Belkin POWERLINE AV User manual

Max. 300m
Installing and Setting Up the Adapter
1. Plug the Adapters into power outlets;
one in the room with your other network
equipment, and the other in a room
where you would like to have network
access. When the Adapters recognize
one another, their “Powerline Link” lights
will glow.
Note: Use the included extension cord for
extra distance, but do not plug the Adapter
into a power strip; doing so may degrade
network performance.
2. Connect one of the Adapters to your
existing modem or router with a network
cable. Use a second network cable to
connect the other Adapter to a computer
or other network device such as a printer
or wireless access point.
Belkin Powerline AV Network Adapters allow you to extend your network over your home’s existing wiring.
Quick Installation Guide
Knowing Your
Belkin Powerline
AV Networking Adapter
Power LED (Right)
Solid Blue – Connected to powerline
Off – Power off
Blinking Blue – During
encryption setup
Solid Blue – Encryption
setup successful
Double Flash – Fail in encryption
Powerline Link LED (Middle)
Blinking – Powerline data
transmitting or receiving
Color Blue – Link rate excellent:
greater then 20Mbps
Color Green – Link rate normal:
10–20Mbps
Color Amber – Link rate low:
0–10Mbps
Off – No activity
Ethernet Link LED (Left)
Solid Blue – 10/100Mbps port linked
Off – No Ethernet link

Belkin provides free technical support via phone and the Web.
However, we encourage you to attempt (or retry) Steps 1 and
2 before contacting Support. The Setup Assistant has built-in
intelligence to help diagnose and fix common problems.
If you’re still having trouble, contact Belkin Support.
North America http://www.belkin.com
Click on Support Center > Networking Support
UK http://www.belkin.com/uk/
Click on Support Centre > Networking Support
Australia http://www.belkin.com/au/
Click on Support Centre
New Zealand http://www.belkin.com/au/
Click on Support Centre
Support
PM01147
F5D4074
© 2008 Belkin International, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed.
3. (optional) For greater security, use the
Security button atop each Adapter:
a) While both Adapters are plugged in,
press the Security button atop one unit
for a second or so. The Security light
will blink.
b) Walk to the other Adapter and press its
Security button for a second or so. The
Adapters will be securely paired.
c) To add more powerline adapters
to your secure network, repeat the
above procedure beginning with one
of the Adapters that is already on your
secure network.
Installation is complete. If step 3 was not
done, you may add more powerline adapters
to the network by plugging them in.