Using your RF Modulator
1 Turn on the TV, then set it to either Channel 3or
4, whichever is not used for regular broadcasts in
your area.
2 Set the RF Modulator’s CHANNEL 3/4 switch to
the same channel you set on the TV (3 or 4).
3 Turn on the AV component that is connected to
the RF Modulator.
4 To view TV channels through a cable/satellite box
or antenna that is connected to the ANT IN jack
on the RF Modulator, turn o the AV component
that is connected to the RCA inputs of the RF
Modulator. The internal A/B switch in the
RF Modulator automatically switches over to the
ANT IN device.
Legal notices
FCC Part 15
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Your modulator might causeTV or radio interference even when is operating
properly. To determine whether your modulator is causing the interference,
turn it o. If the interference goes away, your modulator is causing it.
Try to eliminate the interference by:
• Moving your RF Modulator away from the receiver.
• Connecting your RF Modulator to an outlet that is on a dierent
electrical circuit from the receiver.
• Contacting your local store for help.
If you cannot eliminate the interference, the FCC requires that you stop
using your RF Modulator. Changes or modications not expressly
approved by the party responsible for compliance could void the user’s FCC
authorization to operate this equipment.
ICES-003
This Class B digital apparatus complies with Canadian ICES-003
Important safety instructions
CAUTION: Risk of electric shock. Do not open.
The lightning ash with arrowhead symbol inside a triangle
is intended to alert you to the presence of uninsulated
dangerous voltage within your RF Modulator’s enclosure.This
voltage may be strong enough to cause an electric shock.
The exclamation point inside a triangle is intended to alert
you to important operating and maintenance instructions.
• Read and follow these instructions.
• Retain these instructions for future reference.
• Follow all warnings.
• Do not use your RF modulator near water. Do not expose your RF
modulator to dripping or splashing liquids. Do not place objects lled
with liquid, such as a vase, on top of your RF modulator. Do not expose
your RF modulator to rain. V1 ENGLISH 20-0831
• Clean your RF modulator with a dry cloth only.
• Do not block ventilation openings.
• Do not install near a heat source, such as a radiator, heat register, stove,
or other heat producing device (including an amplier).
• Do not defeat the safety purpose of the polarized plug. A polarized plug
has two blades with one blade wider than the other. The wide blade is a
safety feature. If the plug does not t into your electrical outlet, contact
an electrician to relace the obsolete outlet.
• Do not walk on, set items on, or pinch the power cord, especially at the
plug and the back of your RF modulator.
• Unplug your RF modulator during lightning storms or when you do not
intend to use your RF modulator for an extended period of time.
• Use and store your RF modulator indoors only. Extreme temperatures
and humid environments can damage internal electronic components.
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy Essentials
For customer service, call 866-597-8427 (U.S. and
Canada)
www.bestbuy.com/bestbuyessentials
Best Buy Essentials is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
