Beta Three QS600T User manual

QS600T
6"TwoWay Full Range
Pro Speaker System
User Manual
UM- QS 6 0 0 T - 2 0 1 5 0 3 2 6 v e r A

1
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read the instruction first before using this product.
Pay attention to all warnings.
Obey all operating instructions.
Do not expose this product to rain or moisture.
Do not block any ventilation openings. Install according to instructions .
Do not install this product near any heat source, such as , heater, burner, or any other equipment with heat radiation .
Only use spare parts by manufacturer.
Pay attention to the safety symbol on the of the cover.
manual
Please keep this manual for future reference
Clean this equipment with a dry cloth.
manufacturer's
a
supplied the
outside
SAFETY INSTRUCTIONS
PLEASE READTHIS MANUAL FIRST
Thank you for a buying product. Read this manual first as it will help you operate the system properly. Please keep this manual
for future reference.
WARNING:
Thisproductmustbeinstalledbyprofessionals.When using hangingbracketsorrigging other thanthosesuppliedwith
theproduct,please ensure they complywith thelocalsafetycodes.
Theexclamationpointwithin anequilateraltriangleis intendedto alertyouto thepresenceof important
operatingandservicing instructions.
ATTENTION:Don'trefitthesystem or sparepartswithout being authorizedasthis will .voidthe warranty
WARNING: Don't (suchas candles) theequipment.placenakedflames close to

QS600T
2
4
5
3
3
3
3
4
4
5
5
6
6
6
7
Product information subjects to be updated without
notification, please visit www.elderaudio.com for
latest update.
CONTENT
CONTENT
Features
Description
Applications
CONNECTION
Terminal Plate
INSTALLATION
Installation Accessories
Installation Reference
INTRODUCTION
System Connection Reference
Technical Sheet
Frequency Response And Impedance Curve
2D Dimension
TECHNICAL SPECIFICATION
6"TwoWay Full Range Pro Speaker System

Qs400 adopts multifunctional structure design. it’s
KTV
QS600T
QS600T
3
6"TwoWay Full Range Pro Speaker System
Features
Description
Applications
INTRODUCTION
6"TwoWay Full Range Pro Speaker System
Two new 3-inch paper cone mid-high frequency drivers.
6-inch paper cone low frequency driver.
High intensity injection moulding cabinet.
Dispersion 140° x 160°.
Frequency response 80 Hz 16k Hz (-3dB).
Sensitivity 88dB, Max SPL 120 dB.
3 x M8 hang point.
Customizable grill and cabinet color.
QS600T is a 6"2-way full range speaker system with wide
dispersion. Its sound is nature and clear while the cabinet
is handy, compact and the appearance elegant and
fashionable. It's applicable in small and medium performing
stages, KTV, multi-function halls as sound monitoring and
major and fill sound reinforcement.
QS600T adopts two 3-inch new paper cone high frequency
speakers which greatly enhance the performance and power
loading capacity in the mid-high frequencies.The optimized
6-inch low frequency driver can realize highest clearance
and lowest distortion in high sound pressure.The 12 dB
attenuation slope cross frequency circuit enables smooth
frequency response. And the full range circuit protecting
system provides higher security.
The cabinet is injection moulded with high intensity
polypropylene.The delicate designed shape provides best
structure strength and acoustic characteristics.The colors
of grill and cabinet are available for customization.
applicable both in mobile and stage performance. Our
special designed accessories with the 3 x M8 hanging point
can be used in various installation requirements easily and
conveniently.
.
. Multifunction Rooms
Public Avenue
Monitor
Small Performance

QS600T
CHA
BRIDGE IN
CHB
SIGNAL GND
SIGNAL +
SIGNAL -
BRIDGE
PARALLEL
STEREO ON
OFF
50HZ
25HZ
ON
OFF
CHB OUTPUT
CHA OUTPUT
POWER
CABLE
FUSE
-
B
+
-
A
+
-
+
5HZ
CAUTION
BRIDGE
OUTPUT ASSIGNMENT:
BRIDGE MONO OUTPUT:
CHA :
PIN1+ : SIGNAL GND
CHA: PIN 1+ :
PIN 1 - :
PIN 2+ :
PIN 2 - :
CHA SIGNAL
CHA GND
CHB SIGNAL
CHB GND
CHB: PIN 1+ :
PIN 1 - :
PIN 2+ :
PIN 2 - :
CHB SIGNAL
CHB GND
PIN2+ :
!
Serial no:
Special design for big power！
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODE LF FILTER GROUND
CLIPLIMITER
INPUT
PIN1:
PIN2:
PIN3:
4
Red：1+ Black：1-
1+
1- Crossover
+
-
+
-
+
-
LOW
HIGH
HIGH
QS600T QS600T
6"TwoWay Full Range Pro Speaker System CONNECTION
Terminal Plate
System Connection Reference
Attention: The impedance of connected speaker must match the impedance of amplifier output.
Attention: Make sure the polarity of speaker and amplifier correctly.
QS 600T connects the amplifier with a wire clamp.

QS600T
5
1. Ceiling
2.Wall
3. Support
For 35 mm diameter tripod
6"TwoWay Full Range Pro Speaker System
INSTALLATION
Installation Accessories Installation Reference
Warning:
safety factor not less than 5:1 or meet the local
standard during installation .
Make sure the mounting accessories
QS600T has 3 hanging points to work together with the
special designed accessories for fast and convenient
hanging, wall-mounting and on standing with adjustable
angles.
1. Hanging Bracket
2.Wall Bracket
3. Standing Bracket

(W x H x H)
(W x H x H)
SpeakerTesting Method
1. Frequency response
Use Pink noise to test the speaker in the anechoic room,
adjust the level to make the speaker work at its rated
impedance and the power output is 1W, then test the
frequency response 1m away from the speaker.
2. Sensitivity
Use full range Pink noise which was modified by EQ curve
to test the speaker in the anechoic room, enlarge the signal
to make the speaker work at its rated impedance and the
power output is 1W, then test the sensitivity 1m away from
the speaker.
3. MAX.SPL
Use full range Pink noise which was modified by EQ curve
to test the speaker in the anechoic room, enlarge the signal
to make the speaker work at its instant power output level,
then test the SPL 1m away from the speaker.
4. Rated Power
Use the pink noise according to IEC#268-5 to test the speaker,
enlarge the signal for continuous 100hours, the rated Power
is the power when the speaker will not incur hot damage or
mechanics damage.
QS600T
2×3 High frequency drivers"
80Hz-16kHz
1×6 Woofer"
6
6"TwoWay Full Range Pro Speaker System TECHNICAL SPECIFICATION
Technical Sheet
Frequency Response And Impedance Curve
Frequency response curve
Impedance curve
Two way full range speaker
Tweeter:
1
System:
Woofer :
Frequency response(-3dB):
88dB
8 Ohms
140° x 160°
114dB/120dB(PEAK)
2.5 kHz
3×M8 Bracket lifting point
Cabinet Exterior with/without
polyurethane spraying treatment
(depends on colors)Grill with cloth
4
80W (RMS)
160W (MUSIC)
320W (PEAK )
Dispersion(H¡Á V):
2
3
Sensitivity(1W@1m):
Max.SPL(1m):
Power:
Rated impedance:
Cabinet:
Mounting accessories:
Painting:
Cabinet dimension:
Package dimension:
N.W.(2pcs):
G.W.(2pcs):
Connector:
Crossover point:
Wire clamp
Polypropylene injection moulding
10kg(22 lb.)
399mm×241mm×229mm
(15.7in×9.5in×9in)
9kg(19.8 lb.)
452mm×310mm×525mm
(17.8in×12.2in×20.1in)
50
30
20
8
5
Impedance (Ohms)
5k 10k 20k
13
Sensitivity (dB)
20
50
60
70
80
90
100
Frequency (Hz)
50 100 200 500 2k1k

399mm
[15.7in]
Toy view
Front view
Side view Back view
QS600T
7
229mm
[9in]
241mm
[9.5in]
6"TwoWay Full Range Pro Speaker System
TECHNICAL SPECIFICATION
2D Dimension
Bottom view

Notes: