released outside Bel Canto. Your comments and suggestions are
appreciated and help us continually improve our products and services.
The warranty is only valid to the original owner and is non-transferable. Damage caused by unauthorized
modification, abuse, or neglect of product will void your warranty. Any cost associated with return of product is
the sole responsibility of the owner. All returns require a return authorization number issued after completing the
RMA form in the support section of our website. If you have any questions, please feel free to contact us online at
info@belcantodesign.com.
C5i packaging contains the following:
1 (one) – C5i
1 (one) – C5i User’s Guide
1 (one) – Power Cord
1 (one) – Remote Control
Carefully unpack each piece and check for shipping
damage. If there is any damage, or if anything is
missing, please contact your dealer, distributor or
Bel Canto Design.
IMPORTANT: Save all packing materials as they
are specially designed to protect the unit during
transportation or shipping. If the packing becomes
lost or damaged, please contact your dealer,
distributor or Bel Canto before attempting to
transport your unit
.
The power supply on the C5i is preset for the proper
power voltage. The power cable should have the
correct plug for your local power system. If you
believe this to not be true, please contact your
dealer immediately.
This product, like any electrical component, can be
dangerous and cause injury unless correct handling
procedures are observed and used. Before
powering this product, it is necessary to read and
follow proper setup and procedures.
WAR I G!
Do not connect power
to this product yet!
Because the C5i runs cool, it can be placed in many
system locations without compromise. We do not
recommend placing weights or other objects directly
on the C5i.
This may scratch or mar the chassis finish. Do not
use harsh chemicals when cleaning the outside of
your C5i.
Digital Inputs:
• 2-SPDIF 2 /192
• 2-TOSLINK 2 /192
• USB 2 /96
Analog Inputs:
• MM Phono
• Line Level 2.5Vrms Max
Outputs:
• Line Level Out
• Loudspeaker Outputs
• ¼” Front Headphone Jack
The C5i is brings remarkable clarity and power to a compact and versatile platform. With 5 digital inputs, including
a high resolution USB input, MM Phono and a Line level input the C5i is a complete core for a high performance
entertainment system. Just add a Mac Mini or other computer, a turntable and pair of high quality loudspeakers
and you have a complete entertainment system.
All digital inputs are processed through our low jitter Master Reference Ultra-Clock circuitry to ensure the best
sound quality form all possible sources. The analog section is equally over specified with a 300 mA buffer to drive
the lowest impedance headphones or the internal analog switching amplifier. The amplifier retains the high
dynamic range as the line level section. A zero loss 2 bit digital level control completes the package to ensure
that no information is lost, retaining full clarity and dynamic impact.
The C5i uses 3rd generation switching amplifiers for lower high frequency distortion, increased clarity and better
high frequency extension. The C5i delivers 120 watts into ohm loads per channel or 60W @ 8 ohms per
channel.
IMPORTA T!
Make all connections before
powering your unit!
Upon Power Up:
When switched on, the C5i will display its software
revision. The SP1 input will be selected and Soft
Mute will be active. The volume will be set to 50.0.
Front Panel Control Knob:
The control knob is a continuously rotating control
with a push-switch function. Always push the button
with your finger in the direct center of the knob.
Pushing the knob will switch between selectable
values on the display. Rotating the control left or
right will adjust the selected value.
Volume Control:
The C5i allows you to change volume level by
rotating the knob. The volume down function
(counter-clockwise rotation) is very rapid and allows
quick changes in the volume level. Volume up
(clockwise rotation) functions rapidly up to a
displayed volume level of 65.0. It then continues
slowly to a maximum of 100.0.
Input Selection Mode:
Pressing the control knob in briefly will toggle into
the input selection mode. The selected input will be
displayed for 5 seconds. During this time you can
rotate the control knob to scroll to the desired input.
Pressing the knob again will select the indicated
input. The volume level will automatically ramp down
and up during this selection process. If the control
knob is not pressed for 3 seconds, the indicated
input will automatically be selected and the C5i will
return to the default volume control mode. Inputs are
indicated as: SP1 (SPDIF1), SP2 (SPDIF2), OP1
(TOSLINK), OP2 (TOSLINK), USB, LIn (Line In) and
PH (Phono).
Front Panel Digital Lock Indicator:
When no digital input signal is present on a selected
input, the first decimal point on the display will blink
on and off. For example the display will show: .65.0
and the first decimal point will be slowly blinking. If
this occurs, check that the correct input is selected
and then check that the digital source is connected,
active and functioning correctly. Once a digital
signal is present, the first decimal point will remain
constantly lit.
The sonic performance of the C5i will begin to stabilize after 100 hours of continuous power up.
The C5i Remote Control has a comprehensive
set of control features that are not available on the
front panel.
To access all C5i control features press the
button marked PRE on the remote control. The
Main CD controls will still operate in the DAC,
PRE and Tuner modes.
Display: Toggles through several display options:
1. Normal mode with Level Displayed
2. Input Sample Rate Displayed for several
seconds, example .1 or 96 or LOS
indicating Loss of Signal or no digital input
detected.
3. Display Off: Turns off the display. Display
comes on for several seconds whenever a
status change is detected
Mute: When in variable output mode this will switch
the analog output mode from Soft to Hard Mute to
Un-muted. Soft mute is indicated by two decimal
points in the far right of the display. Hard mute is
indicated by 3 decimals on the display. The Mute
function will punch through to any Bel Canto unit set
in Variable Output mode.
VOL+: Increases the volume setting in Variable
Output mode. This will punch through to any Bel
Canto unit in Variable Output mode. The display will
show the volume level while changing.
VOL-: Decreases the volume setting in Variable
Output mode. This will punch through to any Bel
Canto unit in Variable Output mode. The display will
show the volume level while changing.
CH/SCA +: This will toggle the input selection up in
number and wrap around to the lowest number.
Note that the first press of this control will show the
active input selection.
CH/SCA -: This will toggle the input selection down
in number and wrap around to the highest number.
Note that the first press of this control will show the
active input selection.
umber Buttons: Use for direct input selection.
1: SPDIF1 2: SPDIF2 3: TOSLINK1 4: TOSLINK2
5: USB 6: Line In 7: Phono
ever Connect Either the Positive or egative Speaker Output to Any Ground Contact!
Use Class 2 Wiring for all Loudspeaker Connections!
Beginning in the upper left:
• ON/OFF switch applies power when the
switch is in the 1 position.
• Fuse Drawer with 5 amp/250V slow blow
5mm x 20mm fuse.
• IEC power cord jack: Connect the supplied
or a quality aftermarket power cord from this
jack. Note the power setting indicated on
the back of the unit before connecting the
power.
• G D: Ground wire attachment for turntable
• Line Out: is a volume controlled line output
that can be used to drive a second amplifier
or powered subwoofer.
• Line In: is for signals up to 2.5Vrms.
• Phono: Preamp input raises turntable
signal to line level
• USB: Digital input can be connected to a
computer for playback of any audio format
up to a 2 /96 data rate. The system will
automatically recognize the C5i as an audio
converter enumerated as Bel Canto USB
2496 when using Windows 98 or later and
any version of Macintosh OSX.
• IR In: Connect an IR extension emitter to
increase range of the remote
• TOSLI K 2 and TOSLI K 1: Digital inputs
accept any standard plastic or glass fiber
optical TOSLINK cable and operate to
2 /192 data rate
• SPDIF2 and SPDIF1: Digital inputs accept
RCA connections from any 75 ohm SPDIF
source and operate up to and including a
2 /192 data rate
• R +/- and L +/-: Loudspeaker binding post
connectors
When all connections to and from the unit have been made then double check everything before plugging the C5i
into the power source. After turning on, the C5i will go through its display check and show the software revision
number. The unit will be in Soft Mute with the SP1 input selected. The volume will be set to 65.0.
Using Headphones
When headphones are inserted into the headphone jack, the volume can be adjusted via the control knob or
remote. The input can be selected as normal from the front panel or remote. The Loudspeaker and Line Outputs
of the C5i are disabled when headphones are connected.
Power Up
We recommend leaving the C5i powered at all times as the sonic quality is best after several hundred hours of
play and 8-72 hours of power on after the initial break-in time.
Connection to a Computer
The USB port can be used for up to 2 /96 data, enough for any CD source. For connection at 2 /192 or higher
data rates, we recommend using a quality sound card with SPDIF or glass TOSLINK connection. For more details
on optimizing computer audio sources please refer to our on-line guide at: www.belcantodesign.com
What to do if there is hum or ground noise
The design of the C5i greatly reduces the chance for ground loop induced hum and noise. Connect all power
cables of the audio system to a common outlet box or power conditioner unit. Having the audio system
components share a common ground will greatly reduce the possibility for ground current noise being introduced
into the audio signal path.
Volume Control Punch Through
The Volume Up, Down and Mute functions on the remote control will affect any Bel Canto unit in Variable Output
mode regardless of whether PRE, DAC, CD or TUNER is selected. It is recommended that only the device with
volume control closest to the power amps be in Variable Output mode. Any other devices that are capable of
volume control should be in Fixed Volume mode.
Power Output 1% THD: 120W @ ohms, 60W @ 8 ohms per channel
Minimum Load: 3 ohms per channel
Peak Output Current: 30 amperes
Frequency Response: +/-3 dB 1.5Hz-90kHz, ohm load
THD+N: 0.003% 1W, 1kHz, ohms
IMD (CCIF): 0.0003%, 1W, 1 :15kHz, ohms
Output noise: <50uVRMS A-weighted 10Hz-20kHz
Damping factor: >200
Output Impedance at 100Hz: <20 milliohms
Dynamic Range: 115 dB
Input connections: 5-Digital Inputs, MM Phono and Line Level Analog
Line In impedance: 11 k ohms
Phono In Impedance: 7 k ohms/150pF
Phono Accuracy: +/- 0.25dB, 50Hz-15KHz
Output connections: 2 sets of Binding Posts, RCA Line Out, Headphone Output
Line Out Impedance: 100 ohms
Power On usage: 1 W
Power Off usage: 0.0W
Power Input: 100-120VAC, 230-2 0VAC 50/60 Hz
Size: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD)
Weight: 13lbs, 6.5Kg
Features and specifications are subject to i prove ents and changes without prior notice.
version 1.0

Other manuals for e.One C5i

1

Other Bel Canto Amplifier manuals

Bel Canto M300 User manual

Bel Canto

Bel Canto M300 User manual

Bel Canto Balanced Control Preamplifier Pre1 User manual

Bel Canto

Bel Canto Balanced Control Preamplifier Pre1 User manual

Bel Canto e.One REF500s User manual

Bel Canto

Bel Canto e.One REF500s User manual

Bel Canto REF500m User manual

Bel Canto

Bel Canto REF500m User manual

Bel Canto tosca User manual

Bel Canto

Bel Canto tosca User manual

Bel Canto PReProTM User manual

Bel Canto

Bel Canto PReProTM User manual

Bel Canto eVo2iTM User manual

Bel Canto

Bel Canto eVo2iTM User manual

Bel Canto e.One Series User manual

Bel Canto

Bel Canto e.One Series User manual

Bel Canto e.One Series PHONO3VB User manual

Bel Canto

Bel Canto e.One Series PHONO3VB User manual

Bel Canto DAC3 User manual

Bel Canto

Bel Canto DAC3 User manual

Bel Canto eVo200.2 User manual

Bel Canto

Bel Canto eVo200.2 User manual

Bel Canto PRe3TM User manual

Bel Canto

Bel Canto PRe3TM User manual

Bel Canto REF1000 User manual

Bel Canto

Bel Canto REF1000 User manual

Bel Canto PRE3vb User manual

Bel Canto

Bel Canto PRE3vb User manual

Bel Canto S300i e.One Series User manual

Bel Canto

Bel Canto S300i e.One Series User manual

Bel Canto SET 40 User manual

Bel Canto

Bel Canto SET 40 User manual

Bel Canto e.One series C7R User manual

Bel Canto

Bel Canto e.One series C7R User manual

Bel Canto e.One Phono User manual

Bel Canto

Bel Canto e.One Phono User manual

Bel Canto e.One REF500s User manual

Bel Canto

Bel Canto e.One REF500s User manual

Bel Canto SETi 40 User manual

Bel Canto

Bel Canto SETi 40 User manual

Bel Canto e.One REF150S User manual

Bel Canto

Bel Canto e.One REF150S User manual

Bel Canto REF1000m User manual

Bel Canto

Bel Canto REF1000m User manual

Bel Canto orfeo 60 User manual

Bel Canto

Bel Canto orfeo 60 User manual

Bel Canto e.One C5i User manual

Bel Canto

Bel Canto e.One C5i User manual

Popular Amplifier manuals by other brands

Oldfield Amplifiers Marquis 36 owner's guide

Oldfield Amplifiers

Oldfield Amplifiers Marquis 36 owner's guide

Sunfire Cinema Grand 200-seven user manual

Sunfire

Sunfire Cinema Grand 200-seven user manual

BZB Gear BG-HDA-E14 user manual

BZB Gear

BZB Gear BG-HDA-E14 user manual

Audio Control SAVOY G4 installation manual

Audio Control

Audio Control SAVOY G4 installation manual

Audio Control ACX-650.5 quick start guide

Audio Control

Audio Control ACX-650.5 quick start guide

BASSFACE DB2.2 instruction manual

BASSFACE

BASSFACE DB2.2 instruction manual

Data Video VP-597 user guide

Data Video

Data Video VP-597 user guide

IMG STAGE LINE STA-700 instruction manual

IMG STAGE LINE

IMG STAGE LINE STA-700 instruction manual

Atlas IED DPA404 owner's manual

Atlas IED

Atlas IED DPA404 owner's manual

One Forall 706082 instruction manual

One Forall

One Forall 706082 instruction manual

Audio Control RS 1000 installation manual

Audio Control

Audio Control RS 1000 installation manual

PowerAcoustik PS2-120 owner's manual

PowerAcoustik

PowerAcoustik PS2-120 owner's manual

Smart Technologies SCA-400 manual

Smart Technologies

Smart Technologies SCA-400 manual

Fezz Audio Titania PA Evolution user manual

Fezz Audio

Fezz Audio Titania PA Evolution user manual

tech21 SansAmp GED-2112 Service notes

tech21

tech21 SansAmp GED-2112 Service notes

AR 25U1000 Operating and service manual

AR

AR 25U1000 Operating and service manual

Audio Press Box APB-116P owner's guide

Audio Press Box

Audio Press Box APB-116P owner's guide

WorkPro PA 120 USB/R user manual

WorkPro

WorkPro PA 120 USB/R user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.