Beneston VHDI-0050M User manual

VHDI-0050M V00150213-U(1)
BENESTON ®
USER MANUAL
VHDI-0050M
HDMI Single Cat5e/6 Bi-Direction IR
Features
● Extending distance is 170 ft(50 meters) at resolutions 1080P
3Dor 1920x1200 60fps, and 270 ft(80 meters) at1080i/720P
through single cat5e cable.
● Support audio formats, Dolby True HD, DTS-master, etc.
● Support 3D signals(all 7 formats), include new ones, such as
Frame Packing, Side-by-Side,Top- to-Bottom, etc.
● Support EDID.and CEC
● VESA DDC and hot swap technology (HPD).
● 38Khz remote IR (RX->TX).
● Compatible with HDCP 1.2.
● Compatible DVI 1.0.
● Support cascade to enhance extending distance.
● Industrial metal case, easy toinstall.

VHDI-0050M V00150213-U(1)
User manual
Preface ....................................................................................................... 1
1. Cautions ................................................................................................. 2
2. About ...................................................................................................... 3
3. Installation............................................................................................. 4
4. Operation instruction..........................................................................5
5. Maintenance ...........................................................................................6
6. Trouble shooting .....................................................................................7

VHDI-0050M V00150213-U(1)
Preface
Thanks for purchasing our HDMI Single Cat5e/6 Dual Direction IR Extender. Before using this
product, please read this user manual carefully. Follow the instruction to keep your safety and
avoid products damage.
This user manual might be modified irregularly because of updated products. And the manual
is for instruction only; we do not guarantee the information and the suggestions.
1. Cautions
Logo and meaning
Careful, warning, dangerous, Pay attend to following items.
Cautions
* Do not use this product in the extreme hot, cold, dusty or humid environments.
* Prevent friction with hard objects.
* Avoid the product falling down from a high place, or it may damage the hardware.
* The product is not water proofed. So do not get any liquid into the unit please.
* Do not dismantle, assemble or alter the product arbitrarily.
Warning
The CAT5e/6 cable can NOT be placed underground, outdoor, and between buildings.
It must be placed with extenders indoor.

VHDI-0050M V00150213-U(1)
2. About
Product model and standard
HDMISingle
Cat5e/6 Bi-Direction IR Extender includes transmitter and receiver. Transmitters
combine HDMI video,audioand controlsignals,then transmit them throughsingleCAT5ecable.
Receivers get thesesignals, separate signalsand rebuildvideo,audioand controlones,output
throughHDMI interfaces. It also supports bi-direction remoteIR (RX->TX and TX->RX), EDID
call back, and both inputand outputHDCP1.2 compatible. This productcan achieve all functions
throughsingleCAT5ecable. Extending distance is 50 metersfor 1080p60HzHD signal.
Main features:
* Extending distance is 170ft.(50meters) at resolutions 1080P 3D or 1920x1200 60fs, and
270ft.(80meters) at 1080i/720P through single CAT5e cable.
* Support audio formats, Dolby True HD, DTS-master, etc.
* Support 3D signals (all 7 formats),such as Frame Packing,Side-by-Side,Top-to-Bottom, etc.
* Supports EDID call back.
* Supports CEC pass through.
* VESA DDC and hot swap technology (HPD).
* Bi-direction remote IR (RX->TX and TX->RX).
* HDCP 1.2 compatible.
* Compatible DVI 1.0.
* Support cascade to enhance extending distance.
* Industrial metal case, easy to install.
Parameters:
Interface
T ransm itters
HDMI in put, IR output (3.5mm ), IR inp ut
(3. 5mm ), RJ 45 Ethern e t interface, 5V
Rece ivers
HDMI o u tput, IR out p ut (3 .5m m), IR input
(3.5mm), RJ45 Ethern e t interface, 5V
Power
<3.5W TX or <2.5W RX
Dime ns ion
(L x W x H): 100 x 65 x 26mm
Net weight
0.2kg
Video
Maxi mum T MDS clock freq ue ncy 165MHz ， 4.95Gbps
Resol ution
1080P 170ft (50 meters) -CAT5 e / 2 70ft (80 mete rs )-CAT 6
Audio formats
8-channel, support Dolby True HD and DTS Master
TMDS i nput
1.2 volts (point to point)
DDC input signal
5 volts (point to poin t)
Indicat or
Power-Red, vi deo li nk-Bl ue
HDMI in terface
HDMI 1.3 st andard (HDMI 1 .4 3D function), HD CP 1. 2 , supp o rt
CEC, ED ID
Remote IR
38KHz
ESD lev el
HBM ±8 kV （Contact D isc harg e ）
Temper ature
0 ~ 40°C (operation), -2 0~6 0 °C(s tock)
Compliance
FCC; CE;

VHDI-0050M V00150213-U(1)
Product introduction
Transmitter：
①DC 5V input
②CAT5e/6 cable RJ45 port
③IR receiver input
④Power and Video status indicator
⑤HDMI Input port, connect to Video source
⑥IR blaster output
Receiver：
①DC 5V input
②CAT5e/6 cable RJ45 port
③IR receiver input
④Power and Video status indicator
⑤HDMI Input port, connect to Video source
⑥IR blaster output
Packing list
* 1* transmitter, 1*receiver
* 1* remote IR blaster(with 1meter cable)
* 1* remote IR receiver (with 1meter cable)
* 1* DC5V 1.0A adapter.
* 223*180*50mm/carton

VHDI-0050M V00150213-U(1)
3. Installation
Installation details and cautions
* Before installation
a) Prepare place for installing system. The video sources should be close to the transmitter,
and the display terminals should be close to receiver. It is better to keep the HDMI
cables less than 6 meters.
b) Basing on real request, make CAT5e/6 cables for connecting the transmitter and the
receiver. The length can NOT be more than distance of parameters.
c) CAT5e/6 cables should be far away from electromagnetic disturbance sources. Such as AC
motors, electro soldering, fluorescents, microwave ovens, etc. These disturbance sources
might affect extending distance or video quality.
d) Ensure the length of cable is suitable, no external tensions.
e) Ensure reliable DC adapter or other DC source.
* Transmitter side connection
a) Connect your Player and HDMI IN port of transmitter with HDMI cable (HDMI cables are
not included in this product).
b) Insert IR blaster cable to extender TX IR OUT port. IR blaster should be close to your
player or other controlled equipment. TX IR IN port can be connected an IR receiving cable.
c) Insert CAT5e/6 cable to CAT5e/6 port.
d) Connect power adapter or provide DC input from rear DC input port.
* Receiver side connection
a) Connect your HDTV and HDMI OUT port of receiver with HDMI cable (HDMI cables are
not included in this product).
b) Insert IR receiving cable to extender RX IR IN port. IR receiver should be face outside for
easy operation. RX IR OUT port can be connected another IR blaster cable.
c) Insert CAT5e/6 cable to CAT5e/6 port.
d) Connect power adapter or provide DC input from rear DC input port.
* Typical installation instruction
Connect a player and a HDTV:

VHDI-0050M V00150213-U(1)
4. Operation instruction
Getting started
After finishing all steps above, system is workable, follow below steps.
a) Ensure the video source and the display terminals are power on.
b) Ensure all input, output cables are connected.
c) Insert TX or RX power adapters into power plug bases.
d) Green power indicator will light.
e) It takes about 2~3 seconds to finish EDID and other initialization automatically.
f) Transmitter video indicator will light; it means input video signal is OK. Then receiver video
indicator will light, it means output video signal is OK.
g) At this time, display terminal will show the same format video that video source send out.
Remote IR function
Using video source's (such as Blue-ray DVD) IR controller faces extender RX side IR receiver.
IR signal will be transmitted to extender TX side IR output port, to control video source directly.
Contrarily using video sink's (such as TV, projector) IR controller faces extender TX side IR
receiver. IR signal will be transmitter to extender RX side IR output port, to control video sink
straightly.
EDID call back function
Products support EDID call back function. Receiver unit will read EDID from display terminal,
and then pass this EDID information to transmitter unit. The transmitter unit will update internal
NVRAM to save new EDID information, and inform video source to read updated EDID
information.
This function is automatic, no need to setup by customers. This function is to keep maximum
compatibility.
CEC pass through function
Products support CEC pass through function. When the system is powered on, CEC pass
through is built automatically.
Cat5e/6 cable information
Products request normal CAT5e or CAT6 Ethernet cables, which must meet
standard-TIA/EIA-568B, refer to below pin definition.

VHDI-0050M V00150213-U(1)
5. Maintenance
Storage conditions
Products storage temperature should be -20°C~60°C. For long time storage requirement,
please use original carbon boxes, and avoid from high humid, acid base or dusty place.
Maintenance
Warning
To ensure your safety, place choose original adapters. And provide stable AC input according
to this manual.
6. Trouble shooting
Normal problems
a) No output on display terminals
Check transmitter and receiver power first. And then check if transmitter unit video
indicator is light. If it is not, check video source please. If it is, check receiver unit video
indicator. If receiver video indicator is not light, check CAT5e/6 cable please.
If length of cable is longer than maximum distance, the system is not workable.
Refer to manual parameters segment to get more details of distance. If receiver video
indicator is light, check HDMI cable and display terminal please.
b) Remote IR is not workable
Check transmitter and receiver power fist. Ensure both TX and RX power and video
indicators are light. And then check CAT5e/6 cable please. Check if IR blaster unit
connects to extender IR out port, and close to controlled device. And check if remote
controller faces to IR receiver.