BELLA VITA BVAIRPFLEGA User manual

AIR COMPRESSION PNEUMATIC FULL
LEG MASSAGER
BVAIRPFLEGA

•Do not use voltage beyond the requirement of this product
•Do not attempt to repair or dismantle the product as there are no user-serviceable
parts.
•Do not use the product in a place where it may become wet or damp. If the unit
becomes wet, discontinue use immediately.
•Stop using the product immediately if you feel uncomfortable or any abnormalities
occur.
•Do not use this product in a high-temperature environment.
•Do not use this product if you are currently pregnant or menstruating.
•Do not place the unit near flammable items, explosive items, or chemicals.
•Do not touch the unit with any sharp objects.
•Do not use this product if any of the below apply to you:
-Your skin is infected, swollen, burnt or otherwise damaged.
-You have a pacemaker or other medical implant
-You are suffering from heart disease.
-Your bones are fragile or injured.
-You are suffering from cancer.
-You are receiving medical treatment, or your blood pressure is not normal.
-You are suffering from osteoporosis.
SAFETY & WARNINGS

1. Leg massager
2. Air pressure hose
3. LCD screen
4. Control panel
OVERVIEW

Controls
1. POWER - Press and hold for 3s to power on the device. Press a second time to
adjust the intensity between Low, Middle and High. Press and hold for 3s again to
power off the product
2. MODE – Press to select from the three available modes.
•Mode 1: Pressing (Calf + Thighs + Foot Airbag)
•Model 2: Kneading (Calf + Thighs)
•Mode 3: Shiatsu (Foot)
3. HEAT – Turns the heat function on or off. The heating function is positioned in the
Knee and Calf areas of the massager.

1. Slip on each massager, keeping your feet flat on the bottom. Note that each side is
marked L and R for each foot accordingly.
2. Use the Velcro straps to tightly secure your feet and legs into the massager.
3. Move your foot around to ensure that the massager is securely fastened.
4. Insert both air pressure connections into the controller.
5. Press the power button to power the device on.
OPERATION

6. Adjust the air pressure strength and mode using the Power and Mode buttons on
the controller. You can view the current mode and intensity on the LCD screen.
For best results, do not use the leg massager for more than an hour at a time.
Modes:
Mode 1 - Pressing
Mode 2 - Kneading
Mode 3 - Shiatsu
Calf + Thighs + Foot Airbag
Calf + Thighs
Foot
Heat- The Knee and Calf areas of the massager are equipped with a heating function, and
the heat levels can be selected accordingly.
Note:
The device will automatically shut off after 20 minutes.

•Store the product in a dry place, away from moisture and direct sunlight
•Wipe clean with a dry towel.
Problem
Cause
Solution
The device does not
operate.
The unit is not connected
to a power source.
Make sure the unit is fully
connected to the power.
The power button was not
pressed.
Press the power button.
The device suddenly
stops working.
The unit was running for
more than 20 minutes.
Restart the unit to resume use.
CLEANING & CARE
TROUBLESHOOTING

Rated voltage
12V 2A
Power consumption
24W
Default operation time
20 minutes
•Leg massager
•Power adapter
•User guide
SPECIFICATIONS
IN THE BOX

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com