HOW TO ASSEMBLE THE
Wallmount Easel
BEST EASEL
#887100
BEST
ARTIST’S
PRODUCTS
Mounting Easel
on wall:
2 people recommended for Assembly/Wall
Mounting.
1. Remove Easel from Easel Frame
a. Remove bottom two knobs from
top of Easel Frame.
b. Remove screws from hinges at
the bottom of the Easel Frame. (3
from each hinge)
2 options exist for attaching frame
to wall.
- Drywall Toggle bolts
Inside (drilled) holes are for
toggles.
- Wood Screws
Outside (countersunk) holes
are 16"on center for
screwing frame directly to
studs in wall.
2. Hold frame up on wall and mark
where holes will be drilled.
(If screwing to wall, make sure to
mount on studs)
3. Re-attach the Easel to Easel Frame
on wall by first re-connecting hinges
with screws removed earlier(3 from
each hinge).
4. Re-attach top of Easel Frame with
bolts and knobs.
5. Attach bottom canvas holder by
sliding from the top until it comes
to a rest on the bottom stops.
Winch Assembly
(after mounted on wall)
6. Winch will have two rope ends.
Feed rope along lower back pul-
leys, attaching securely to eye-
hooks at top of Easel.
7. Attach pulley handle: remove lock-
ing nut, insert handle, put locking
nut back on and tighten.
8. Insert Easel Mast through channels
at top of Easel. When raising and
lowering Easel Tray, use switch to
engage ratchet up or down.
1a. Remove top knobs 1b. Remove bottom hinges
2. Insert bolts with toggles into holes drilled
through wall if not screwing frame directly
to studs.
5. Attach Canvas Holder to Easel
7. Assemble Winch after tying ropes off to top
of Easel Frame
8. Insert Easel Mast through channels at top of
Easel.
Assembly
Ratchet
Switch
Winch
Handle
Lower Front
Pulley
Bottom
Knob
Top
Knob
Drilled
Holes Countersunk
Holes
Lower Back
Pulley
Best Artist'sMAteriAls - A richeson co. - KiMBerly, Wi - Phone: 1-800-233-2404 richesonArt.coM
