BELLACOR K6757 User manual

Assembly Instructions

2
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck --though we’re confident you won’t need it.
Congratulations on your latest purchase.
1. Check for damaged or missing parts. Customers can email or call us to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
Before you begin

..............................................
table of contents
introduction
hardware
parts list
assembly
2
4
5
6 - 10
QUESTIONS? Just email or call our parts and service. For fast service, have the style number and article number ready when calling. 3

4
(B) x 2
5/16" x 55mm
round hex screw
(C) x 4
5/16" x 50mm
round hex screw
(D) x 10
Φ 8mm lock washer
(E) x 10
Φ 22mm flat washer
(F) x 1
5mm Ball end
Hex wrench
(A) x 4
5/16" x 80mm
round hex screw
Hardware

ITEM DESCRIPTION QUANTITY
5
1
3
2
1
2
3
chair back
seat cushion
front leg
1
1
2
3

............................................................................
step 1.
1 2
Open the velcro.
Please do not assemble with power tools.
2
3
3
(C) x 4
5/16" x 50mm
round hex screw
(D) x 4
Φ 8mm lock washer
(E) x 4
Φ 22mm flat washer
(F) x 1
5mm Ball end
Hex wrench
F
C
E
D
6

............................................................................
step 2.
7
Please do not assemble with power tools
1 2 Do not until the next step.tighten the bolt
(D) x 2
Φ 8mm lock washer
(E) x 2
Φ 22mm flat washer
(F) x 1
5mm Ball end
Hex wrench
(B) x 2
5/16" x 55mm
round hex screw
B
D
E
F
1
2

until all screws are lined up with the frame. Please do
............................................................................
step 3.
8
Please do not assemble with power tools
Now you may tighten all 6 bolts.
1
(D) x 4
Φ 8mm lock washer
(E) x 4
Φ 22mm flat washer
(F) x 1
5mm Ball end
Hex wrench
(A) x 4
5/16" x 80mm
round hex screw
A
D
E
F

until all screws are lined up with the frame. Please do
............................................................................
step 4.
9
1
Close the velcro.

............................................................................
step 5.
10
Adjustable leveling feet
( This part is already attached on the end cap of 4 legs. )
Level the furniture, use leveling feet if needed.
A friendly reminder from us:
Please keep the Allen wrench.
After a period of time, there may be a chance the
KD furniture may become loose, please use an
Allen wrench to tighten the loose bolts.
Put the chair right and check whether the chair has been well assembled.
If it is not assembled, loosen the screw and tighten it on the ground.