Beneston VHDI-WIR100M User manual

VHDI-WIR100M V00150213-U(1)
BENESTON ®
USER MANUAL
VHDI-WIR100M
100M WHDI HDMI Wireless Externder
Our 100M WHDI wireless transmission enable wireless
transmission of video/audio from any HDMI video source
such as PC/HDTV to display devices includes HDTV,HD
monitor Over the 5Ghz band with very low latency.
WHDI wireless transmission does not require any special
configuration or software driver installation .Simply
connect the transmitter to the HDMI output of the video
source and the receiver to the HDMI input of the Panel/
TV/ Monitor . Our device is really plug and play design .
Our device is widely applied to family entertainment ,
office presentation, lecture, education ,medical treatment ,
party , conference ect.
Features
* Apply real-time ,uncompressed wireless high definition transmission
technology Called WHDI
* Support HDMI single wireless transmission upto 100meter
* Support P2P and point to Multipoint mode (80meter)
* Support Full HD resolution like 1080p60hz
* Support Blue-ray DVD,Media player, IPTV, Notebook PC, Desk PC,
PS3 game machine ect with HDMI output interface device.
* Support LCD display of available Frequency, Power status and
orange-red backlighting to ensure good views outside door.
* Support 38khz IR control signal output and audio input
* Compliance to EDID 1.1 and HDMI1.3 , HDMI1.4 3D (custom ),
WHDI1.0 standard
* Support AES128/256 image encryption technology
* Apply plug and play design to easily install and use
* Support DC power supply or offer lithium battery powered like
Cannon LP-E6+
Support two flexible fixing ways: Hot-shoe and 1/4inch screw mounting

VHDI-WIR100M V00150213-U(1)
Parts and Function:
Transmitter
Interface
Function
1. DC IN
DC size is 5.5mm to DC power supply
2. HDMI
HDMI1.3A 9Pin, HDMI source
3. Mini USB
Slave mode , TX-USB powered
4. Audio IN
3.5mm phone jackect
5. ON/OFF Button
Pressed 2s to power on Transmistter,
Press Continued 2S to power off transmitter
6. OK button
Switch audio line-in and built-in audio
7. Mode
Select functions
8. LCD Monitor
Show transmitter’s network status,frequency, work
mode , power value ect
9. Power
Light: power supply is ok
Off or wrinkle :Power supply is adnormal or off
10. Allarm
Power source is low
Wrinkle : Powering warn
11. Fixing device screw
hole
Two piece , size is 1/4inch used to connect with
screwing stand
12. Hot shoe
Fixing device hot shoe mounting
13. Battery
Cannon LP-E6+ compatible series battery
14. Antenna
Wireless transmission
15. Battery clamp
Fixing battery

VHDI-WIR100M V00150213-U(1)
Receiver
1.DC IN
DC size 5.5MM to DC power supply
2.HDMI OUT
HDMI display such as HDTV,Projector
3.MINI USB
Salve mode, , RX-USB for keyboard or mouse
4.On/off Button
Press 2s to powered on receiver
Press continued 2s to powered off receiver
5.MODE Button
Select functions
6.OK Button
Ensure the function
7. LCD monitor
Show receiver working status such as networking,
frequency, Rf strength, Power value
8.Power
Light: power supply is ok
Off or wrinkle :Power supply is adnormal or off
9.Allarm
Power source is low
Wrinkle : Powering warn
10.Fixing device
screw hole
size is 1/4inch used to connect with screwing stand
11.Battery
Cannon LP-E6+ compatible series battery
LED monitor function:
Transmissitter Receiver
1.Power value
2.Signal strength
3.Available frequency
4.Network status
5. Video Status
6. Work mode : B broadcast (One TX, Multi-RX)
7. Microphone input indicator

VHDI-WIR100M V00150213-U(1)
Button function direction :
MODE Button : select the functions
OK Button: Ensure select
ON/OFF Button: Powered on or off
Press any button to activate the LCD monitor as monitor was under sleep.
Technical Spefication :
Model
VHDI-WIR100M HDMI wireless Extender
Available Frequency
5.1-5.9 Ghz
Video communication standard
Mimo
Transmission Power
14-15dbm
Receiving Sensitivity
<- 70dBm
Antenna
2x1 ,3dBm Antenna (TX) / Built-in antenna (RX)
Bandwidth
40mHZ
Modulation Mode
OFDM16QAM (Forward channel )
OOK (Postback channel )
Data rate
Forward channel :3Gbps
Network Mode
P2P, P2 multipoint
Video Format
480p,576p,720p, 1080i ,1080p
S/NR
>23db@(-60<Rx Pin<45)dBm
Audio Format
PCM, ACC, Dolby digital 2.0/5.1 , DTS5.1 ,LPCM5.1/7.1
Wireless Transmission Distance
100M
System Delay
<1ms
HDMI standard
HDMI1.3, HDCP1.2
LED Indicator
Network or video
Input and output Interface
HDMI in/out socket
USB in/out
Audio in
DC in
LED indicators :Power ,Alarm
LCD Monitor :MODE ,OK ,Power on/off button
Power Supply
DC12V,1A
Or Battery : Cannon LP-E6+ (TX ) Sony NP-F570 (Rx)—
2h
Size
TX: 118x5443mm
RX: 118x60x45mm
Work temperature
0℃~80℃
Storage temperature
-20℃~40

VHDI-WIR100M V00150213-U(1)
Application Diagram: