BELLAVIE 055-SA-8010 User manual

Owner’s Manual
Salon Spa Bed
item no. 055-SA-8010
www.bellavieusa.com
1 [phone]
FOLLOW US: CONTACT INFO: NOTE:
The instruction booklet contains IMPORTANT safety
information Please read and keep for future reference.

2
TABLE OF CONTENTS
OUR BRAND
Bellavie is a magnet for both consumers and professional alike. Professional customers include
makeup artist, hairstylists and hair salon owners. Our brand features a full complement of
essential salon equipment from chairs, shampoo bowls and mirrors to an unmatched selection
of contemporary furnishings.
PLEASE LIKE, COMMENT AND SUBSCRIBE.
OUR BRAND
IMPORTANT INFORMATION
PACKAGE CONTENT
ASSEMBLY INSTRUCTION
WARRANTY
02
03
04
05
11

3
READ ALL INSTRUCTION BEFORE INSTALLATION
• Iron / steel components are coated with rust inhibiting paint to protect it from rusting.
However, due to the nature of iron, surface oxidation (rusting) will occure once these
protective coating are scratched. This is a natural process and is not a defect. To
minimize this condition, we recommend to assemble and handle the product with care.
• Keep children or pets away from assembly area. Children and pets should be supervised
when they are in the area.
• Some parts may contain sharp edges. Wear protective glove if necessary.
• When assembling or using this product, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to the equipment.
• Make sure all screws and bolts are securely tighten before using the product.
• Follow the assembly steps exactly as shown. Do not skip any steps.
• Use the product within the weight limit. The weight capacity is 300 lb / 136 kg.
SAVE THESE INSTRUCTIONS
INPORTANT INFORMATION

4
PACKAGE CONTENT
2x 2x
R
L
4x
1 2
3
4
5
67

5
PACKAGE CONTENT
ASSEMBLY INSTRUCTION
2x
x12 x8 x4 x4 x4
1
M8x20 M8x35 M8x50 M8x55
M8x55
3
ABC D E
D
Leave bolts 50% tighten.
E

6
ASSEMBLY INSTRUCTION
2
3
21
6
BB
A
Follow the arrow direction on the
product for proper installation.
M8x35
M8x20

7
4
ASSEMBLY INSTRUCTION
5A
33

8
ASSEMBLY INSTRUCTION
5
Tighten the bolts to 50% when assembling, then fully tighten all the bolts after the crossbars are assembled in
place. Make sure all bolts are tightly fastened before the unit is used.
4
4
C
M8x50

9
6
ASSEMBLY INSTRUCTION
7
7
Make sure to place the product on a even and level surface.
Adjust the leg leveler under the support if necessary.
Short
Long
R
L

10

11
LIMITED TERM WARRANTY
ONE (1) YEAR FROM DATE OF PURCHASE
WARRANTY TERMS ADDITIONAL CONDITIONS
ADDITIONAL CONDITIONS
Bellavie warrants that its merchandise are free
from manufacturing defects (workmanship and/
or material) and will either give credit or replace
defective parts for a period of up to one (1) year
from the date of purchase in accordance with the
conditions set forth below. If a manufacturing defect
is found, Bellavie should be notied promptly of
the defect and supplied a copy of the invoice and
delivery ticket. Inspection by a Bellavie employee
or representative may be necessary to verify that
a manufacturing defect exists, or you may be
required to submit samples to Bellavie along with
a digital image of the defects. If replacement is
required in accordance with this warranty and
the defective material or merchandise has been
discontinued or unavailable, Bellavie reserves the
right to select and supply similar merchandise or
o󰀨er full credit for the merchandise; otherwise the
same material or merchandise will be supplied
for replacement purposes. This warranty is made
solely to the retailer and is not transferable under
any circumstances. It is the retailer’s responsibility
to contact Bellavie with a claim. We will not handle
claims from consumers directly; all requests must
go through the retailer who sold the merchandise
to the consumer. We advise all retailers to retain
invoices for a minimum of one (1) year for warranty
purposes. This warranty supersedes and replaces
all implied warranties of merchantability and
use for particular purpose. No representative,
employee, or agent of Bellavie or any other person
is authorized to assume for Bellavie any additional
liability or responsibility in connection with Bellavies
merchandise except as described above. Implied
warranties or merchantability and tness of the
merchandise are limited to a period of one (1) year
from the date of purchase. In no event shall Bellavie
be liable for indirect, consequential or incidental
damages of any kind.
The following examples are not
manufacturer’s defects:
• Colors may vary slightly from the photo because
of photography and printing tolerances.
• Sizes are stated in U.S. standard measurements
while the actual sizes are manufactured using
the metric system. Therefore the sizes may
vary slightly.
• There are no exchanges or refunds on any
pillows or toppers sold.
• No returns for buyer’s remorse.
* No returns - other than stated above -
will be accepted
Warranty is void for any of the following conditions:
1 Improper maintenance or improper use resulting
in damage.
2 Any product modications by dealer, consumer,
or other parties not authorized by Bellavie will
void this warranty.
3 Floor samples sold or products designated “AS
IS” at the time of purchase are not covered by
the warranty.
4 Warranty does not cover minor variations or
di󰀨erences between oor samples or printed
illustrations and your furniture.
5 Cost of packaging and shipping to and from
Bellavie is not covered by the warranty unless
expressly arranged by Bellavie.
6 This warranty covers only articles of appliances
intended for residential use only, does not cover
any industrial, commercial, institutional, or
rental use.
7 Dissatisfaction due to buyer’s remorse.
8 Normal wear and tear.
9 Damages incurred during transportation.
10 Damages incurred during assembling
or maintenance.
11 Damages incurred by accidents or abuse.
Additional conditions for warranty on upholstery
are listed on the attached addendum.

FOLLOW US: CONTACT INFO:
www.bellavieusa.com
1 [phone]