Beneston HMI-4K100M User manual

HMI-4K100M V00150213-U(1)
BENESTON ®
USER MANUAL
HMI-4K100M
4KX2K HDMI 1.4 Cat5/6 Extender
Our HDMI 1.4 extender via cat5/6 isa HDMI extender
while using CAT-5E/6 cable as transmission media.
The transmission distance for 1080P reaches 100 meters.
For 4K*2K reaches 70meters, support 3D transmission,
the IR system could control the sources from the sinks
or control the sinks from sources.
This device offers solutions for digital entertainment
center, HDTV retail and show site, HDTV, STB, DVD and
Projector factory, noise, space and security concerns,
data center control, information distribution, conference
room presentation, school and corporate training
environments.
Features
*
One pair as a full functional module, no need for setting.
* Use single UTP LAN cable (CAT-5E/6) to substitute
HDMI cable to achieve long distance transmission.
* UTP cable termination follows the standard of IEEE-568B.
* Transmission distance reaches up to 100 meters
under the video format of 1080P 70 meters for 4k*2k.
* HDMI V1.4 supported.
* HDCP compliant.
* Full HD support: 1080p@60Hz@48 b/pixels, 3D and
4Kx2K
* With ESD protection inside.
* Mounting ears supplied.
* Transfer Bidirectional Infrared control signal together
with the HDMI signal.
* RS232 Port for firmware update or RS232 control
signal transmission.

HMI-4K100M V00150213-U(1)
Caution
1. Handle this productwith care
Avoid any shock or bumpingof the product. Improperhandlingcould damagethe product.
Do not handle the unit with wet hands. Provide proper ventilationand air circulationand do
not use near water.
2. Requires a proper operating environment
This product is not waterproofand is designed for indoor use. The allowable temperature
range for operationof this product is between0C~40C/ 32°F~104°F.
3. Check the power source voltage
The power source voltage should be within the specified range. (Productmust meet the
specifications).
4. Objects and liquid entry
Never push objects of any kind into this product as this may touch dangerous voltage points
of short out parts that could result in a fire or electric shock. Never spill any kind of liquid on
the product.
5. Cleaning
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device
before cleaning.
6. Servicing
Do not attempt to service this product by yourself as openingor removingcovers may expose
you to dangerousvoltage or other hazard s. Refer all service to qualified servicingpersonnel.
Package Contents
①Main unit NO.1. transmitter
②Main unit NO.2. receiver
③Operating instructions.
④2x 5VDC power supply.
⑤1xIR TX unit. (IR emitter cable)
⑥1xIR RX unit. (IR receiver cable)
Panel Description
Transmitter Receiver

HMI-4K100M V00150213-U(1)
LED Direction :
Transmitter
Receiver
HDMI
HDMI input
HDMI output
IR IN
IR input
IR OUT
IR output
RJ45
UTP input
Rs232
Rs232 port
DC/5V
Power input 5VDC
Indicator
Status
LINK
ON
Tx and Rx link right
OFF
Tx and Rx link fail
PWR
ON
Power ON
OFF
Power OFF
Specification
Item
Description
Model
4k X2k HDMI 1.4 cat5 Extender
Video Format
DTV/HDTV;
Supported
1080P/1080i/720P/576P/480P/576i/480i
Output Video
HDMI 1.4+HDCP
Output Audio
Support DTS-HD, Dolby-HD
Maximum
Transmission
Distance
1080pCAT6 120 Meters
1080p 3DCAT6 100 Meters
4K*2K CAT6 70 Meters
Input Video Signal
0.5-1.0 volts p-p
Power Supply
5V/2A DC
Power Consumption
2.5Watts (Transmitter) / 5 Watts(Receiver)
Dimensions
105(H)×76(W)×27(D)mm
Mass (Main unit)
0.7Kg / 1.54lb (Pairs)
Operating Temperature
-5 - +35°C
Operating Humidity
5 to 90 % RH (no condensation)
Install direction :
1)Connect the HDMI input source (such as HD-DVD、PS3、STBetc. ) to transmitter
2)Connect a CAT-5E/6E cable from RJ45 port of transmitter to RJ45 port of receiver
3)Connect the HDMI sink(such as HD-LCD、HD-DLP) toreceiver
4)Connect the IR TX UNIT into transmitter IR TX; Connect the IR RX UNIT into receiver IR RX.
5)Connect the IR RX UNIT into transmitter IR RX; Connect the IR TX UNIT into receiver IR TX.
Attention: Please insert and extract cables gently.

HMI-4K100M V00150213-U(1)
Typical Application
Warranty
LIMITED ONE (1) YEAR WARRANTY AND EXCLUSIONS
Manufacturer warrants to the original consumer purchaser and not for the benefitof anyoneelse
that this productat the time of its sale by Manufacturer is free of defectsin materials and
workmanship undernormaland properuse for one (1) year from the purchase date.
Manufacturer's only obligation is to correctsuch defectsby repairor replacement, at its option,
if withinsuch one (1) yearperiodthe productis returned prepaid, with proof of purchase date,
anda description of the problem. This warrant excludes and thereis disclaimed liabilityfor labor
for removal of this productor reinstallation. This warranty is voidedif this productis installed
improperly or in an improper environment, overloaded, misused, opened, abused, or alteredin
any manner, or is not usedundernormal operating conditions or not in accordance with any
labelsor instructions. There are no otherimplied warranties of anykind, including merchantability
andfitnessor a particular purpose, but if anyimplied warranty is required by the applicable
jurisdiction, the duration of anysuch implied warrant, including merchantability and fitness
of or a particular purpose, is limitedto one (1) year.
Manufacturer is not liablefor incidental, indirect, special,or consequential damages, including
without limitation, damage to, or loss of use of, any equipment, loss sales or profitsor delayor
failureto perform this warranty obligation. The remedies, provided thereinare the exclusive
remedies underthis warranty, whether basedon contract, tort or otherwise.