Better Bathrooms BeBa 25964 User manual

Product
BeBa_25964 - Camden Floor-standing bath filler Chrome
BeBa_25969 - Camden Floor-standing bath filler Matt Black
BeBa_25974 - Camden Floor-standing bath filler Brushed Brass
•Single-person assembly
•Tools required
•We always recommend using professional
tradespeople to install your product V1_09/9/2021

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should
any problems occur, please:
•log in to your account and contact our customer services team via your self-serve
portal –betterbathrooms.com/CustomerAccount/Login
•contact us via betterbathrooms.com/content/contact-us
Important information
•Please read these instructions thoroughly and retain for future reference
•Installation must be carried out in compliance with The Water Fittings Regulations
and Scottish Water Byelaws.
•The system must be flushed prior to installation
•Minimum and Maximum working pressure : 0.5 - 5 bar
•Pressures must be equal for optimum performance
•Please do not connect hot and cold water supply lines in reverse. This could result
in hot water flowing from cold line and cause scalding.
•The feed-water temperature of water shall not exceed 85°C.
Exceeding 85°may cause scalding, the service life of faucets might be shortened,
or the faucet might be damaged.
•After installation, please make sure the faucet is securely mounted and checked for
leaks.

Parts / Diagrams
No
Part
Description
No
Part
Description
1
Ceramic cap
22
Body
2
Cover
23
Cover
3
O-ring
24
Cap
4
Screw
25
G3/4 fixing
nut
5
Cross
handle
26
O-ring
6
Plastic ring
27
Connector
7
Dome
28
Standing
pipe
8
O-ring
29
O-ring
9
Headwork
hot supply
30
Decorative
ring
10
Headwork
cold supply
31
O-ring
11
Aerator
32
Inlet pipe
12
O-ring
33
O-ring
13
Housing
34
Flange
14
O-ring
35
Bolt
15
Spout
36
Locknut
16
O-ring
37
Connector
17
Locknut
38
Cover
template
18
O-ring
39
Floor screw
set
19
Plastic ring
40
Body
20
Adaptor
41
G3/4
connector
21
O-ring
42
Aerator key

Dimensions
Tools required
•Spanner
•Drill and bit
•Hammer

Installation
Mark out the fixing positions on the flooring basing
on the body and drill four holes. Fix the floor
screws into the holes.
Fix the G3/4 connectors to inlets of the body. Push
the body over floor screws and fasten with steel
gasket and nut. Connect the body with hot (Left)
and cold (right)water pipes using thread seal tape.

Remove the screws on the cover template with
allen key, and take out the cover template.
Thrust the connectors vertically into the two inlet
holes of the body.
Press the locknut onto the body. Fix and fasten the
screws with allen key.
Slide down the bases until it reaches the floor.
Waterproof adhesive is recommended to be
applied.
Turn on water supply and check for leaks.

Operation
Troubleshooting
Issues
Inspection Item
Poor water flow
•Is there blockage within the filter mesh on
aerator
•Was the system flushed prior to installation
•Is the mixer cartridge free from debris
Water leak
•Is there damage or dirt within the O-rings of the
cartridge
•Is there damage or dirt with the rubber washers
in the of aerator
•Is the locknut on top of cartridge fully tightened
Handle loose
•Is the screw inside the handle fully tightened
•Is the locknut on top of cartridge fully tightened
Body loose
•Is the floor-mounting kit underneath fully
tightened

Maintenance
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do
not use any abrasive cleaning agents or materials. If any harsh chemicals come into
contact with the surface of the product, rinse and wipe clean immediately.