×
×
(W DH)
×
×
(W DH)
6
Sensitivity (dB)
20
70
80
90
100
110
120
60
28
12
7
Frequency (Hz)
Impedance (Ohms)
50 100 200 500 2k 5k 10k 20k
1k
T15
20
40
Frequency response curve & Impedance curve
40Hz-18kHz
96dB
300W (RMS)
600W(MUSIC)
1200W(PEAK)
8 Ohms
NL4×2
Max. SPL(1m): 119dB/125dB(PEAK)
2
3
4
Sensitivity(1W@1m):
Power:
System:
Frequency response(-10dB):
Rated impedance:
Cabinet:
Connector:
Cabinet dimension:
Package dimension:
Technical Specification
Mounting accessories:
Painting:
Net weight:
Gross weight:
SpeakerTesting Method
1. Frequency Response
Use Pink noise to test the speaker in the anechoic chamber,
adjust the level to make the speaker work at its rated impedance
and set the output power at 1W, then test the frequency response
1m away from the speaker.
2. Sensitivity
Use full range Pink noise which has been modified using
an EQ curve to test the speaker in the anechoic chamber,
increasing the signal to make the speaker work at its rated
impedance and set the power output at 1W, then test the
sensitivity 1m away from the speaker.
3. MAX.SPL
Use full range Pink noise which has been modified using
an EQ curve to test the speaker in the anechoic chamber ,
increase the signal to make the speaker work at its
maximum power output level, then test the SPL1m away
from the speaker.
4. Rated Power
Use Pink noise to the IEC#268-5 standard to test the speaker,
increase the signal for a continuous period of100 hours,
the rated power is the power when the speaker will show
no visible or measurable damage.
1×1.7 HF"1×15 LF,"
System components:
Frequency response curve
Impedance curve
THUNDER Series Pro Loudspeaker System TECHNICAL SPECIFICATION
TwoWay15" Full Range
Passive Speaker
462×397×780mm
(18.2×15.6×30.7in)
528×480×865mm
(20.8×18.9×34.1in)
26.8kg(59.0 lb.)
28.5kg(62.7 lb.)
Dispersion(H×V):
Handle:
45Hz-17kHz
1
Frequency response(-3dB):
°°
90 ×60
Optional accessory: U-Bracket
Powered coated grill
8×M8 hanging point,
SMART pole mount system
Polypropylene injection moulding
Two side, one rear