BERGHOF B-EasyConnect User manual

USER MANUAL 2.2
B-EasyConnect
Accessories for communication and IOT
─S-02040102-0000
B-EasyConnect

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
2
Copyright © Berghof Automation GmbH
Reproduction and duplication of this document and utilization and communication of its content is
prohibited unless with our expressed permission. All rights reserved.
Infringements will result in compensation for damages.
Legal disclaimer
The content of this document has been verified for conformity with the hardware and software de-
scribed therein. It is, however, impossible to rule out all variations. As a result, we cannot be held
responsible if the content is not fully compliant. The information given in this document is updated
regularly and any corrections will be reflected in future versions. We are always willing to receive
suggestions for improvements. Subject to technical modifications.
Trademarks
Microsoft®, Windows®and the Windows®logo are registered trademarks belonging to the
Microsoft Corp. in the USA and in other countries.
i.MX6 is a registered trademark belonging to NXP Semiconductors.
Raspberry Pi Zero W is a registered trademark belonging to the Raspberry Pi Foundation
The rights of all companies and company names as well as products and product names mentioned
in this documentation belong to the respective companies.
Notes on this user manual
This device user manual contains information which is specific to the product and which is valid at
the time of printing. This manual is only complete in conjunction with the product-related hardware
and software user manuals required for the individual application.
You can reach us at:
Berghof Automation GmbH
Arbachtalstrasse 26
72800 Eningen
Germany
T +49.7121.894-0
F +49.7121.894-100
E-mail: [e-mail]
https://www.berghof-automation.com
Berghof Automation GmbH is certified according to DIN EN ISO 9001:2015.

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
3
Change Log
Version
Date
Description
1.0
20.04.2020
First version
2.0
23.12.2020
First Revision
2.1
08.01.2021
Corrections added
2.2
20.01.2021
Opensource Licenses added

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
4
Table of Contents
1GENERAL INFORMATION...................................................................................................6
1.1 Notes on the manual ...........................................................................................................6
1.2 Symbols and visual depictions ..........................................................................................7
1.3 Hazard categories and indications ....................................................................................8
1.4 Qualified personnel .............................................................................................................9
1.5 Duty of care ..........................................................................................................................9
1.6 Handling of device.............................................................................................................10
1.6.1 Transport and storage .........................................................................................................10
1.6.2 Operation .............................................................................................................................10
1.6.3 Unpacking............................................................................................................................10
1.6.4 Assembly .............................................................................................................................11
2SAFETY INSTRUCTIONS...................................................................................................12
3INTENDED USE ..................................................................................................................13
4PRODUCT DESCRIPTION .................................................................................................14
4.1 Use cases ...........................................................................................................................14
4.2 Overview.............................................................................................................................15
4.3 Scope of delivery...............................................................................................................16
4.4 Interfaces............................................................................................................................17
4.5 Requirements for operation..............................................................................................18
5CONFIGURATION...............................................................................................................19
5.1 Configuration of EasyConnect via Webinterface of the Berghof control system.......19
5.1.1 Configuration menu..............................................................................................................19
5.1.2 Changing/Setting EasyConnect operation mode.................................................................20
5.1.3 Operation as WLAN Access Point.......................................................................................21
5.1.4 Operation as WLAN Client Mode –with activated DHCP ...................................................22
5.1.5 Operation as WLAN Client Mode –with static IP-Address..................................................23
5.2 Diagnostic information......................................................................................................24
6OPERATION........................................................................................................................25
6.1 Switching on and off..........................................................................................................25
7SERVICE AND MAINTENANCE.........................................................................................26
7.1 Maintenance.......................................................................................................................26
7.2 Cleaning the device ...........................................................................................................26
8DISASSEMBLY...................................................................................................................27

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
5
9DISPOSAL ..........................................................................................................................27
10 TECHNICAL DATA.............................................................................................................28
10.1 Operation conditions ........................................................................................................29
10.2 Supported Wi-Fi-Standards..............................................................................................30
11 PRODUCT CONFORMITY..................................................................................................31
11.1 Declaration of conformity.................................................................................................31
12 CUSTOMER SERVICES / ADDRESSES...........................................................................33
12.1 Customer service ..............................................................................................................33
13 APPENDIX ..........................................................................................................................34
13.1 Notes on copyright and license of the software ............................................................34

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
6
1 General information
This user manual is intended for use by qualified professionals and contains information on the
assembly, installation, start-up and maintenance of the device.
1.1 Notes on the manual
This manual is a component of the product and applies to the following devices:
B-EasyConnect
The manual contains information on the following topics:
Applications
Safety
Mechanical design
Electrical design
Connections
Start-up
Upkeep and maintenance
Decommissioning
Disposal
Always keep this user handbook available alongside the product.

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
7
1.2 Symbols and visual depictions
The following symbols and visual depictions are used in this handbook:
Symbol
Meaning
…
List entry
…
Individual instruction or list of instructions which can be carried out in
any order.
1. …
2. …
List of instructions which must be carried out in the order given.
Additional product information
Quotation marks indicate user interface elements and functions, as well as paths.
Example: Select "System/Push Service" and click "Sender"
Brackets mark placeholders
Example: To edit the device <name>, click the "Edit" button
Bold font in the text emphasizes important words
Example: Do not leave the page without saving.
Design of warnings:
WARNING
Optional:
Other
Symbols
Hazard type and source
Short description and consequences
Preventive measures

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
8
1.3 Hazard categories and indications
The following indications are used in the case of warning messages to ensure your personal safety
and avoid any damage to property.
The indications have the following meanings:
DANGER
Serious injury or death
Non-compliance with the safety features will result in death or serious injury.
Take preventive measures.
WARNING
Possible serious injury or death
Non-compliance with the safety features may result in death or serious injury.
Take preventive measures.
CAUTION
Possible minor injuries
Non-compliance with the safety features may result in minor injuries.
Take preventive measures.
NOTE
Possible damage to property
Non-compliance with the safety features may result in damage to property.
Take preventive measures.

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
9
1.4 Qualified personnel
This manual is intended for qualified personnel and contains information on the assembly, installa-
tion, commissioning and maintenance of the equipment.
Qualified personnel by definition of this documentation and the safety instructions it contains are
trained specialists who are familiar with the safety concepts of automation technology and who are
authorized to assemble, install, commission, ground and mark devices, systems and circuits in ac-
cordance with the standards of safety technology.
1.5 Duty of care
The operator provides this user manual or excerpts from it to the persons who perform tasks with
or in connection with the equipment. The operator keeps this user manual or relevant parts of it
within easy reach in the immediate vicinity of the equipment. When handing over the equipment to
another person, the operator passes this user manual on to this person.
The user (OEM) must ensure the following:
The device must only be used according to regulations.
The device must only be used in good working order.
The user handbook must always be kept legible and fully available.
Only sufficiently qualified and authorized personnel may carry out the assembly, installation,
start-up and maintenance of the device.
These authorized personnel must receive regular training on all relevant occupational health
and safety and environmental protection issues and must be fully familiar with the contents of
this user handbook, particularly the sections regarding safety features.
Any markings or identification labels as well as safety and warning signs on the device must
not be removed and must be kept legible at all times.
The national and international regulations regarding the operating of machinery and facilities
where the device is being used must be observed at all times.
The user always has any current relevant information regarding the device and its use or
operation at his disposal.
The user takes direct responsibility for agreeing with the competent authorities, the use of safety-
related control components, and for compliance with their instructions.

USER MANUAL 2.2 | B-EASYCONNECT
Berghof Automation GmbH | Arbachtalstrasse 26 | 72800 Eningen | www.berghof-automation.com
10
1.6 Handling of device
The device is susceptible to impacts, heavy vibration, moisture and extreme temperatures.
1.6.1 Transport and storage
Protect the device against major mechanical stresses during transport.
Always pack the device in its original packaging for transport.
For storage, refer to the applicable statement of ambient conditions (see section: "Technical
Data").
Protect the device against condensation and damp.
1.6.2 Operation
If the device has been stored or transported in cold weather or under conditions or large fluctua-
tions in temperature, do not start to operate it until it has acclimatized to room temperature for the
place it is used.
If condensation is present, wait at least 12 hours before starting to operate the device.
1.6.3 Unpacking
On delivery of the device, a check must be made that it is complete and undamaged.
Check the packaging for external damage.
If the packaging is seriously damaged or if damage to the contents is evident: Do not proceed
further with opening the packaging, instead immediately inform the transport company and your
supplier.
Remove the packaging and keep it safe for subsequent transport.
Check the contents for evidence of damage in transport.
Check the contents for completeness against the order documentation and keep all the delivery
documentation for future reference. The delivery documentation contains important information
about the device and is part of the product.
If you discover damage in transport, or if the equipment delivered does not match the order: Inform
the supplier immediately.