NOTE: Package content may differ if you have placed a special order or
placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without further
notice to a product described herein to improve reliability, design,
packaging or function.
User’s Guide
Check the package and make sure you have everything:
Contents
(1) FTHS Transmitter & Receiver
(2) +5V DC Power supply x 2pcs
(3) User’s Guide
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
Check your package Installation
Installation Steps:
1. Connect the Transmitter module to the source device using
HDMI short copper cable. (HDMI cable is not Included)
2. Connect the Receiver module to the display device using
HDMI short copper cable. (HDMI cable is not Included)
3. Connect a single strand of OM3 multi-mode SC terminated fiber
optic cable(50/125㎛) from the Transmitter to the Receiver module.
4. Connect the included +5V DC power supply into Transmitter and
Receiver module.
5. Active LED indicator on the modules will be light up after
all connections are completed.
*Recommend to use the HDMI2.0 standard cable for proper working
