Belkin NetCam User manual

User Manual
F7D7601V2 • 8820ed01175uk Rev. B00
Wi-Fi® Camera with Night Vision
NETCAM

Table Of COnTenTs
Getting Started ........................................... 1
What’s in the Box ............................................. 1
Initial Setup.................................................. 1
Set Up Your Camera Wirelessly Through Your Mobile Devices ...... 2
GETTING TO KNOW YOUR Wi-Fi CAMERA .................. 19
Front Panel ................................................. 19
Back Panel ................................................. 20
Technical Details ........................................ 21
Software Features and Specifications .......................... 21
Main Window ...............................................22
Camera Viewer.............................................. 23
Protection .................................................. 24
Web Browser ............................................... 24
Troubleshooting, Support, and Warranty ................... 28
Belkin International, Inc., Limited 2-Year Product Warranty.........30
How to get service. .......................................... 31
How state law relates to the warranty............................ 32
Technical Support ...........................................33
Regulatory Information ................................... 34
European Compliance Statement:..............................34
General Safety Information: ...................................34

1
Congratulations on buying a Belkin NetCam. This device will
enable you to easily check in on your home and your loved ones
when you are away.
What’s in the Box
NetCam
Power Supply
Quick Installation Guide
Mounting Kit
Initial Setup
To get started, you will need:
Your wireless router, its network name (SSID), and password.
An Android™ device (Version 2.2 or later) or an iPhone,
iPad, or iPod touch (iOS Version 4.1 or later).
GETTING STARTED

2
GETTING STARTED
Set Up Your Camera Wirelessly
Through Your Mobile Devices
1. Plug the NetCam into a power outlet
2. Switch the NetCam to Setup Mode by flipping up the switch on the back
of the camera
Please make sure the switch is in setup mode and the Wi-Fi light is blinking.

3
GETTING STARTED
4. Set Up on iPhone, iPad, or iPod touch
4.1 Connect your mobile device to NetCam Wi-Fi signal
Go to “Settings > Wi-Fi” on your iPhone/iPad/iPod touch and connect
to the camera’s Wi-Fi signal.
3. Download the NetCam App from the App Store or Google Play

4
GETTING STARTED
4.3 Camera Setup
Click “Continue” to begin setup.
4.2 Launch the NetCam App
Once your device establishes a connection with the camera,
launch the NetCam App. You should see a pop-up message
like the one below. Click “Yes” to set up your camera.

5
GETTING STARTED
4.5 Connect to Internet
Choose your Wi-Fi network to connect to the Internet.
You may also choose to connect to your network via Ethernet cable
(not included) by clicking “Ethernet.”
4.4 Camera Preview
The camera will show you a preview after successfully connecting to
your device.
Click “Connect Camera to Internet.”

6
GETTING STARTED
Please wait for the camera to establish connection with the Internet.
4.6 Connect to Internet
Enter your Wi-Fi password if you have a security-enabled network.

7
GETTING STARTED
4.8 Use Existing Account
If you have an existing account, select “Use Existing” and then enter
your account information. Click “Sign in.”
4.7 Create an Account
If this is your first time setting up your camera, you will need to create
an account.

8
GETTING STARTED
Click “Continue.” It will take a few seconds to register the camera with
the server.
4.9 Set Up Camera Info
Create the camera name and its description.