Better Bathrooms BeBa 25960 User manual

Product
BeBa_25960 - Camden Double-handle basin mixer Chrome
BeBa_25965 - Camden Double-handle basin mixer Matt Black
BeBa_25970 - Camden Double-handle basin mixer Brushed Brass
BeBa_25962 - Camden Double-handle extended basin mixer Chrome
BeBa_25967 - Camden Double-handle extended basin mixer Matt Black
BeBa_25972 - Camden Double-handle extended basin mixer Brushed Brass
•Single-person assembly
•Tools required
•We always recommend using professional
tradespeople to install your product V1_09/9/2021

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
•log in to your account and contact our customer services team via your self-serve
portal –betterbathrooms.com/CustomerAccount/Login
•contact us via betterbathrooms.com/content/contact-us
Important information
•Please read these instructions thoroughly and retain for future reference
•Installation must be carried out in compliance with The Water Fittings Regulations
and Scottish Water Byelaws.
•The system must be flushed prior to installation
•Minimum and Maximum working pressure : 0.5 - 5 bar
•Pressures must be equal for optimum performance
•Please do not connect hot and cold water supply lines in reverse. This could result
in hot water flowing from cold line and cause scalding.
•The feed-water temperature of water shall not exceed 85°C.
Exceeding 85°may cause scalding, the service life of faucets might be shortened,
or the faucet might be damaged.
•After installation, please make sure the faucet is securely mounted and checked for
leaks.

Parts / Diagrams
No
Description
No
Description
1
Aerator
14
O-ring
2
Housing
15
Screw
3
O-ring
16
Cross handle
4
Spout
17
Plastic ring
5
O-ring
18
Dome
6
Locknut
19
O-ring
7
O-ring
20
Headwork cold supply
8
Plastic ring
21
Headwork Hot supply
9
Adaptor
22
Base
10
O-ring
23
O-ring
11
body
24
O-ring
12
Ceramic cap
25
Flexible hose
13
Cover
26
Fixing kit
No
Description
No
Description
1
Aerator
14
O-ring
2
Housing
15
Screw
3
O-ring
16
Cross handle
4
Spout
17
Plastic ring
5
O-ring
18
Dome
6
Locknut
19
Headwork cold
supply
7
O-ring
20
Headwork hot
supply
8
Plastic ring
21
Extended body
9
Adaptor
22
Base
10
O-ring
23
O-ring
11
Body
24
Mounting fixing kit
12
Ceramic cap
25
O-ring
13
Cover
26
Flexible hose

Dimensions
Tools required
•Spanner
•Srew driver
Installation
BeBa_25960/BeBa_25965/BeBa_25970：
Install the two inlet hoses(6C) into the
faucet(6A), these should only be hand
tightened.
Next fit Fixing bar (6B) into the mixer body and
tighten.
Ensure the o-ring (23) is fitted between the

base and basin/top
From above basin, push the inlet hoses(6C)
and fixing bar (6B) through the hole on basin
and position correctly.
BeBa_25962/BeBa_25967/BeBa_25972：
Remove the mounting hardware kit(6B) from
the faucet;
Install the two inlet hoses(6C) into the
faucet(6A), these should only be hand
tightened.
Ensure the o-ring (23) is fitted between the
base and basin/top
From above basin, push the inlet hoses(6C)
through the hole on basin and position
correctly.
Do not allow the hoses to be kinked or
twisted
BeBa_25960/BeBa_25965/BeBa_25970：
From underneath basin, secure mixer body
(7A) by placing Rubber Washer(7F), Metal
Washer(7B) onto the Fixing Bar (6B), followed
by Fixing Nut (7C).
Tighten Fixing Nut(7C) until mixer is secure, do
not overtighten as this could crack the ceramic.
BeBa_25962/BeBa_25967/BeBa_25972：
From underneath basin, secure mixer body
(7A) by placing Rubber Washer(7B), Metal
Washer(7C) onto the threaded pipe (7F),
followed by Fixing locknut (7D) and
screws(7E).
Tighten Fixing locknut(7D) and screws(7E) until
mixer is secure, do not overtighten as this could
crack the ceramic.

Check the washers are fitted into the nut on the
hot and cold flexible hoses.
Connect the hot and cold flexible hoses to the
isolation valves (not included), hot on the left,
cold on the right.
Turn on water supply and check for leaks.
Operation
Troubleshooting
Issues
Inspection Item
Poor water flow
•Is there blockage within the filter mesh on
aerator
•Is the flexible hose kinked or twisted
•Was the system flushed prior to installation
•Is the mixer cartridge free from debris
Water leak
•Is there damage or dirt within the O-rings of the
cartridge
•Is there damage or dirt with the rubber washers
in the of aerator
•Is the locknut on top of cartridge fully tightened
•Is there damage within the rubber washer inside
the nuts of flexible hoses
•Is there damage with the O-rings on the flexible
hoses
Handle loose
•Is the screw inside the handle fully tightened
•Is the locknut on top of cartridge fully tightened

Body loose
•Is the fixing kit underneath fully tightened
Maintenance
Cleaning

To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do
not use any abrasive cleaning agents or materials. If any harsh chemicals come into
contact with the surface of the product, rinse and wipe clean immediately.