Electro-Voice EVID 6.2 User manual

Model 6.2
Extended Range
High Output Speaker
Technical Specifications:
General Description:
The EVID 6.2 is an extended-range loudspeaker ideal for
indoor and outdoor applications requiring high-quality sound.
Its extended range and smooth bass provide ample SPL
levels in larger environments such as shopping malls, sports
bars, health clubs, and so on.
The 6.2’s three-dimensional elliptic baffle symmetrically
locates the 1” Ti direct radiator high-frequency element with a
Coherent Coverage Waveguide in front of and between the
6” low-frequency drivers. The careful shaping, location, and
10° splaying of the LF units provide coverage control by the
resulting line array. Lobing is controlled by physically
“shadowing” the LF transducers from each other over the
bandwidth where they would normally exhibit interference.
EVID’s mounting system provides greater range of aiming
angles in both horizontal and vertical planes than other types.
The curved grille features designed-in weather resistance
and a hidden leash for safety.
All models are available in black or white, and can easily be
painted to match the décor. Transformer versions are also
available for constant voltage systems.
Key Features:
• Line-array enhanced coverage control
• Organic, unobtrusive shape
• Strong-Arm-Mount™for easy, flexible
aiming
• Full-bandwidth overload protection
• Weather resistant - Conforms to Mil
Spec 810 and IEC 529 IP 34
• Dual 6-inch LF transducers for extended
bass and greater power handling and
output
• Ti direct-radiator HF transducer, Neody-
mium structure
• High sensitivity
• Magnetically shielded
• Zinc-plated grilles
• Transformer Versions
esnopseRycneuqerF
1
)Bd01-(zHk02-zH26
gnildnaHrewoP
2
k
aePW006/.gorP.tnoCW003
ytivitisneS
3
m1/W1,Bd49
ecnadepmIsmho8
LPSxaMBd811
egarevoClatnoziroH
4
°001
egarevoClacitreV
4
°08
ycneuqerFrevossorCzHk6.1
recudsnarTFL)mm001(”6x2
recudsnarTFH)mm52(”1
noitcetorPmetsySlluF
ecnatsiseRrehta
eW ,ytidimuh018cepSliMsteeM dnaerutarepmet,yarpstlas 43PI925CEIdna,VU sgnitarfoorphsalps
noitatoRxgniwS°09x
°001
slanimreTgnirpS
lairetaMerusolcnE)elbatniap(SBA
spaTegattaWnoisreV”t“ W5.7:V07 W06,W03,W51:V001/V07
)DxW
xH(miD xmm914(”57.11x"9x”5.61 )mm892xmm822
)hcae(thgieWteN)gk3.5(sbl21
)riap(thgieWgnippihS)gk3.21(sbl72
seirosseccAdedulcnIMAS
™
yekxeh,
1
)gnitnuomllaw(ecapSflaH
2
esionknipsuounitnocnahtretaergBd3:gnitaRmargorPsuouonitnoC )rotcaftsercBd6htiwesionknipdepahs-CEI(gnit
ar
3
)gnitnuomllaw(ecapSflaH:gvA
4
enalplacitrevnisixagnolhtiwdetnuomnehW

Architecture & Engineering Specs:
Theloudspeakershallbeatwo-waysystemconsistingoftwo6”(152mm)
low-frequency transducers, a 1” (25mm) high-frequency transducer with
a Coherent Coverage Waveguide, and a frequency-dividing network
installed in a vented, line-array enclosure. The network shall include a
passivelimiterforboththelow-frequencyandhigh-frequencytransducers.
The loudspeaker system shall meet the following performance criteria:
Powerhandling,300-WattsofEIARS-426Acontinuouspinknoise(6dB
crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated
sensitivity);Pressuresensitivity,94dBatonewatt,200Hz-10kHzatone
meter;Impedance,8ohmsnominal,6ohmsminimum.Thehigh-frequency
transducer shall drive a waveguide to cover evenly 100° horizontally by
90°vertically.The enclosure shall be moldedofacrylicbutylstyrene.The
enclosure shall be 16.5” (419mm) high, 9” (228mm) wide, 11.75”
(298mm) deep. The finish shall be a paintable black or white. The grille
shall be zinc plated, powder coated for corrosion resistance, and
restrained with a safety leash. The loudspeaker shall be adjustable over
a range of 100° horizontally and 90° vertically. The support bracket shall
belowprofileandintegralwiththeenclosure.Thesystemshallbeweather
resistanttoMILSpec810 andIEC529IP34testconditions. Thesurface
mount loudspeaker shall be the Electro-Voice® EVID model 6.2.
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: [phone]
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax: [phone]
www.electrovoice.com
© Telex Communications, Inc. 12/2005
Part Number 38109-983 Rev E
Beamwidth:
Frequency Response:
Directivity:
Block Diagram:
Side
Wall Plate
Front
Top
Performance Match:
• EVID12.1 Sub
Available Accessories:
• VS-6 Vertical Mount Desk Stand for 6.2
• AB-ZE Array Bracket Kit for 2 or 4 ZX1i or EVID Systems, Black
• TC-6B Black Weatherized Terminal Cover for 6.2
• TC-6W White Weatherized Terminal Cover for 6.2
EVID 6.2 Part Numbers:
301047-001 Black
301047-002 White
301047-003 Black, Transformer
301047-004 White, Transformer
INPUT
LPF
HPF
Passive
Limiter
+
Dimension Drawings: